Panasonic SC-NA30GN / SC-NA30P / SC-NA30PC Service Manual ▷ View online
21
Step 2 : Remove the Passive Radiator Unit (SP4).
9.6.
Disassembly of Jack P.C.B.
• Refer to “Disassembly of Rear Cabinet Block”
Step 1 : Lift up the 6P FFC & 17P FFC from the Slot.
Caution : During assembling, ensure that the 6P FFC & 17P
FFC is properly seated into the slots.
Caution : During assembling, ensure that the 6P FFC & 17P
FFC is properly seated into the slots.
Step 2 : Lift up the Jack P.C.B..
22
Step 3 : Detach 17P FFC at connector (P1902) on the Jack
P.C.B..
Step 4 : Detach 6P FFC at connector (P1901) on the Jack
P.C.B..
Step 5 : Remove the Jack P.C.B..
P.C.B..
Step 4 : Detach 6P FFC at connector (P1901) on the Jack
P.C.B..
Step 5 : Remove the Jack P.C.B..
Caution : During assembling, insert the Jack P.C.B. into the
ribs of the Front Cabinet Unit.
ribs of the Front Cabinet Unit.
9.7.
Disassembly of NFC P.C.B.
• Refer to “Disassembly of Rear Cabinet Block”
Step 1 : Lift up the 11P FFC from the Slot.
Caution : During assembling, ensure that the 11P FFC is
properly seated into the slot.
Caution : During assembling, ensure that the 11P FFC is
properly seated into the slot.
Step 2 : Lift up the NFC P.C.B..
23
Step 3 : Detach 11P FFC at connector (P1301) on the NFC
P.C.B..
Step 4 : Remove the NFC P.C.B..
P.C.B..
Step 4 : Remove the NFC P.C.B..
Caution : During assembling, inserted the NFC P.C.B. into
the ribs of the Front Cabinet Unit.
the ribs of the Front Cabinet Unit.
9.8.
Disassembly of Bluetooth Mod-
ule
ule
• Refer to “Disassembly of Rear Cabinet Block”
Step 1 : Remove 1 screw.
Step 2 : Detach 16P FFC at connector (CN1701) on the Blue-
tooth Module.
Step 2 : Detach 16P FFC at connector (CN1701) on the Blue-
tooth Module.
Step 3 : Remove the Bluetooth Module.
24
Caution : During assembling, ensure that the Bluetooth
Module is properly seated into the locator.
Module is properly seated into the locator.
9.9.
Disassembly of Battery Pack
• Refer to “Disassembly of Rear Cabinet Block”
Step 1 : Remove 2 screws.
Step 2 : Slightly lift up the Battery Pack.
Step 2 : Slightly lift up the Battery Pack.
Step 3 : Remove the Battery Holder (L) and Battery Holder (R).
Step 4 : Detach 6P cable at connector (P1802) on the Main
P.C.B..
Step 4 : Detach 6P cable at connector (P1802) on the Main
P.C.B..
Click on the first or last page to see other SC-NA30GN / SC-NA30P / SC-NA30PC service manuals if exist.