Panasonic SC-NA30GN / SC-NA30P / SC-NA30PC Service Manual ▷ View online
25
Step 5 : Remove the Battery Pack.
Caution 1 : During assembling, ensure that the Battery
Holder (L) & Battery Holder (R) is properly fix into the Bat-
tery Pack.
Caution 2 : During assembling, dressed the 6P wire as Pic-
ture shown.
Holder (L) & Battery Holder (R) is properly fix into the Bat-
tery Pack.
Caution 2 : During assembling, dressed the 6P wire as Pic-
ture shown.
9.10. Disassembly of Main P.C.B.
• Refer to “Disassembly of Rear Cabinet Block”
• Refer to “Disassembly of Battery Pack”
• Refer to “Disassembly of Battery Pack”
Step 1 : Detach 2P cable at connector (P1403) on the Main
P.C.B..
Step 2 : Detach 11P FFC at connector (P1005) on the Main
P.C.B..
Step 3 : Detach 16P FFC at connector (P1006) on the Main
P.C.B..
Step 4 : Detach 2P cable at connector (P1501) on the Main
P.C.B..
Step 5 : Detach 2P cable at connector (P1401) on the Main
P.C.B..
Step 6 : Detach 2P cable at connector (P1402) on the Main
P.C.B..
Step 7 : Detach 17P FFC at connector (P1801) on the Main
P.C.B..
Step 8 : Detach 6P FFC at connector (P1811) on the Main
P.C.B..
P.C.B..
Step 2 : Detach 11P FFC at connector (P1005) on the Main
P.C.B..
Step 3 : Detach 16P FFC at connector (P1006) on the Main
P.C.B..
Step 4 : Detach 2P cable at connector (P1501) on the Main
P.C.B..
Step 5 : Detach 2P cable at connector (P1401) on the Main
P.C.B..
Step 6 : Detach 2P cable at connector (P1402) on the Main
P.C.B..
Step 7 : Detach 17P FFC at connector (P1801) on the Main
P.C.B..
Step 8 : Detach 6P FFC at connector (P1811) on the Main
P.C.B..
26
Step 9 : Remove 4 screws.
Step 10 : Slightly lift up the Main P.C.B..
Step 10 : Slightly lift up the Main P.C.B..
Step 11 : Detach 8P FFC at connector (P1003) on the Main
P.C.B..
Step 12 : Remove the Main P.C.B..
P.C.B..
Step 12 : Remove the Main P.C.B..
Caution : During assembling, ensure that the Main P.C.B. is
properly seated into the locator.
properly seated into the locator.
27
9.11. Disassembly of Woofer
Speaker (SP3)
• Refer to “Disassembly of Rear Cabinet Block”
• Refer to “Disassembly of Battery Pack”
• Refer to “Disassembly of Main P.C.B.”
• Refer to “Disassembly of Battery Pack”
• Refer to “Disassembly of Main P.C.B.”
Step 1 : Remove 4 screws.
Step 2 : Remove the Woofer Speaker (SP3).
Caution : During assembling, ensure that the Woofer
Speaker Terminal is facing the Top Ornament Block.
Speaker Terminal is facing the Top Ornament Block.
28
9.12. Disassembly of Tweeter
Speaker (SP1) & (SP2)
Picture shows the location of the Tweeter Speaker (SP1) &
(SP2).
(SP2).
Note : The disassembling procedure for Tweeter Speaker
(SP1) will be described only.
For Tweeter Speaker (SP2) please refer to the same procedure
described here.
(SP1) will be described only.
For Tweeter Speaker (SP2) please refer to the same procedure
described here.
• Refer to “Disassembly of Rear Cabinet Block”
• Refer to “Disassembly of Battery Pack”
• Refer to “Disassembly of Main P.C.B.”
• Refer to “Disassembly of Battery Pack”
• Refer to “Disassembly of Main P.C.B.”
Step 1 : Remove 4 screws.
Step 2 : Remove the Tweeter Speaker (SP1).
Caution : During assembling, ensure that the Tweeter
Speaker Terminal are fixed as shown below.
Speaker Terminal are fixed as shown below.
Click on the first or last page to see other SC-NA30GN / SC-NA30P / SC-NA30PC service manuals if exist.