Panasonic KX-FLB853RU / KX-FA101A / KX-FA102A / KX-FA104E Service Manual ▷ View online
4.3. SCANNING (ADF)
·
DOCUMENT TRANSMISSION (ADF)
The frictional force between ROLLER DOC SEPARATION and RUBBER SEPARATION makes ROLLER DOC PICK UP move
downward from standby position to pick up paper.
downward from standby position to pick up paper.
Pick-upped paper is separated by ROLLER DOC SEPARATION and RUBBER SEPARATION, and then fed by ROLLER DOC
FEED.
FEED.
After being read by CCD, the paper is discharged by ROLLER DOC EJECT.
·
DOCUMENT TRANSMISSION (SCANNER GLASS)
CCD Module is carried by the belt timing along the shaft carriage to the reading start position.
Then it goes back to the home position reading the document through the glass.
41
KX-FLB853RU
4.4. MAINTENANCE
4.4.1. CLEANING THE WHITE PLATE AND GLASSES
Clean the white plate and glasses when a black line, a white line or a dirty pattern appears on:
— your recording paper,
— the original document,
— the data scanned by the computer, or
— the fax document received by the other party.
Caution:
·
Be careful when handling the drum and toner unit.
·
Do not use paper products, such as paper towels or tissues, to clean the inside of the unit.
4.4.1.1. White plate and scanner glasses
1.
Turn the power switch OFF.
2.
Hold the ADF cover (1) firmly and lift it to open the upper part (2) of
the ADF cover, then open the whole of the ADF cover.
the ADF cover, then open the whole of the ADF cover.
3.
Clean the scanner glass (1) and the white cover sheet (2) and its
circumference (3) with a soft and dry cloth.
circumference (3) with a soft and dry cloth.
42
KX-FLB853RU
4.
Close the ADF cover (1), then hold the document cover (2) while
cleaning the white plate (3) and the scanner glass (4).
cleaning the white plate (3) and the scanner glass (4).
5.
Close the document cover (1).
6.
Turn the power switch ON.
If the document cover comes off from the unit
1.
Attach the hinges (1) to the document cover (2).
·
Make sure that the inserted direction is correct. Otherwise, the
hinges cannot be inserted into the slots in step 3.
hinges cannot be inserted into the slots in step 3.
2.
Lay down the hinges (1).
43
KX-FLB853RU
3.
Insert the hinges (1) into the slots (2) on the unit.
4.
Close the document cover.
4.4.1.2. Lower glass
1.
Turn the power switch OFF.
2.
Lift the cover release lever (1) and open the top cover (2).
Important:
·
Close the multi-purpose input tray (3) before opening the
top cover.
top cover.
3.
Remove the drum and toner unit (1) by holding the tabs.
44
KX-FLB853RU
Click on the first or last page to see other KX-FLB853RU / KX-FA101A / KX-FA102A / KX-FA104E service manuals if exist.