Panasonic KV-S3105C / KV-S3085 (serv.man3) Service Manual ▷ View online
7.3. Cleaning the scanning section glass and reference plate
(1) Turn the power off.
(2) Using your hand, pull the Front Door Release towards you.
Note 1.
The Front Door now opens slowly.
Note 2.
After scanning operations, the surfaces around the
scanning section glasses and the reference plates
may be hot. Wait for them to cool before cleaning
inside the scanner.
scanning section glasses and the reference plates
may be hot. Wait for them to cool before cleaning
inside the scanner.
(3) Clean the Scanning Section Glasses (Target Glasses
(Front), (Back)) and Reference Plates (Reference Plate
(Front), Reference Plate (Back)) using the accessory Roller
Cleaning Paper.
(Front), Reference Plate (Back)) using the accessory Roller
Cleaning Paper.
(4) Close the Front Door.
Note for the Roller Cleaning Paper
Open the bag by the dotted line and take out the Roller Cleaning Paper.
· If the bag is left open for a long period of time before using it, the alcohol will evaporate. Please use the Roller
· If the bag is left open for a long period of time before using it, the alcohol will evaporate. Please use the Roller
Cleaning Paper immediately after opening the bag.
The Roller Cleaning Paper (Model No. KV-SS03) is available via sales route.
37
KV-S3105CSERIES / KV-S3085SERIES
7.4. Cleaning Sensors
(1) Turn the power off.
(2) Using your hand, pull the Front Door Release towards you.
Note
The Front Door now opens slowly.
(3) Remove the dirt on the Document Sensors (Starting
Position, Skew (L), Skew (R)), Edge Limit Sensors, Black
Sheets, Double Feed Detectors ((Generate), (Receive)),
and Paper Detector with the included blower.
Sheets, Double Feed Detectors ((Generate), (Receive)),
and Paper Detector with the included blower.
(4) Open the Back Door by pulling the Back Door Release, and
open the Post Imprinter Door.
(5) Also remove the dirt on the Document Sensors (Exit (Front),
Exit (Rear)) and Paper Jam Sensor with included blower.
How to clean the Document Sensor, Double Feed Detector or Paper Detector.
Remove the brush and blow off the dirt through each hole of the sensors and detectors.
38
KV-S3105CSERIES / KV-S3085SERIES
7.5. Replacing Limited Life Parts
7.5.1. Replacing the Paper Feed Roller Module
(1) Turn the power off.
(2) Using your hand, pull the Front Door Release towards you.
Note
The Front Door now opens slowly.
(3) Use your fingers to push down the two Green Levers at
both ends of the Paper Feed Roller Module.
Note
When moving the Green Levers, do not apply
pressure in any other direction than the arrows.
Otherwise, they may be broken.
pressure in any other direction than the arrows.
Otherwise, they may be broken.
(4) Remove the Paper Feed Roller Module by removing its
bearing from the guide groove of the Chassis in the
Scanner.
Scanner.
(5) Open the optional “Roller Exchange Kit” (KV-SS026 or KV-
SS027), and take out the Paper Feed Roller Module.
39
KV-S3105CSERIES / KV-S3085SERIES
(6) Install the new Paper Feed Roller Module with its gear to
the right.
Note
· Attach the bearings at both ends of the Paper
Feed Roller Module into the guide grooves of the
chassis in the Scanner.
chassis in the Scanner.
· Insert the Paper Feed Roller Cover into the Paper
Feed Roller Hole before attaching the bearing
into the grooves of the chassis.
into the grooves of the chassis.
(7) Push up the Green Levers at both ends in the direction of
the arrow until they click into position.
40
KV-S3105CSERIES / KV-S3085SERIES
Click on the first or last page to see other KV-S3105C / KV-S3085 (serv.man3) service manuals if exist.