Panasonic SC-ZT1EE / SU-ZT1EE / SB-ZT1EE Service Manual / Other ▷ View online
96
Step 4 : Remove 5 screws.
Caution : Fix 5 screws in order during assembling.
Caution : Fix 5 screws in order during assembling.
Caution : Use a minus screwdriver to scrape off the burr around the screw hole before disassembling and assembling of
the Tweeter Base Frame.
97
Step 5 : Gradually remove the Tweeter Base Frame from the Pipe Assembly.
Caution 1 : Gradually insert the wires into the Pipe while the Tweeter Base Frame is being removed.
Caution 1 : Gradually insert the wires into the Pipe while the Tweeter Base Frame is being removed.
Caution 2 : Take extra care not to damage the wires during assembling and removal of the Tweeter Base Frame.
Caution 3 : Take extra care not to damage the antenna during assembling and removal of the Tweeter Base Frame.
Caution 4 : During assembling of the Tweeter Base Frame, insert the Tweeter Base Frame into the Pipe gradually from
the bottom edge.
98
Caution 5 : During assembling, gradually insert the Tweeter Base Frame by using a ball point pen (with the ball point hid-
den) to push at the 4 designated gray areas.
99
Caution 6 : During assembling, after the Tweeter Base Frame inserted into the Pipe, pull out the wires with tweezers.
Caution 7 : During assembling of the Tweeter Base Frame, ensure that the screw holes of the Tweeter Base Frame are
respectively aligned with the screw holes in the interior of the Pipe to allow proper fixation of screws.