Panasonic SC-NA10EB / SC-NA10EG / SC-NA10GN / SC-NA10P / SC-NA10PC Service Manual ▷ View online
29
9.11. Disassembly of Main P.C.B.
• Refer to “Disassembly of Rear Cabinet Assembly”
Step 1 : Remove 2 screws.
Step 2 : Detach 9P wire at connector (P1004) on the Main
P.C.B..
Step 3 : Detach 9P FFC at connector (P1005) on the Main
P.C.B..
Step 4 : Detach 16P FFC at connector (P1006) on the Main
P.C.B..
Step 5 : Detach 15P wire at connector (P1801) on the Main
P.C.B..
Step 6 : Detach 2P wire at connector (P1501) on the Main
P.C.B..
P.C.B..
Step 3 : Detach 9P FFC at connector (P1005) on the Main
P.C.B..
Step 4 : Detach 16P FFC at connector (P1006) on the Main
P.C.B..
Step 5 : Detach 15P wire at connector (P1801) on the Main
P.C.B..
Step 6 : Detach 2P wire at connector (P1501) on the Main
P.C.B..
Step 7 : Detach 2P wire at connector (P1402) on the Main
P.C.B..
Step 8 : Detach 6P wire at connector (P1802) on the Main
P.C.B..
Step 9 : Detach 2P wire at connector (P1401) on the Main
P.C.B..
P.C.B..
Step 8 : Detach 6P wire at connector (P1802) on the Main
P.C.B..
Step 9 : Detach 2P wire at connector (P1401) on the Main
P.C.B..
Step 10 : Remove the Main P.C.B..
Caution : During assembling, ensure that the Volume
P.C.B. is properly seated into the locators.
P.C.B. is properly seated into the locators.
30
9.12. Disassembly of Battery Pack
• Refer to “Disassembly of Rear Cabinet Assembly”
• Refer to “Disassembly of Main P.C.B.”
• Refer to “Disassembly of Main P.C.B.”
Step 1 : Remove 3 screws.
Step 2 : Remove the Chassis Assembly.
Caution : During assembling, ensure that the Battery Pack
Unit is properly seated into the locators.
Unit is properly seated into the locators.
Step 3 : Remove the Battery Pack.
Caution : Replace the Battery Spacers if they are torn.
Caution : Replace the Battery Spacers if they are torn.
31
9.13. Disassembly of Passive Radia-
tor Unit
• Refer to “Disassembly of Rear Cabinet Assembly”
• Refer to “Disassembly of Main P.C.B.”
• Refer to (Step 1) - (Step 2) of item 9.12
• Refer to “Disassembly of Main P.C.B.”
• Refer to (Step 1) - (Step 2) of item 9.12
Step 1 : Remove 2 screws.
Step 2 : Remove the Passive Radiator Unit.
Caution : During assembling, ensure that the marking of
Passive Radiator Unit is facing to the top of the Front Cab-
inet Unit.
Caution : During assembling, ensure that the marking of
Passive Radiator Unit is facing to the top of the Front Cab-
inet Unit.
9.14. Disassembly of Front Speaker
Unit (L) & (R)
Picture shows the location of the Front Speaker Unit (L) & (R).
Note : The disassembling procedure for Front Speaker Unit (L)
will be described only.
For Front Speaker Unit (R) please refer to the same procedure
described here.
will be described only.
For Front Speaker Unit (R) please refer to the same procedure
described here.
• Refer to “Disassembly of Rear Cabinet Assembly”
• Refer to “Disassembly of Main P.C.B.”
• Refer to (Step 1) - (Step 2) of item 9.12
• Refer to “Disassembly of Main P.C.B.”
• Refer to (Step 1) - (Step 2) of item 9.12
Step 1 : Lift up and release the 15P Wire from the slots.
32
Step 2 : Remove 2 screws.
Step 3 : Remove the Front Speaker Unit (L).
Step 4 : Remove the Cushion Sheet B.
Step 5 : Desolder the speaker wires.
Step 6 : Remove the Front Speaker Unit (L).
Caution : During assembling, ensure that the Speaker
Wires are bend as below shown before solder.
Step 5 : Desolder the speaker wires.
Step 6 : Remove the Front Speaker Unit (L).
Caution : During assembling, ensure that the Speaker
Wires are bend as below shown before solder.
Click on the first or last page to see other SC-NA10EB / SC-NA10EG / SC-NA10GN / SC-NA10P / SC-NA10PC service manuals if exist.