Sharp SD-CX1 (serv.man2) User Manual / Operation Manual ▷ View online
– 1 –
Web-site: www.sharp.co.uk/support Help Line: 08705 274277 (office hours)
This Quick Guide will help you to correctly
install and operate your system.
install and operate your system.
SD-CX1H
1-BIT DIGITAL AUDIO SYSTEM
If you require any advice or assistance re-
garding your Sharp product, please visit
our web-site www.sharp.co.uk/support.
Customers without internet access may
telephone 08705 274277 during office
hours (or (01) 676 0648 if telephoning from
Ireland).
garding your Sharp product, please visit
our web-site www.sharp.co.uk/support.
Customers without internet access may
telephone 08705 274277 during office
hours (or (01) 676 0648 if telephoning from
Ireland).
Accessories
Non-slip sheet
for speakers
×
8
“AA” size battery
(UM/SUM-3, R6, HP-7 or similar)
×
2
Remote control
×
1
FM aerial
×
1
Speaker wire
×
2
1
2
3
Battery installation of remote control
Use 2 “AA” size batteries (UM/SUM-3, R6, HP-7 or similar).
Open the
Insert the batteries
Close the
battery cover.
as shown.
battery cover.
1
1
2
2
TINSE0353AWZZ
A0012.YT
AM loop aerial
×
1
AC power lead
×
1
– 3 –
Web-site: www.sharp.co.uk/support Help Line: 08705 274277 (office hours)
– 2 –
Web-site: www.sharp.co.uk/support Help Line: 0990 274277 (office hours)
System Connections
3
3
Wall socket
(AC 230V, 50 Hz)
(AC 230V, 50 Hz)
FM aerial
Left speaker
Right speaker
To the line
output sockets
output sockets
RCA lead
(Not supplied)
(Not supplied)
VCR, DVD, etc.
TV
Left speaker
Clear
Black line
Right speaker
AM loop aerial
Adhere the non-slip
sheets to the bottom
of the speaker.
sheets to the bottom
of the speaker.
Adhere the non-slip sheets on
the lower back of the speaker,
and then mount it to the wall.
the lower back of the speaker,
and then mount it to the wall.
How to apply non-slip sheet
– 5 –
Web-site: www.sharp.co.uk/support Help Line: 08705 274277 (office hours)
– 4 –
Web-site: www.sharp.co.uk/support Help Line: 0990 274277 (office hours)
Listening to a MiniDisc
1
Press the CD
H
H
H
H
H
button.
2
Press the CD
7
7
7
7
7
button to open the CD cover.
3
Set the CD and press the CD
7
7
7
7
7
button.
4
Press the CD
06
06
06
06
06
button to start playback.
Listening to a CD
Total number of tracks
Turn on your System
The first time the unit is plugged in,
the unit will enter the demonstration
mode. You will see words scroll.
the unit will enter the demonstration
mode. You will see words scroll.
2
1
Press the AUX (DEMO)
button to cancel the
demonstration mode.
button to cancel the
demonstration mode.
Press the ON/STAND-
BY button to turn the
power on.
BY button to turn the
power on.
4
4
Total playing time
Disc name
Total number of
tracks
Total playing time
1
Open the control panel cover.
Control panel cover
2
Press the MD
H
H
H
H
H
button.
3
Load a MiniDisc into the MD compartment, label side up.
4
Press the MD
06
06
06
06
06
button to start playback.
Label side facing you.
Label side up.
– 6 –
Web-site: www.sharp.co.uk/support Help Line: 0990 274277 (office hours)
■
If trouble occurs (reset)
If such a problem occurs, do the following:
Unplug the power lead from the AC socket. Then, plug it in again and retry the operation.
Unplug the power lead from the AC socket. Then, plug it in again and retry the operation.
■
Before transporting the unit
Remove the CD and MD from the unit. Your unit
checks whether there are any discs inside. "CD
NO DISC" and "MD NO DISC" appear if no disc is
inside. Then, set the unit to the power stand-by
mode. Carrying the unit with discs left inside can
damage it.
checks whether there are any discs inside. "CD
NO DISC" and "MD NO DISC" appear if no disc is
inside. Then, set the unit to the power stand-by
mode. Carrying the unit with discs left inside can
damage it.
1
Press the TUNER (BAND) button repeatedly to select the desired frequency
band (FM STEREO, FM or AM).
band (FM STEREO, FM or AM).
2
Press the TUNING (
X
X
X
X
X
or
W
W
W
W
W
) button to tune in to the desired station.
●
When the TUNING (
X
or
W
) button is pressed for more than 0.5 seconds, scanning will
start automatically and the tuner will stop at the first receivable broadcast station.
3
To receive an FM stereo transmission, press the TUNER (BAND) button.
The “STEREO” indicator lights up.
The “STEREO” indicator lights up.
●
“ST” will appear when an FM broadcast is in stereo.
Listening to the Radio
Display
