Panasonic SA-BTT460GS / SA-BTT460PH / SA-BTT480EE / SA-BTT480GS / SC-BTT480EEK Service Manual ▷ View online
57
Step 5 Press to release and remove the Top Cabinet.
Caution: Avoid touching electrical components when the
hand is inserted under the Top Cabinet.
Caution: Avoid touching electrical components when the
hand is inserted under the Top Cabinet.
Caution: During assembling, ensure that the Top Cabinet
is fully inserted into the Front Panel Block.
is fully inserted into the Front Panel Block.
12.5. Replacement of Tray Ornament
12.5.1.
Disassembly of Tray Ornament
Step 1 Use a Paper Clip and insert into the hole at the bottom
of the unit.
Step 2 Push the Paper Clip sideway in the direction of the
arrow to eject Tray.
of the unit.
Step 2 Push the Paper Clip sideway in the direction of the
arrow to eject Tray.
Step 3 Gently pull out the Tray out as direction of arrow.
Caution: Do not use strong forces.
Caution: Do not use strong forces.
58
Step 4 Release catches.
Caution: During assembling, ensure that the Tray Orna-
ment is inserted and fully catched onto the Tray.
Caution: During assembling, ensure that the Tray Orna-
ment is inserted and fully catched onto the Tray.
Step 5 Remove the Tray Ornament in the direction of arrow.
12.5.2.
Assembly of Tray Ornament
Step 1 Align the guide rib of the Tray Ornament with the tray.
Step 2 Insert the Tray Ornament until it is fully catched onto the
Tray.
Step 2 Insert the Tray Ornament until it is fully catched onto the
Tray.
Step 3 Slide the Tray in until it closes fully.
59
12.6. Disassembly of Front Panel
Block
• Refer to “Disassembly of Top Cabinet”.
• Refer to “Disassembly of Tray Ornament”.
• Refer to “Disassembly of Tray Ornament”.
Step 1 Detach 3P Cable at the connector (CN2305) on Digital
P.C.B..
P.C.B..
Step 2 Release tabs at each side of the Front Panel Block in
the direction of arrow.
the direction of arrow.
Step 3 Release tabs at the bottom of the unit.
Caution: Do not exert strong force when releasing the tabs.
Caution: Do not exert strong force when releasing the tabs.
Caution: During assembling, ensure that the Front Panel
Block is properly inserted and fully catched onto the bot-
tom chassis.
Block is properly inserted and fully catched onto the bot-
tom chassis.
60
Step 4 Remove the Front Panel Block.
12.7. Disassembly of Tact P.C.B. and
Power Button P.C.B.
• Refer to “Disassembly of Top Cabinet”.
• Refer to “Disassembly of Tray Ornament”.
• Refer to “Disassembly of Front Panel Block”.
• Refer to “Disassembly of Tray Ornament”.
• Refer to “Disassembly of Front Panel Block”.
Step 1 Remove 2 screws.
Step 2 Remove 1 screw.
Step 3 Lift up to remove the Tact P.C.B..
Caution: During assembling, ensure that the Tact P.C.B. is
properly located and seated onto the Front Panel Block.
Caution: During assembling, ensure that the Tact P.C.B. is
properly located and seated onto the Front Panel Block.
Step 4 Release 3P Wire from the ribs of the Front Panel Block.
Caution: During assembling, dressed the 3P Wire into the
ribs of the Front Panel Block.
Caution: During assembling, dressed the 3P Wire into the
ribs of the Front Panel Block.
Step 5 Lift up the Power Button P.C.B..
Step 6 Remove the Tact P.C.B. and Power Button P.C.B..
Step 6 Remove the Tact P.C.B. and Power Button P.C.B..
Click on the first or last page to see other SA-BTT460GS / SA-BTT460PH / SA-BTT480EE / SA-BTT480GS / SC-BTT480EEK service manuals if exist.