DOWNLOAD Sharp XV-Z91E (serv.man26) Service Manual ↓ Size: 1.01 MB | Pages: 11 in PDF or view online for FREE

Model
XV-Z91E (serv.man26)
Pages
11
Size
1.01 MB
Type
PDF
Document
User Manual / Operation Manual
Brand
Device
Projector / Important information
File
xv-z91e-sm26.pdf
Date

Sharp XV-Z91E (serv.man26) User Manual / Operation Manual ▷ View online

-1
Important
Information
IMPORTANT
Before using the projector, please read this operation manual carefully.
OPERATION MANUAL
ENGLISH
Model No.: XV-Z91E
Serial No.:
ENGLISH
WARNING:
To reduce the risk of fire or electric shock, do not expose this product to rain or moisture.
WARNING:
Intense light source. Do not look into the beam or view it directly. Be especially careful that children do not look
directly into the beam.
CAUTION:
To reduce the risk of electric shock, do not remove cabinet. No user-serviceable parts are inside. Refer servicing
to qualified service personnel.
WARNING:
The cooling fan in this projector continues to run for about 90 seconds after the projector is turned off. During
normal operation, when turning the power off always use the OFF button on the projector or on the remote
control. Ensure the cooling fan has stopped before disconnecting the power cord.
DURING NORMAL OPERATION, NEVER TURN THE PROJECTOR OFF BY DISCONNECTING THE POWER
CORD. FAILURE TO OBSERVE THIS WILL RESULT IN PREMATURE LAMP FAILURE.
-2
Important
Information
LAMP REPLACEMENT 
BEFORE REMOVING THE SCREW, DISCONNECT POWER CORD.
HOT SURFACE INSIDE. ALLOW 1 HOUR TO COOL BEFORE
REPLACING THE LAMP. REPLACE WITH SAME SHARP LAMP
UNIT TYPE BQC-XVZ90+++1 ONLY. UV RADIATION : CAN CAUSE
EYE DAMAGE. TURN OFF LAMP  BEFORE SERVICING.
MEDIUM PRESSURE LAMP : RISK OF EXPLOSION.
POTENTIAL HAZARD OF GLASS  PARTICLES IF LAMP HAS
RUPTURED. HANDLE WITH CARE. SEE  OPERATION MANUAL.
DU REMPLACEMENT DE LA LAMPE.
PRECAUTIONS A OBSERVER LORS
DEBRANCHER LE CORDON D’ALIMENTATION AVANT DE RETIRER LES VIS.
L’INTERIEUR DU BOITIER ETANT EXTREMEMENT CHAUD, ATTENDRE
1 HEURE AVANT DE PROCEDER AU REMPLACEMENT DE LA LAMPE.
NE REMPLACER QUE PAR UNE LAMPE SHARP DE TYPE BQC-XVZ90+++1.
RAYONS ULTRAVIOLETS :  PEUVENT  ENDOMMAGER  LES YEUX.
ETEINDRE LA LAMPE AVANT DE PROCEDER A L’ENTRETIEN. 
LAMPE A MOYENNE PRESSION : RISQUE D’EXPLOSION.
DANGER POTENTIEL  DE  PARTICULES DE VERRE EN CAS D’ECLATEMENT DE LA LAMPE.
A MANIPULER AVEC PRECAUTION, SE REPORTER AU MODE D’EMPLOI.
CAUTION 
Caution Concerning the Lamp Replacement
There is potential glass particles hazard if the lamp ruptures.
WARNING:
Some IC chips in this product include confidential and/or trade secret property belonging to Texas Instruments.
Therefore you may not copy, modify, adapt, translate, distribute, reverse engineer, reverse assemble or discompile
the contents thereof.
ENGLISH
-3
Important
Information
IMPORTANT SAFEGUARDS
ATTENTION: Please read all of these instructions before you operate your Projector for
the first time. Save these instructions for future reference.
For your own protection and prolonged operation of your Projector, be sure to read the following “IMPORTANT
SAFEGUARDS” carefully, before use.
This projector has been engineered and manufactured to ensure your personal safety. But IMPROPER USE CAN
RESULT IN POTENTIAL ELECTRICAL SHOCK OR FIRE HAZARDS. In order not to defeat the safeguards
incorporated into this Projector, observe the following basic rules for its installation, use and servicing.
17. Unplug the Projector equipment from the wall outlet and
refer servicing to qualified service personnel under the
following conditions:
a. When the power cord or plug is damaged or frayed.
b. If liquid has been spilled into the Projector.
c. If the Projector has been exposed to rain or water.
