Panasonic EP-1270-W0 Service Manual ▷ View online
- 21 -
5.
Unscrew two screws on each Massage wheel cover side
plates and remove the Massage wheel cover side plates.
6.
Cut off three Insulated ties (A) on the right side and
unscrew a bolt on each sides.
Remove the Massage wheel cover.
7.5. Removing the Power source switch box
1.
Unscrew two screws on the inner side.
- 22 -
2.
Unscrew two screws.
3.
Remove the Bushing cover and pull out the Controller
cord and take off the Connector.
- 23 -
7.6. Removing the Under box
1.
Unscrew two Push-turn rivets on both sides.
2.
Unscrew four screws and remove the Under box top cover.
3.
Unscrew two screws each on the Under box top left
cover and the Under box top right cover and remove
both covers.
4.
Pull out the Hoses on both sides.
- 24 -
5.
Remove two Fittings (A), three Insulated ties (B), three
Ground wires (C), and disconnect the Connectors.
Then, you can take out the Under box.
A: Air pump
B: Thee-way electromagnetic valve
C: Two-way electromagnetic valve
D: Three-way three-row electromagnetic valve
E: Power source transformer
F: Main PCB
G: Sub Transformer
Click on the first or last page to see other EP-1270-W0 service manuals if exist.