Panasonic SC-ZT1EE / SU-ZT1EE / SB-ZT1EE Service Manual / Other ▷ View online
92
Step 3 : Using tweezers, lift up the front part of the Antenna Front Ornament slightly as arrow (1) shown.
Step 4 : Release the 6 catches on the Antenna Front Ornament gradually in order as arrows (2), (3) and (4) shown.
Step 5 : Remove Antenna Front Ornament.
Step 4 : Release the 6 catches on the Antenna Front Ornament gradually in order as arrows (2), (3) and (4) shown.
Step 5 : Remove Antenna Front Ornament.
Caution : Ensure that the catches are properly catched to the Antenna Cover A in order during assembling of the Antenna
Front Ornament.
93
Step 6 : Remove 4 screws.
Step 7 : Peel off the himelon.
Caution : During assembling, replace the himelon if it is torn.
Step 7 : Peel off the himelon.
Caution : During assembling, replace the himelon if it is torn.
Step 8 : Lift up to detach Antenna Cover A from Antenna Cover B.
Caution : Using the 4 catches on Antenna Cover A and the guide on Antenna Cover B, ensure that Antenna Cover A and
Caution : Using the 4 catches on Antenna Cover A and the guide on Antenna Cover B, ensure that Antenna Cover A and
Antenna Cover B are fitted firmly together during assembling.
94
10.5.15. Disassembly of Antenna Wire
• Follow (Step 1) - (Step 14) of item 10.5.1.
• Follow (Step 1) - (Step 2) of item 10.5.12.
• Follow (Step 1) - (Step 4) of item 10.5.13.
• Follow (Step 1) - (Step 2) of item 10.5.14.
• Follow (Step 1) - (Step 2) of item 10.5.12.
• Follow (Step 1) - (Step 4) of item 10.5.13.
• Follow (Step 1) - (Step 2) of item 10.5.14.
Step 1 : Detach the Wire Protector from the Pipe Assembly and remove it from the wires.
Caution : During assembling of the Wire Protector, align the Wire Protector’s guide to the Pipe Assembly’s guide hole and
ensure that the Wire Protector is properly fitted onto the Pipe Assembly.
95
Step 2 : Lift up the Blind Sheets A, B and C, until the Sound Absorber on each side is in sight.
Step 3 : Remove the Sound Absorbers.
Caution : During assembling, replace the Blind Sheet if it is torn.
Step 3 : Remove the Sound Absorbers.
Caution : During assembling, replace the Blind Sheet if it is torn.
Caution : Ensure that all holes are fully covered by the Blind Sheets.
Click on the first or last page to see other SC-ZT1EE / SU-ZT1EE / SB-ZT1EE service manuals if exist.