Panasonic NC-PF30PV Service Manual ▷ View online
- 17 -
NC-PF30PV
2.9. Gauge cover
Press clear part of Gauge Cover from inner body by
thumb and remove it.
2.10. Lid comp., Inner lid
1. Remove 4 screws off.
2. Remove Inner lid off.
Body
Push by thumb
Gauge cover
Fig. 10
Fig. 11
Tapping screws M (4 x 12)
Inner lid
Packing A
Seal packing B
Lid comp.
- 18 -
NC-PF30PV
Steam way A
2.11. Lid packing, Steam way A
1. Remove Steam way A.
2. Remove Lid packing.
Lid packing
Fig. 12
2.12. Lid, Pump comp.
1. Remove 4 screws off.
2. Use minus screwdriver to pry between Lid and
Pump comp.
Fig. 13
Tapping screw.
M (4 x 12)
Pump comp.
Lid
- 19 -
NC-PF30PV
2.13. Valve A, Spring B, Seal ring
1. Remove Valve A from Pump comp..
2. Remove Spring B off.
3. Remove Seal ring A from Valve A.
Fig. 14
Fig. 15
Valve A
Seal ring
Spring B
Leg
Leg
2.14. Shaft
Push lower part of Pump comp. and push 4 legs of Shaft then pull out.
Shaft
Push
Leg
Leg
Shaft
Push
Push
Push
- 20 -
NC-PF30PV
2.15. Lock knob A, Lock spring A,
Lock spring B
1. Catch Lock spring A by wrench and pull out.
2. Follow The first section and remove Lock spring B.
3. Remove Lock knob B off.
2.16. Supporting Plate
1. Adjust lock pin of Supporting plate at “Release”.
2. Remove Supporting plate off.
Operating point
When assemble, make sure that Caution label is on
the correct position.
Fig. 16
Lock spring A
Lock spring B
Lock spring B
Fig. 17
Supporting plate
Lid slot
Supporting plate
Click on the first or last page to see other NC-PF30PV service manuals if exist.