Panasonic UF-580 / UF-590 / UF-780 / UF-790 / UF-5100 / UF-6000 / UF-6100 Service Manual ▷ View online
25
2
D
isassembly Instructions
2.1.
General Disassembly Flowchart
Paper Cassette
2.2.1
Open Control
Panel Unit
Open Printer Cover
(XXX)
X.X
NCU PC Board
(402)
2.14
NCU PC Board
(402)
2.14
Power Supply Unit
(1002)
2.2.13
Fuser Unit
(701)
2.2.14
Fuser Lamp
(732)
2.2.15
Exit Roller
(719)
2.2.15
Fuser Roller
(709)
2.2.15
Pressure Roller
(706)
2.2.15
Rear Cover
(XXX)
X.X
Front Cover
(104)
2.2.2
Scanner Block
(321)
2.2.8
A4 LED Array
(329)
2.2.9
Feed Roller
(
302
)
2.2.9
ADF Roller
(
331
)
2.2.8
Toner Sensor
(513)
2.2.18
Bias Transfer Roller
(604)
2.2.19
SNS1 PC Board
(1008)
2.2.16
Rear Chassis
(505) Assy
2.2.16
Feed Roller
(526)
2.2.17
Transfer Guide
(601)
2.2.17
Laser Unit
(512)
2.2.18
SNS3 PC Board
(1009)
2.2.18
Transmit Motor
(324)
2.2.7
Eject Roller
(303)
2.2.6
Stamp Solenoid
(327)
2.2.5
Scanning Glass
(308)
2.2.4
Open Control
Panel Unit
Transmit Guide
(301) Assy
2.2.4
Left Cover
(103)
2.2.2
Right Cover
(102)
2.2.2
Paper Feed Solenoid
(531)
2.2.11
Printer Motor
(626)
2.2.12
Clutch Gear Assy
2.2.11
Paper Feed Roller
(518)
2.2.11
Printer Grease Points
2.2.21
Thermistor Assy
(728)
2.2.14
Recording Paper Tray
Assy (1107)
2.2.1
SNS2 PC Board
(1010)
2.2.20
Printer Cover
(106)
2.2.12
Rear Cover
(105)
2.2.12
SC PC Board
(1001)
2.2.10
ILS PC Board
(1006)
2.2.10
Control Panel Chassis
(201)
2.2.3
PNL1 PC Board
(1005)
2.2.3
MJR PC Board
(1003)
2.2.13
SNS4 PC Board
(1007)
2.2.10
26
2.2.
Disassembly Instructions
2.2.1.
Power Cord (1108), Telephone Line Cable (1109), Recording Paper Tray
Assembly (1107), Paper Cassette
Assembly (1107), Paper Cassette
(1) Disconnect the Power Cord (1108).
(2) Disconnect the Telephone Line Cable (1109).
(2) Disconnect the Telephone Line Cable (1109).
(3) Remove the Recording Paper Tray Assembly
(1107).
(4) Remove the Paper Cassette.
(1)
(2)
(3)
(4)
27
2.2.2.
Left Cover (103), Right Cover (102), Front Cover (104), Speaker (117), Separation
Rubber (207)
Rubber (207)
(1) Open the Printer Cover (106).
(2) Open the Control Panel Unit.
(3) Remove 3 Silver Screws (B1).
(2) Open the Control Panel Unit.
(3) Remove 3 Silver Screws (B1).
(4) Remove the Left Cover (103).
(5) Disconnect Connector CN9 on the SC PC
(5) Disconnect Connector CN9 on the SC PC
Board (1001).
(6) Remove 2 Screws (C2) and 1 Screw (1Y).
(7) Remove the Speaker (117).
(7) Remove the Speaker (117).
<The following steps (8) and (9) are available for
UF-580/780/5100 only>
UF-580/780/5100 only>
(8) Remove 2 Silver Screws (B1).
(9) Remove the SNT Cover (131).
(9) Remove the SNT Cover (131).
(1)
(2)
(3)
(4)
(5)
(6)
(7)
(8)
(9)
28
(10) Remove 2 Silver Screws (B1).
(11) Remove the Right Cover (102).
(12) Release 3 Latch Hooks.
(13) Remove the Front Cover (104).
(13) Remove the Front Cover (104).
<Replacing & Cleaning Separation Rubber>
(1) Open the Control Panel Unit.
(2) Open the Printer Cover (106).
(3) Remove the Separation Rubber Holder Assy
(2) Open the Printer Cover (106).
(3) Remove the Separation Rubber Holder Assy
(202).
(4) Replace with a new Separation Rubber (207).
(5) Clean the Separation Rubber (207) with a soft
(5) Clean the Separation Rubber (207) with a soft
cloth, soaked with isopropyl alcohol.
(10)
(11)
(12)
(13)
(4)
Click on the first or last page to see other UF-580 / UF-590 / UF-780 / UF-790 / UF-5100 / UF-6000 / UF-6100 service manuals if exist.