Panasonic SC-ZT1EE / SU-ZT1EE / SB-ZT1EE Service Manual / Other ▷ View online
80
10.5.9. Disassembly of Input P.C.B.
• Follow the (Step 1) - (Step 14) of item 10.5.1.
• Follow the (Step 1) - (Step 2) of item 10.5.2.
• Follow the (Step 1) - (Step 4) of item 10.5.4.
• Follow the (Step 1) - (Step 7) of item 10.5.7.
• Follow the (Step 1) - (Step 3) of item 10.5.8.
• Follow the (Step 1) - (Step 2) of item 10.5.2.
• Follow the (Step 1) - (Step 4) of item 10.5.4.
• Follow the (Step 1) - (Step 7) of item 10.5.7.
• Follow the (Step 1) - (Step 3) of item 10.5.8.
Step 1 : Remove 1 screw.
Step 2 : Remove the Sheet Metal.
Step 3 : Remove the Light Panel.
Caution : Using the guide and boss, ensure that the Sheet Metal is properly located onto the Middle Cabinet Assembly
Step 2 : Remove the Sheet Metal.
Step 3 : Remove the Light Panel.
Caution : Using the guide and boss, ensure that the Sheet Metal is properly located onto the Middle Cabinet Assembly
during assembling.
81
Step 4 : Remove 3 screws.
Step 5 : Remove the Power Button.
Step 5 : Remove the Power Button.
82
Caution : Ensure that the Power Button Switch is pushed down to ‘On’ position before fixing the Power Button.
Step 6 : Hold on to the P.C.B. Holder to remove the Input P.C.B. as arrow shown.
Caution 1 : During assembling of the Input P.C.B., ensure that the TEST Terminal Jack is properly slot into the guide hole
Caution 1 : During assembling of the Input P.C.B., ensure that the TEST Terminal Jack is properly slot into the guide hole
in the Middle Cabinet Assembly.
Caution 2 : Ensure that the Input P.C.B. is properly fitted onto the Middle Cabinet Assembly during assembling.
83
10.5.10. Disassembly of Port Assembly (A , B) and Port Assembly (C, D)
• Follow the (Step 1) - (Step 14) of item 10.5.1.
Step 1 : Remove 4 screws.
Step 2 : Remove the wires from the slots in the Middle Cabinet Assembly.
Step 3 : Lift up to remove the Port Assembly.
Caution : Ensure that the wires are placed within the 2 slots in the Middle Cabinet Assembly during assembling of the Port
Step 2 : Remove the wires from the slots in the Middle Cabinet Assembly.
Step 3 : Lift up to remove the Port Assembly.
Caution : Ensure that the wires are placed within the 2 slots in the Middle Cabinet Assembly during assembling of the Port
Assembly.
Click on the first or last page to see other SC-ZT1EE / SU-ZT1EE / SB-ZT1EE service manuals if exist.