Panasonic SA-BTT460GS / SA-BTT460PH / SA-BTT480EE / SA-BTT480GS / SC-BTT480EEK Service Manual ▷ View online
77
Step 7 Attach a short pin to the 45P FFC of the BD Mechanism.
12.20. Replacement of Traverse Unit
• Refer to “Disassembly of Top Cabinet”.
• Refer to “Disassembly of Tray Ornament”.
• Refer to “Disassembly of Tray Ornament”.
12.20.1. Disassembly of Traverse Unit
Step 1 Slide the Slide Cam until it come to a stop.
Step 2 Lift up the OPU FFC Sheet from the catches.
Step 3 Push the OPU FFC Sheet from the guides.
Step 3 Push the OPU FFC Sheet from the guides.
78
Step 4 Release the 45P FFC from the Guide.
Step 5 Release 5P FFC.
Caution: Avoid using strong force, to prevent damage on
the FPC.
Step 6 Release 4P FPC.
Caution: Avoid using strong force, to prevent damage on
the FPC.
Step 6 Release 4P FPC.
Step 7 Press the hook downwards.
Step 8 Lift up the Turning Shaft of the Mid Base as shown.
Step 8 Lift up the Turning Shaft of the Mid Base as shown.
79
Step 9 Press the hook downwards.
Step 10 Release the Turning Shaft of the Mid Base as shown.
Step 10 Release the Turning Shaft of the Mid Base as shown.
Step 11 Align the bosses of the Mid Base with the grooves of
the Slide Cam.
the Slide Cam.
Step 12 Slightly tilt and lift up the arm of Mid Base at location
as shown.
as shown.
80
Step 13 Hold the arms of Mid Base, slightly pull backward and
lift up the Traverse unit as shown.
lift up the Traverse unit as shown.
Step 14 While holding the Traverse unit, insert the Screwdriver
at the Damper (Location A).
Step 15 Push out the Traverse unit as shown.
Caution: During dissembling, ensure the Traverse unit do
not hit to the Slide Cam.
at the Damper (Location A).
Step 15 Push out the Traverse unit as shown.
Caution: During dissembling, ensure the Traverse unit do
not hit to the Slide Cam.
Step 16 Insert the Screwdriver at the Damper (Location B).
Step 17 Push up the Traverse unit as shown.
Step 18 Remove the Traverse unit.
Caution: During dissembling, ensure the Traverse unit do
not hit to the Slide Cam.
Step 17 Push up the Traverse unit as shown.
Step 18 Remove the Traverse unit.
Caution: During dissembling, ensure the Traverse unit do
not hit to the Slide Cam.
Click on the first or last page to see other SA-BTT460GS / SA-BTT460PH / SA-BTT480EE / SA-BTT480GS / SC-BTT480EEK service manuals if exist.