Panasonic SC-ZT1EE / SU-ZT1EE / SB-ZT1EE Service Manual / Other ▷ View online
88
Step 3 : Cut the 4 wire clampers to remove the Arm.
Caution : During assembling, replace with new wire clampers and ensure that the wire clampers are tightened such that
Caution : During assembling, replace with new wire clampers and ensure that the wire clampers are tightened such that
the wires are firmly located in the Arm.
Step 4 : Remove 2 screws.
Step 5 : Detach Arm Cover B from the Arm.
Step 5 : Detach Arm Cover B from the Arm.
89
10.5.13. Disassembly of Prepared Net Assembly
• Follow the (Step 1) - (Step 14) of item 10.5.1.
• Follow the (Step 1) - (Step 2) of item 10.5.12.
• Follow the (Step 1) - (Step 2) of item 10.5.12.
Step 1 : Remove 1 screw.
Caution: During assembling, do not tighten the screw too tight to avoide the screw hole becomes bigger.
Caution: During assembling, do not tighten the screw too tight to avoide the screw hole becomes bigger.
Step 2 : Remove the Pipe Bottom Cover.
Caution: Replace the himelon if it is torn during disassembling of the Pipe Bottom Cover.
Caution: Replace the himelon if it is torn during disassembling of the Pipe Bottom Cover.
90
Step 3 : With the Prepared Net Assembly facing up, insert a minus screwdriver behind the net frame folded part and apply gentle
force to push out the Prepared Net Assembly as arrows (1) and (2) shown.
Step 4 : Apply gentle force to remove the Prepared Net Assembly completely from the Pipe.
Caution : Take extra care not to tear or damage the Net during removal and assembling of the Prepared Net Assembly.
force to push out the Prepared Net Assembly as arrows (1) and (2) shown.
Step 4 : Apply gentle force to remove the Prepared Net Assembly completely from the Pipe.
Caution : Take extra care not to tear or damage the Net during removal and assembling of the Prepared Net Assembly.
91
10.5.14. Disassembly of Antenna Cover Assembly
• Follow (Step 1) - (Step 14) of item 10.5.1.
• Follow (Step 1) - (Step 2) of item 10.5.12.
• Follow (Step 1) - (Step 4) of item 10.5.13.
• Follow (Step 1) - (Step 2) of item 10.5.12.
• Follow (Step 1) - (Step 4) of item 10.5.13.
Step 1 : Remove 2 screws.
Step 2 : Remove the Antenna Cover Assembly.
Caution : Replace the himelon if it is torn during disaasembling of the Antenna Cover Assembly.
Caution : Replace the himelon if it is torn during disaasembling of the Antenna Cover Assembly.
Click on the first or last page to see other SC-ZT1EE / SU-ZT1EE / SB-ZT1EE service manuals if exist.