Panasonic SC-ZT1EE / SU-ZT1EE / SB-ZT1EE Service Manual / Other ▷ View online
72
Step 2 : Desolder pins of Diode (D5802) on the solder side of SMPS P.C.B.
Step 3 : Remove the Diode (D5802).
73
• Assembly of Diode (D5802)
Step 1 : Apply grease on the heatsink.
Step 2 : Place Diode (D5802) on the SMPS P.C.B. against the heatsink.
Caution : Ensure that Diode (D5802) is firmly fixed onto the heatsink.
Step 2 : Place Diode (D5802) on the SMPS P.C.B. against the heatsink.
Caution : Ensure that Diode (D5802) is firmly fixed onto the heatsink.
74
Step 3 : Solder pins of Diode (D5802) on the solder side of the SMPS P.C.B.
Caution : Ensure that pins of Diode (D5802) are properly located and soldered onto the SMPS P.C.B.
Caution : Ensure that pins of Diode (D5802) are properly located and soldered onto the SMPS P.C.B.
Step 4 : Fix 1 screw.
75
10.5.7. Disassembly of D-Amp P.C.B.
• Follow the (Step 1) - (Step 14) of item 10.5.1.
• Follow the (Step 1) - (Step 2) of item 10.5.2.
• Follow the (Step 1) of item 10.5.4.
• Follow the (Step 1) - (Step 2) of item 10.5.2.
• Follow the (Step 1) of item 10.5.4.
Caution : D-Amp P.C.B. is replaced as a module.
Step 1 : Remove 2 screws.
Step 2 : Remove 1 screw.
Step 3 : Detach 15P FFC at the connector (CNB6501) on the D-Amp P.C.B.
Step 4 : Detach 2P cable at the connector (CNB6004) on the D-Amp P.C.B.
Step 2 : Remove 1 screw.
Step 3 : Detach 15P FFC at the connector (CNB6501) on the D-Amp P.C.B.
Step 4 : Detach 2P cable at the connector (CNB6004) on the D-Amp P.C.B.
Click on the first or last page to see other SC-ZT1EE / SU-ZT1EE / SB-ZT1EE service manuals if exist.