d. If the Projector does not operate normally when
you follow the operating instructions. Adjust only
those controls that are covered by the operating
instructions, as improper adjustment of other
controls may cause damage and will often require
extensive work by a qualified technician to restore
the Projector to normal operation.
e. If the Projector has been dropped or the cabinet
has been damaged.
f.
When the Projector exhibits a distinct change in
performance—this indicates a need for service.
18. When replacement parts are required, be sure the ser-
vice technician has used replacement parts specified by
the manufacturer that have the same characteristics as
the original parts. Unauthorised substitutions may result
in fire, electric shock, or other hazards.
19. This Projector is provided with one of the following types
of plugs. If the plug should fail to fit into the power outlet,
please contact your electrician.
Do not defeat the safety purpose of the plug.
a. Two-wire type mains plug.
b. Three-wire grounding type mains plug with a
grounding terminal.
This plug will only fit into a grounding type power
outlet.
1. Unplug the Projector from the wall outlet before cleaning.
2. Do not use liquid cleaners or aerosol cleaners. Use a
damp cloth for cleaning.
3. Do not use attachments not recommended by the
Projector manufacturer, as they may cause hazards.
4. Do not use the Projector near water; for example, near a
bathtub, washbowl, kitchen sink, laundry tub, in a wet
basement, near a swimming pool, etc. Never spill liquid
into the projector.
5. Do not place the Projector on an unstable cart, stand, or
table. The Projector may fall, which may cause serious
injury to a child or an adult, and/or serious damage to the
unit.
6. Wall or Ceiling Mounting—The product should be
mounted to a wall or ceiling only as recommended by
the manufacturer.
7. Projector equipment and cart
combinations should be moved
with care. Quick stops, excessive
force, and uneven surfaces may
cause the equipment and cart
combination to overturn.
8. Slots and openings in the cabinet back and bottom are
provided for ventilation. To ensure reliable operation of
the Projector and to protect it from overheating, these
openings must not be blocked or covered. The openings
should never be covered with cloth or other material.
9. This Projector should never be placed near or over a
radiator or heating vent. The Projector should not be
placed in a built-in installation such as a bookcase unless
proper ventilation is provided.
10. The Projector should be operated only from the type of
power source indicated on the back of the projector or in
the specifications. If you are not sure of the type of power
supplied to your home, consult your Projector dealer or
local power company.
11. Do not place the Projector where the cord will be abused
by persons walking on it.
12. Follow all warnings and instructions marked on the
Projector.
13. To prevent damage to the projector due to lightning and
power-line surges, unplug the projector from the power
outlet, when not in use.
14. Do not overload wall outlets and extension cords with too
many products, because this can result in fire or electric
shock.
15. Never push objects of any kind into the Projector through
the cabinet slots as they may touch high-voltage points
or cause a short circuit. This could result in a fire or electric
shock.
16. Do not attempt to service the Projector yourself. Opening
or removing covers may expose you to dangerous voltage
or other hazards. Refer all servicing to qualified service
personnel.
-4
Important
Information
IMPORTANT SAFEGUARDS
+35˚C
+5˚C
CAUTION
PRECAUCIÓN
PRÉCAUTION
BQC-XVZ90+++1
Caution Concerning the Lamp Unit
