Panasonic SA-PMX5EG / SC-PMX5EE-S Service Manual ▷ View online
21
8.3.3.
Doctor Mode Table 3
Item
FL Display
Key Operation
Mode Name
Description
Front Key
Cold Start
The [NO DISC] display will appear after 2s,
To display result of self
adjustment for CD.
adjustment for CD.
The [NO DISC] display will appear after 3s,
In Doctor Mode:
Press [
Press [
] follow by [1] & then [4]
button on the remote control.
To cancel, press [0] button on remote
control. It returns Doctor Mode.
To cancel, press [0] button on remote
control. It returns Doctor Mode.
To exit Doctor Mode, press
but-
ton on main unit or on the remote control.
In Doctor Mode:
Press [
Press [
] follow by [1] & then [5]
button on the remote control.
To cancel, press [0] button on remote
control. It returns Doctor Mode.
To cancel, press [0] button on remote
control. It returns Doctor Mode.
To exit Doctor Mode, press
but-
ton on main unit or on the remote control.
In Doctor Mode:
Press [SLEEP] button on remote
control.
To cancel, press [0] button on remote
control. It returns Doctor Mode.
Press [SLEEP] button on remote
control.
To cancel, press [0] button on remote
control. It returns Doctor Mode.
To exit Doctor Mode, press
but-
ton on main unit or on the remote control.
To cancel, press [0] button on remote
control. It returns Doctor Mode.
control. It returns Doctor Mode.
To exit Doctor Mode, press
but-
ton on main unit or on the remote control.
CD Self-Adjusment
Display
Display
CD Combination Test
To check the open/close
operation & inner outer disc
access operation.
1. It fails when CD
open/close is not completed
by 4s.
2. The disc access fails in
10s.
3. The traverse is out of
focus for more than 2s.
operation & inner outer disc
access operation.
1. It fails when CD
open/close is not completed
by 4s.
2. The disc access fails in
10s.
3. The traverse is out of
focus for more than 2s.
Refer to 8.3.7 for more
information
information
To activate cold start upon
next power up.
(Backup data are initialized)
next power up.
(Backup data are initialized)
EEPROM Checksum
To check sum of EEPROM
for a simplifield ROM
correction.
1. When EEPROM is not
detected, the only micro-p’s
version shall be displayed
without an EEPROM’s
check sum
for a simplifield ROM
correction.
1. When EEPROM is not
detected, the only micro-p’s
version shall be displayed
without an EEPROM’s
check sum
In any mode:
Press
Press
[ ]
button on main unit follow by
[4] & then [7] on the remote control.
EEPROM not detected only firmware is display
Version Display
(DEC)
(DEC)
Check sum
(HEX)
(HEX)
CD Traverse Test
Mode
Mode
To check for the traverse unit
operation. In this mode, the
first & last track is access &
read. (TOC). It fails when
TOC is not completed by 10s
or the traverse is out of
focus. for more than 2s
operation. In this mode, the
first & last track is access &
read. (TOC). It fails when
TOC is not completed by 10s
or the traverse is out of
focus. for more than 2s
Refer to 8.3.6 for more
information
information
In Doctor Mode:
Press [
Press [
] follow by [1] & then [2]
button on the remote control.
To cancel, press [0] button on remote
control. It returns Doctor Mode.
To cancel, press [0] button on remote
control. It returns Doctor Mode.
To exit Doctor Mode, press
but-
ton on main unit or on the remote control.
The counter will increment by 1 until reach
99999999
22
8.3.4.
Doctor Mode Table 4
Item
FL Display
Key Operation
Mode Name
Description
Front Key
In Doctor Mode:
Press [
Press [
] follow by [1] & then [6]
button on the remote control.
To cancel, press [0] button on remote
control. It returns Doctor Mode.
To cancel, press [0] button on remote
control. It returns Doctor Mode.
To exit Doctor Mode, press
but-
ton on main unit or on the remote control.
In Doctor Mode:
Press [4] button on the remote control.
Press [4] button on the remote control.
To cancel, press [0] button on remote
control. It returns Doctor Mode.
control. It returns Doctor Mode.
To exit Doctor Mode, press
but-
ton on main unit or on the remote control.
Region Checking
To check Region setting of
unit.
unit.
Refer to 8.3.8 for the
Region
Setting destination
Region Setting destination
CD LSI 947 Version
Check
Check
To check CD LSI Version
No. & checksum correction
No. & checksum correction
Model setting
To check Model Setting.
Refer to 8.3.9 for the Model
Setting
Setting
Year of sales
ROM type
Running version
number
number
In Doctor Mode:
Press [
Press [
] follow by [1] & then [8]
button on the remote control.
To cancel, press [0] button on remote
control. It returns Doctor Mode.
To cancel, press [0] button on remote
control. It returns Doctor Mode.
To exit Doctor Mode, press
but-
ton on main unit or on the remote control.
Model Setting
Check sum display (HEX)
The display will appear after 2s,
The [NO DISC] display will appear after 2s,
23
8.3.5.
Mecha Sliding Panel Reliability
8.3.6.
CD Traverse Test (For CD)
24
8.3.7.
CD Combination Test (For CD)
8.3.8.
Region Check Table (For Tuner)
8.3.9.
Model setting
Region
Model
Series
Country
2 (D)
PMX5
Japan
Japan
4
PMX5
EG
S.America (except Argentina)
5
PMX5
DBEB
UK
9
PMX5
DBGN
Oceania
Region No.
Function
Model
With iPod
With Shock Proof
S0
O
O
PMX5
Click on the first or last page to see other SA-PMX5EG / SC-PMX5EE-S service manuals if exist.