Panasonic SC-NA30GN / SC-NA30P / SC-NA30PC Service Manual ▷ View online
29
9.13. Disassembly of Mic Unit
• Refer to “Disassembly of Rear Cabinet Block”
• Refer to “Disassembly of Battery Pack”
• Refer to “Disassembly of Main P.C.B.”
• Refer to “Disassembly of Battery Pack”
• Refer to “Disassembly of Main P.C.B.”
Step 1 : Remove 1 screw.
Step 2 : Remove the Mic Holder.
Step 3 : Remove the Mic Unit.
Caution : During assembling, dressed the 2P wire into the
slot.
Step 2 : Remove the Mic Holder.
Step 3 : Remove the Mic Unit.
Caution : During assembling, dressed the 2P wire into the
slot.
9.14. Disassembly of Top Ornament
Block
• Refer to “Disassembly of Rear Cabinet Block”
Step 1 : Remove 2 screws.
Step 2 : Slightly lift up the Top Ornament Block.
Step 2 : Slightly lift up the Top Ornament Block.
Step 3 : Detach 8P FFC at connector (P1003) on the Main
P.C.B..
Step 4 : Remove the Top Ornament Block.
P.C.B..
Step 4 : Remove the Top Ornament Block.
30
9.15. Replacement of Top Ornament
• Refer to “Disassembly of Top Ornament Block”
9.15.1.
Disassembly of Top Ornament
Step 1 : Release 2 catches.
Step 2 : Remove the Top Ornament.
9.15.2.
Assembly of Top Ornament
Step 1 : Slide the Guide Plate to the right until it come to a stop.
Step 2 : Ensure the Guide Arm is in left position as shown.
Step 2 : Ensure the Guide Arm is in left position as shown.
Step 3 : Align the Top Ornament into the Bottom Case Assem-
bly with the Volume Knob, Treble Knob and Bass Knob.
Step 4 : Push down the Top Ornament to fix it.
Caution : Ensure a “Tick” sound is heard when the Top
Ornament is fully catched.
bly with the Volume Knob, Treble Knob and Bass Knob.
Step 4 : Push down the Top Ornament to fix it.
Caution : Ensure a “Tick” sound is heard when the Top
Ornament is fully catched.
31
Caution 1 : Slide the Guide Plate to the Left and then to the
Right to check that the Top Ornament fixed in properly.
Caution 2 : During assembling, ensure that the Top Orna-
ment in open condition before fix to the Rear Cabinet
Assembly.
Right to check that the Top Ornament fixed in properly.
Caution 2 : During assembling, ensure that the Top Orna-
ment in open condition before fix to the Rear Cabinet
Assembly.
9.16. Disassembly of Volume P.C.B.
• Refer to “Disassembly of Top Ornament Block”
• Refer to “Disassembly of Top Ornament”
• Refer to “Disassembly of Top Ornament”
Step 1 : Remove the Volume Knob, Treble Knob and Bass
Knob.
Knob.
Step 2 : Remove 1 screw.
32
Step 3 : Release 4 catches.
Caution : During assembling, ensure the Volume Holder is
fully catched and properly seated on the locator.
Caution : During assembling, ensure the Volume Holder is
fully catched and properly seated on the locator.
Step 4 : Remove the Volume Holder.
Step 5 : Detach 5P wire at connector (P1923) on the Volume
P.C.B..
Step 5 : Detach 5P wire at connector (P1923) on the Volume
P.C.B..
Step 6 : Remove the Volume P.C.B..
Caution : During assembling, ensure the Volume P.C.B. is
properly seated on the locator.
properly seated on the locator.
Click on the first or last page to see other SC-NA30GN / SC-NA30P / SC-NA30PC service manuals if exist.