Panasonic SC-NA10EB / SC-NA10EG / SC-NA10GN / SC-NA10P / SC-NA10PC Service Manual ▷ View online
17
7.3.
Version Display Mapping
Table 7-1
Remarks
Version
POWER
Bit 2
Bit 1
Bit 0
X
X
X
BT
LP
-
Link Status
“O” means LED on
“X” means LED off
“*” means LED blink 250ms
“O” means LED on
“X” means LED off
“*” means LED blink 250ms
No use in this blank pattern
X
X
O
01,08,15,22,,,,,71,78,85,92,99…
02,09,16,23,,,,,72,79,86,93,100…
X
O
X
X
O
O
03,10,17,24,,,,73,80,87,94,101...
O
X
X
04,11,18,25,,,,,74,81,88,95,102…
05,12,19,26,,,,,75,82,89,96,103…
O
X
O
O
O
X
06,13,20,27,,,,,76,83,90,97,104…
O
O
O
07,14,21,28,,,,,77,84,91,98,105…
18
8 Troubleshooting Guide
This section is not available at the time of issue
19
9 Disassembly and Assembly Instructions
Caution Note:
• This section describes the disassembly and/or assembly procedures for all major printed circuit boards & main compo-
nents for the unit. (You may refer to the section of “Main components and P.C.B Locations” as described in the service
manual)
manual)
• Before carrying out the disassembly process, please ensure all the safety precautions & procedures are followed.
• During the disassembly and/or assembly process, please handle with care as there may be chassis components with
• During the disassembly and/or assembly process, please handle with care as there may be chassis components with
sharp edges.
• Avoid touching heatsinks due to its high temperature after prolong use. (See caution as described below)
• During disassembly and assembly, please ensure proper service tools, equipments or jigs is being used.
• During replacement of component parts, please refer to the section of “Replacement Parts List” as described in the ser-
• During replacement of component parts, please refer to the section of “Replacement Parts List” as described in the ser-
vice manual.
• Select items from the following indexes when disassembly or replacement are required.
• Disassembly of Rear Cabinet Assembly
• Disassembly of Jack P.C.B.
• Disassembly of Bluetooth P.C.B.
• Disassembly of NFC P.C.B.
• Disassembly of Button P.C.B.
• Disassembly of Volume P.C.B.
• Disassembly of Microphone Unit
• Disassembly of Main P.C.B.
• Disassembly of Battery Pack
• Disassembly of Passive Radiator Unit
• Disassembly of Front Speaker Unit (L) & (R)
• Disassembly of Jack P.C.B.
• Disassembly of Bluetooth P.C.B.
• Disassembly of NFC P.C.B.
• Disassembly of Button P.C.B.
• Disassembly of Volume P.C.B.
• Disassembly of Microphone Unit
• Disassembly of Main P.C.B.
• Disassembly of Battery Pack
• Disassembly of Passive Radiator Unit
• Disassembly of Front Speaker Unit (L) & (R)
20
9.1.
Disassembly flow chart
The following chart is the procedure for disassembling the casing and inside parts for internal inspection when carrying out the ser-
vicing.
To assemble the unit, reverse the steps shown in the chart below.
vicing.
To assemble the unit, reverse the steps shown in the chart below.
9.2.
Types of Screws
Click on the first or last page to see other SC-NA10EB / SC-NA10EG / SC-NA10GN / SC-NA10P / SC-NA10PC service manuals if exist.