Panasonic SC-NA30GN / SC-NA30P / SC-NA30PC Service Manual ▷ View online
17
9.1.
Disassembly flow chart
The following chart is the procedure for disassembling the casing and inside parts for internal inspection when carrying out the ser-
vicing.
To assemble the unit, reverse the steps shown in the chart below.
vicing.
To assemble the unit, reverse the steps shown in the chart below.
9.2.
Types of Screws
18
9.3.
Main Parts Location Diagram
19
9.4.
Disassembly of Rear Cabinet
Block
Block
Step 1 : Remove 2 Foot Rubbers.
Caution : Replace the Foot Rubbers if they are torn during
disassembling.
Caution : Replace the Foot Rubbers if they are torn during
disassembling.
Step 2 : Remove 4 Screw Ornaments.
Caution : Replace the Screw Ornaments if they are torn
during disassembling.
Caution : Replace the Screw Ornaments if they are torn
during disassembling.
Step 3 : Remove 6 Screws.
20
Step 4 : Slightly lift up the Rear Cabinet Block.
Step 5 : Remove the Rear Cabinet Block.
9.5.
Disassembly of Passive Radia-
tor Unit (SP4) & (SP5)
tor Unit (SP4) & (SP5)
Picture shows the location of the Passive Radiator Unit (SP4) &
(SP5).
(SP5).
Note : The disassembling procedure for Passive Radiator Unit
(SP4) will be described only.
For Passive Radiator Unit (SP5) please refer to the same pro-
cedure described here.
(SP4) will be described only.
For Passive Radiator Unit (SP5) please refer to the same pro-
cedure described here.
• Refer to “Disassembly of Rear Cabinet Block”
Step 1 : Remove 4 screws.
Click on the first or last page to see other SC-NA30GN / SC-NA30P / SC-NA30PC service manuals if exist.