Panasonic SA-PMX5EG / SC-PMX5EE-S Service Manual ▷ View online
33
9.8.
Disassembly of iPod Lid
• Refer to “Disassembly of Top Cabinet Block”.
• Refer to “Disassembly of Headphone P.C.B.”.
• Refer to “Disassembly of iPod P.C.B.”.
• Refer to “Disassembly of iPhone Docking Unit”.
• Refer to “Disassembly of Headphone P.C.B.”.
• Refer to “Disassembly of iPod P.C.B.”.
• Refer to “Disassembly of iPhone Docking Unit”.
Step 1 : Remove 1 screw.
Step 2 : Slightly lift up the iPod Cover Lid from the locator.
Step 3 : Release the iPod Cover Lid from the catch.
Step 4 : Remove the iPod Cover Lid.
34
Caution 1 : During assembling, ensure the iPod Cover Lid
is properly seated on the locators and slot into the hole of
the iPhone Docking Unit.
Caution 2 : During assembling, ensure the iPod Cover Lid
is properly catch to the iPhone Docking Unit and a “click”
sound will be heard when fully catched.
is properly seated on the locators and slot into the hole of
the iPhone Docking Unit.
Caution 2 : During assembling, ensure the iPod Cover Lid
is properly catch to the iPhone Docking Unit and a “click”
sound will be heard when fully catched.
Step 5 : Open the iPod Lid by pressing as arrow shown.
Step 6 : Release the Lid Spring as shown.
Step 7 : Remove the Lid Spring as shown.
Caution : Keep the Lid Spring in safe place and place them
back during assembling.
Caution : Keep the Lid Spring in safe place and place them
back during assembling.
35
Step 8 : Push the shaft (A) of the iPod Lid in the direction as
shown.
Caution : Do not exert strong force to the iPod lid during
removal.
shown.
Caution : Do not exert strong force to the iPod lid during
removal.
Step 9 : Lift up the iPod lid as shown.
Step 10 : Push the shaft (B) of the iPod Lid in the direction as
shown.
Caution : Do not exert strong force to the iPod lid during
removal.
shown.
Caution : Do not exert strong force to the iPod lid during
removal.
Step 11 : Lift up the iPod lid as shown.
36
Step 12 : Remove the iPod lid as shown.
9.9.
Disassembly of Front Panel
Block
Block
• Refer to “Disassembly of Top Cabinet Block”.
Step 1 : Remove 1 screw.
Step 2 : Release the 2P Ground Wire on Main P.C.B..
Step 2 : Release the 2P Ground Wire on Main P.C.B..
Step 3 : Detach 18P FFC at the connector (CN1100) on the
Main P.C.B..
Step 4 : Detach 5P Cable Wire at the connector (CN6201) on
the Main P.C.B..
Main P.C.B..
Step 4 : Detach 5P Cable Wire at the connector (CN6201) on
the Main P.C.B..
Click on the first or last page to see other SA-PMX5EG / SC-PMX5EE-S service manuals if exist.