Panasonic SC-NA10EB / SC-NA10EG / SC-NA10GN / SC-NA10P / SC-NA10PC Service Manual ▷ View online
25
9.7.
Disassembly of NFC P.C.B.
• Refer to “Disassembly of Rear Cabinet Assembly”
Step 1 : Detach 9P FFC at connector (P1005) on the Main
P.C.B..
P.C.B..
Step 2 : Lift up the NFC P.C.B. from the slot and remove the
NFC P.C.B..
NFC P.C.B..
Caution : During assembling, ensure that the NFC P.C.B. is
inserted properly and seated into the slot of the Front Cab-
inet Unit.
inserted properly and seated into the slot of the Front Cab-
inet Unit.
26
9.8.
Disassembly of Button P.C.B.
• Refer to “Disassembly of Rear Cabinet Assembly”
Step 1 : Remove the 2P wire and 9P wire from the slots of the
Front Cabinet Unit.
Front Cabinet Unit.
Step 2 : Detach 2P wire at connector (P1922) on the Button
P.C.B..
Step 3 : Detach 9P wire at connector (P1921) on the Button
P.C.B..
P.C.B..
Step 3 : Detach 9P wire at connector (P1921) on the Button
P.C.B..
Step 4 : Remove the Button P.C.B..
Caution : During assembling, ensure that the Button P.C.B.
is properly seated into the guide of the Power Button.
is properly seated into the guide of the Power Button.
27
9.9.
Disassembly of Volume P.C.B.
• Refer to “Disassembly of Rear Cabinet Assembly”
Step 1 : Detach 2P wire at connector (P1922) on the Button
P.C.B..
P.C.B..
Step 2 : Remove 1 screw.
Step 3 : Remove the Volume Knob.
Step 3 : Remove the Volume Knob.
Step 4 : Tilt the Volume Ornament slightly to release the guide
as arrow shown in order of sequences (1) to (2).
Step 5 : Remove the Volume Ornament.
as arrow shown in order of sequences (1) to (2).
Step 5 : Remove the Volume Ornament.
Step 6 : Remove the Volume P.C.B..
Caution : During assembling, ensure that the Volume
P.C.B. is properly inserted into the slots of the Front Cabi-
net Unit.
P.C.B. is properly inserted into the slots of the Front Cabi-
net Unit.
28
9.10. Disassembly of Microphone
Unit
• Refer to “Disassembly of Rear Cabinet Assembly”
Step 1 : Remove 1 screw.
Step 2 : Detach 15P FFC at connector (P1801) on the Main
P.C.B..
Step 3 : Lift up and release the 15P Wire from the slot.
Caution : During assembling, ensure that the 15P wire is
properly seated into the slot.
Step 2 : Detach 15P FFC at connector (P1801) on the Main
P.C.B..
Step 3 : Lift up and release the 15P Wire from the slot.
Caution : During assembling, ensure that the 15P wire is
properly seated into the slot.
Step 4 : Remove the Mic Holder.
Step 5 : Detach 2P wire at connector (P1501) on the Main
P.C.B..
Step 6 : Lift up and release the 2P Wire from the slot.
Step 5 : Detach 2P wire at connector (P1501) on the Main
P.C.B..
Step 6 : Lift up and release the 2P Wire from the slot.
Step 7 : Remove the Microphone Unit.
Click on the first or last page to see other SC-NA10EB / SC-NA10EG / SC-NA10GN / SC-NA10P / SC-NA10PC service manuals if exist.