Panasonic UF-580 / UF-590 / UF-780 / UF-790 / UF-5100 / UF-6000 / UF-6100 Service Manual ▷ View online
37
2.2.10.
SC PC Board (1001), ILS PC Board (1006), SNS4 PC Board (1007)
(1) Remove the Left Cover (Refer to 2.2.2.).
(2) Disconnect all Connectors on SC PC Board.
(3) Remove 9 Screws (19).
(2) Disconnect all Connectors on SC PC Board.
(3) Remove 9 Screws (19).
(7 Screws for UF-580/780)
(4) Remove the SC PC Board (1001).
(5) Move all Harnesses away from the front of the
Door Sensor.
(6) Release the Latch Hook and remove the ILS PC
Board (1006).
(7) Disconnect Connector CN73 on the ILS PC
Board (1006).
(8) Disconnect Connectors CN85 and 87 on the
SNS4 PC Board.
(9) Remove 1 Screw (19).
(10) Lift up the Paper Exit Actuator (730) and
remove the SNS4 PC Board (1007).
(3)x9
(3)
(2)
(7)
(6)
(9)
(8)
(10)
38
2.2.11.
Paper Feed Solenoid (531), Clutch Gear Assembly, Paper Feed Roller (518)
(1) Remove the Right Cover (102) (Refer to 2.2.2.).
(2) Remove 1 Screw (19).
(3) Remove the Paper Feed Solenoid (531).
(2) Remove 1 Screw (19).
(3) Remove the Paper Feed Solenoid (531).
Note:
If the Paper Feed Solenoid does not work properly
due to dust, etc. Remove the spring to
disassemble and clean the magnet and plate as
illustrated.
due to dust, etc. Remove the spring to
disassemble and clean the magnet and plate as
illustrated.
(4) Remove 1 Screw (19).
(5) Remove the Feed Roller Ground Spring (628).
(6) Remove the Snap Ring (B9).
(7) Remove the Clutch Gear Assembly.
(5) Remove the Feed Roller Ground Spring (628).
(6) Remove the Snap Ring (B9).
(7) Remove the Clutch Gear Assembly.
(8) Place the machine on its Rear side.
(9) Remove 2 Screws (19).
(9) Remove 2 Screws (19).
(10) Remove the Feed Roller Assembly.
Clean the Paper Feed Rollers (518) with a soft cloth,
soaked with isopropyl alcohol.
soaked with isopropyl alcohol.
(2)
(3)
(4)
(5)
(6)
(7)
(9)
(10)
39
(11) Remove 2 Screws (4N).
(12) Remove the Paper Feed Rollers (518).
(11)
(12)
40
2.2.12.
Printer Cover (106), Rear Cover (105), Printer Motor (626)
(1) Remove the Left Cover and the Right Cover
(Refer to 2.2.2.).
(2) Release the hooks and remove the Printer
Cover (106).
(3) Remove 2 Silver Screws (B1).
(4) Remove the Rear Cover (105).
(4) Remove the Rear Cover (105).
(5) Remove 1 Screw (19).
(6) Remove the Ground Wire (542).
(7) Disconnect the Connector from the Printer
(6) Remove the Ground Wire (542).
(7) Disconnect the Connector from the Printer
Motor.
(8) Remove 5 Screws (19).
(9) Remove the Printer Motor Bracket (616)
(9) Remove the Printer Motor Bracket (616)
Assembly.
Caution:
The Gears underneath may dislodge when the
Motor Bracket is removed.
Motor Bracket is removed.
(10) Remove 2 Screws (4N).
(11) Remove the Printer Motor (626).
(2)
(3)
(4)
(5)
(6)
(7)
(8)x5
(9)
(10)
(11)
Click on the first or last page to see other UF-580 / UF-590 / UF-780 / UF-790 / UF-5100 / UF-6000 / UF-6100 service manuals if exist.