Panasonic KV-S3105C / KV-S3085 (serv.man3) Service Manual ▷ View online
4.9. Others
4.9.1. Selecting the paper path for scanned document
Change the Pointer Lever position as required.
(1) When making the document exit to the upper-front position
→ Push the Pointer Lever upwards
(2) When making the document exit to the lower-back position
(Straight pass mode)
→ Push the Pointer Lever downwards
→ Push the Pointer Lever downwards
Note:
For thicker paper scanning, we recommend the
straight paper path.
straight paper path.
4.9.2. Setting the ADF Selector
Depending upon the paper quality, set the ADF Selector.
(1) By setting the ADF Selector to “MANUAL” position, the
Retard Roller is separated from the Separation Roller. By
this operation, multiple sheet will be scanned as a piece of
document.
(This selection is used in case of scanning documents one
by one.)
this operation, multiple sheet will be scanned as a piece of
document.
(This selection is used in case of scanning documents one
by one.)
(2) On the other hand, by setting the ADF Selector to “1, 2, 3,
4, or 5” position, the Retard Roller exerts a manipulation
force onto the documents, and the documents are
separated by this manipulation.
force onto the documents, and the documents are
separated by this manipulation.
Note:
In proportion to the increment of the number
(1
(1
→2→3→4→5) on the ADF Selector, the contact
force between the Retard and Separation Rollers
goes up.
(When scanning plain paper, set the selector to “2”
or “3”.)
goes up.
(When scanning plain paper, set the selector to “2”
or “3”.)
21
KV-S3105CSERIES / KV-S3085SERIES
5 SECTIONAL VIEWS
5.1. Motor and Mechanism
Conveyor Rollers
Conveyor Roller
Pointer
Conveyor Belt 1
Back Side Lamp Module
Conveyor Belt 2
Back Side Optical Unit
(with CCD [BACK] Board)
(with CCD [BACK] Board)
Drive Rollers
Drive Roller
Conveyor Motor
Hopper Tray
Document
Guides
Guides
Front Side Lamp Module
Front Side Optical Unit
(with CCD [FRONT] Board)
(with CCD [FRONT] Board)
Front Exit Roller
Double Feed Detector [Receive]
SKEW [L] Board
RETARD [POSITION] Board
RELAY [LOWER] Board
Separation Roller
Paper Feed Roller
Retard Roller
ADF Adjustment Cam
Paper Feed Motor
Paper Feed Belt
SKEW [R]
Board
Board
22
KV-S3105CSERIES / KV-S3085SERIES
5.2. Circuit Boards
PANEL Board
LAMP INVERTER Board
MOTHER Board
CONTROL Board
POWER Board
Fan
Fan
DRIVE Board
INTERFACE Board
CONTROL Board
LCD Board
23
KV-S3105CSERIES / KV-S3085SERIES
5.3. Sensors (Boards)
Hopper Angle Sensor (A)
(HOPPER [ANGLE] Board)
(HOPPER [ANGLE] Board)
Hopper Position
Sensor (T, B)
(HOPPER [POSITION] Board)
Sensor (T, B)
(HOPPER [POSITION] Board)
Paper Detector (P)
Waiting Sensor (W)
(SKEW [L] Board)
(SKEW [L] Board)
(HOPPER [CONNECTOR]
Board)
Board)
Pointer Detector (p)
(POINTER Board)
(POINTER Board)
Post Imprinter
Door Sensor (T)
(POST IMPRINTER
DOOR Board)
Door Sensor (T)
(POST IMPRINTER
DOOR Board)
Exit [Front] Sensor (E)
(EXIT [FRONT] Board)
(EXIT [FRONT] Board)
Paper Jam Sensor (J)
(JAM Board)
(JAM Board)
(RELAY [UPPER]
Board)
Board)
Exit [Rear] Sensor (e)
Edge Limit [R] Sensor (r)
(SKEW [R] Board)
(SKEW [R] Board)
Skew [R] Sensor (R)
(SKEW [R] Board)
(SKEW [R] Board)
Starting Position Sensor (S)
(SKEW [L] Board)
(SKEW [L] Board)
Skew [L] Sensor (L)
(SKEW [L] Board)
(SKEW [L] Board)
Edge Limit [L] Sensor (I)
(SKEW [L] Board)
(SKEW [L] Board)
Double Feed
Detector [Generate]
Detector [Generate]
Double Feed
Detector [Receive]
Detector [Receive]
Size Detector (1 5)
(SIZE Board)
(SIZE Board)
24
KV-S3105CSERIES / KV-S3085SERIES
Click on the first or last page to see other KV-S3105C / KV-S3085 (serv.man3) service manuals if exist.