Panasonic SC-NA30GN / SC-NA30P / SC-NA30PC Service Manual ▷ View online
9
5 General/Introduction
5.1.
About the power of this unit
5.2.
About the DC OUT terminal (USB)
10
5.3.
One-Touch Connection (Connecting by NFC)
11
6 Location of Controls and Components
6.1.
Main Unit Key Button Operations
12
7 Service Mode
This unit is equipped with features of service mode & doctor mode setting for checking the functions & reliability.
7.1.
Service Mode
Here is the procedures to enter into Service Mode.
Step 1 : Turn on the unit.
Step 2 : Press and hold [BT]
Step 1 : Turn on the unit.
Step 2 : Press and hold [BT]
→ [BT + POWER] → [BT + POWER + VOL+] on the unit.
Step 3 : LP LED start blinking with 250ms (Refer to Figure 7-1).
To exit the Service Mode
• Press the power button on the main unit.
7.1.1.
Service Mode Table
Mode Description
LED Indicators
Panel Key
SELECTOR
LP
OTHER
SETTING
VOLUME
SETTING
LED 1
(Battery)
LED 2
(BT)
LED 3
(LP)
Volume Up
(clockwise
rotation)
(clockwise
rotation)
Software
Version
Version
No
Change
No
Change
No
Change
-
Exit Service Mode and Power Off
Exit Service
mode and
power OFF
mode and
power OFF
Link Status
“O” means LED on
“X” means LED off
“*” means LED blink 125ms
“O” means LED on
“X” means LED off
“*” means LED blink 125ms
Key
Buttons
Mode
Name
(Refer to Table 7-1)
Firmware version
BT
POWER
BT
Version
Version
No
Change
No
Change
No
Change
-
(Refer to Table 7-1)
BT version
Exit Service Mode
and clear all setting
without total Running
Time, Error History
and clear all setting
without total Running
Time, Error History
Click on the first or last page to see other SC-NA30GN / SC-NA30P / SC-NA30PC service manuals if exist.