There is a potential hazard of glass particles if the lamp ruptures. In case of
lamp rupture, contact your nearest Sharp Authorised Projector Dealer or
Service Centre for a replacement.
See “Replacing the Lamp” on page 46.
Cautions Concerning the Setup of the Projector
For minimal servicing and to maintain high image quality, SHARP recommends
that this projector be installed in an area free from humidity, dust and cigarette
smoke. When the projector is subjected to these environments, the lens and
part of filter must be cleaned more often than usual. As long as the projector
is properly maintained in this manner, use in these environments will not reduce
the overall operation life. Please note that all internal cleaning must be
performed by a Sharp Authorised Projector Dealer or Service Centre.
• Do not expose the projector to extreme heat or cold.
Operating temperature: +5°C to +35°C
Storage temperature: –20°C to +60°C
Notes on Operation
• The exhaust ventilative hole, the lamp cage cover and adjacent areas may
get extremely hot during projector operation. To prevent injury, do not touch
these areas until they have sufficiently cooled down.
• Allow at least 30 cm of space between the exhaust ventilative hole and the
nearest wall or obstruction.
• If the cooling fan becomes obstructed, a protection device will automatically
turn off the projector lamp. This does not indicate a malfunction. Remove
the projector power cord from the wall outlet and wait at least 10 minutes.
Then turn on the power by plugging the power cord back in. This will return
the projector to the normal operating condition.
This caution is found at the bottom of the projector. See “Caution Concerning the Lamp Replacement”
on page 2 for its location.
LAMP REPLACEMENT 
BEFORE REMOVING THE SCREW, DISCONNECT POWER CORD.
HOT SURFACE INSIDE. ALLOW 1 HOUR TO COOL BEFORE
REPLACING THE LAMP. REPLACE WITH SAME SHARP LAMP
UNIT TYPE BQC-XVZ90+++1 ONLY. UV RADIATION : CAN CAUSE
EYE DAMAGE. TURN OFF LAMP  BEFORE SERVICING.
MEDIUM PRESSURE LAMP : RISK OF EXPLOSION.
POTENTIAL HAZARD OF GLASS  PARTICLES IF LAMP HAS
RUPTURED. HANDLE WITH CARE. SEE  OPERATION MANUAL.
DU REMPLACEMENT DE LA LAMPE.
PRECAUTIONS A OBSERVER LORS
DEBRANCHER LE CORDON D’ALIMENTATION AVANT DE RETIRER LES VIS.
L’INTERIEUR DU BOITIER ETANT EXTREMEMENT CHAUD, ATTENDRE
1 HEURE AVANT DE PROCEDER AU REMPLACEMENT DE LA LAMPE.
NE REMPLACER QUE PAR UNE LAMPE SHARP DE TYPE BQC-XVZ90+++1.
RAYONS ULTRAVIOLETS :  PEUVENT  ENDOMMAGER  LES  YEUX.
ETEINDRE LA LAMPE AVANT DE PROCEDER A L’ENTRETIEN. 
LAMPE A MOYENNE PRESSION : RISQUE D’EXPLOSION.
DANGER POTENTIEL  DE  PARTICULES DE VERRE EN CAS D’ECLATEMENT DE LA LAMPE.
A MANIPULER AVEC PRECAUTION, SE REPORTER AU MODE D’EMPLOI.
CAUTION 
WARNING:
High brightness light source. Do not stare into the beam of light, or view directly. Be especially careful that
children do not stare directly into the beam of light.
Page of 11
Display

Sharp XV-Z91E (serv.man26) User Manual / Operation Manual ▷ Download

  • DOWNLOAD Sharp XV-Z91E (serv.man26) Service Manual ↓ Size: 1.01 MB | Pages: 11 in PDF or view online for FREE
  • Here you can View online or download the User Manual / Operation Manual for the Sharp XV-Z91E (serv.man26) in PDF for free, which will help you to disassemble, recover, fix and repair Sharp XV-Z91E (serv.man26) Projector. Information contained in Sharp XV-Z91E (serv.man26) User Manual / Operation Manual (repair manual) includes:
  • Disassembly, troubleshooting, maintenance, adjustment, installation and setup instructions.
  • Schematics, Circuit, Wiring and Block diagrams.
  • Printed wiring boards (PWB) and printed circuit boards (PCB).
  • Exploded View and Parts List.