Panasonic EP-1270-W0 Service Manual ▷ View online
- 17 -
11. Unscrew three screws (A) on the Tapping shaft holder
on each sides and unscrew four screws (B) on the
Massage gear block.
12. Unscrew four screws and remove the Massage gear block.
- 18 -
13. Unscrew three screws.
14. Unscrew one screw and remove the Up/down revolution
sensor.
15. Unscrew four screws and remove the Up/down motor.
- 19 -
16. Unscrew three screws on each Rail piece sets.
* When you remove the Massage mechanism block frame,
be sure to hold the right Guide roller so that its Spring may not
spring out.
17. Unscrew four screws (A) and slide the Shaft holder (B)
inward and remove the Up/down gear block.
18. You can proceed the procedures from 1 to 14 with the
Massage mechanism block on.
However, you can remove the Massage mechanism block
first for your conveniences before working on the parts of the
Massage mechanism blocki.
- 20 -
7.4. Removing the Massage wheel cover
1.
Proceed the procedures 1. to 7. of 7.1. Removing the
Head rest, Back rest cushion, Arm rest.
2.
Cut off the Insulated ties and remove four Brushclips.
3.
Unscrew eight screws.
4.
Cut off five Insulated ties.
Click on the first or last page to see other EP-1270-W0 service manuals if exist.