Panasonic SC-NA10EB / SC-NA10EG / SC-NA10GN / SC-NA10P / SC-NA10PC Service Manual ▷ View online
13
5.5.
One-Touch Connection (Connecting by NFC)
14
6 Location of Controls and Components
6.1.
Main Unit Key Button Operations
15
7 Service Mode
This unit is equipped with features of service mode & doctor mode setting for checking the functions & reliability.
7.1.
Service Mode
Here is the procedures to enter into Service Mode.
Step 1 : Turn on the unit.
Step 2 : Press and hold [BT]
Step 1 : Turn on the unit.
Step 2 : Press and hold [BT]
→ [BT + POWER] → [BT + POWER + VOL+] on the unit.
Step 3 : LP LED start blinking with 250ms (Refer to Figure 7-1).
To exit the Service Mode
• Press the power button on the main unit.
7.1.1.
Service Mode Table
Mode Description
LED Indicators
Panel Key
SELECTOR
LP
OTHER
SETTING
VOLUME
SETTING
LED 1
(Battery)
LED 2
(BT)
LED 3
(LP)
Volume Up
(clockwise
rotation)
(clockwise
rotation)
Software
Version
Version
No
Change
No
Change
No
Change
-
Exit Service Mode and Power Off
Exit Service
mode and
power OFF
mode and
power OFF
Link Status
“O” means LED on
“X” means LED off
“*” means LED blink 125ms
“O” means LED on
“X” means LED off
“*” means LED blink 125ms
Key
Buttons
Mode
Name
(Refer to Table 7-1)
Firmware version
BT
POWER
BT
Version
Version
No
Change
No
Change
No
Change
-
(Refer to Table 7-1)
BT version
Exit Service Mode
and clear all setting
without total Running
Time, Error History
and clear all setting
without total Running
Time, Error History
16
7.2.
Doctor Mode
Here is the procedures to enter into Doctor Mode.
Step 1 : Turn on the unit.
Step 2 : Press and hold [LP]
Step 1 : Turn on the unit.
Step 2 : Press and hold [LP]
→ [LP + POWER] → [LP + POWER + VOL+] on the unit.
Step 3 : LP LED start blinking with 250ms (Refer to Figure 7-2).
To exit the Doctor Mode
• Press the power button on the main unit.
7.2.1.
Doctor Mode Table
Mode Description
LED Indicators
Panel Key
SELECTOR
LP
OTHER
SETTING
VOLUME
SETTING
LED 1
(Battery)
LED 2
(BT)
LED 3
(LP)
LP
B.B.D
check
Mode
check
Mode
No
Change
OFF
(Default)
VOL 10
-
O
-
Blink
Once
-
depends
on BT
codec
codec
(Default)
Exit Doctor Mode and Power Off
Exit Doctor
mode and
power OFF
mode and
power OFF
Link Status
“O” means LED on
“X” means LED off
“*” means LED blink 125ms
“O” means LED on
“X” means LED off
“*” means LED blink 125ms
Key
Buttons
Mode
Name
LP mode = OFF
Volume Up
(clockwise
rotation)
(clockwise
rotation)
Software
Version
Version
No
Change
No
Change
No
Change
-
(Refer to Table 7-1)
Firmware version
-
Volume Down
(anticlockwise
rotation)
(anticlockwise
rotation)
Key LED
Check
Check
No
Change
No
Change
No
Change
9ROXPH8S3RZHUĺ
/3/3OHGĺ%7%7OHG
ĺSRZHU(1'
/3/3OHGĺ%7%7OHG
ĺSRZHU(1'
press and
hold [BT]
for 2sec
hold [BT]
for 2sec
NFC Lock
Release
(NFC_INIT)
Release
(NFC_INIT)
No
Change
No
Change
No
Change
-
Opecon send "INIT"
command to NFC_IC_CHIP
command to NFC_IC_CHIP
No
Operation
(Default)
POWER
BT
connection
codec
check
connection
codec
check
BT
No
Change
No
Change
(Default)
BT LED lights up or blinks
like following:
- BT connected
via aptX: on
- BT connected
via SBC: blink
(100msOn/100msOff)
like following:
- BT connected
via aptX: on
- BT connected
via SBC: blink
(100msOn/100msOff)
Clear all setting and memory
Click on the first or last page to see other SC-NA10EB / SC-NA10EG / SC-NA10GN / SC-NA10P / SC-NA10PC service manuals if exist.