Panasonic SA-BTT460GS / SA-BTT460PH / SA-BTT480EE / SA-BTT480GS / SC-BTT480EEK Service Manual ▷ View online
61
Caution: During assembling, ensure that the Power Button
P.C.B. is properly located and seated onto the Front Panel
Block.
P.C.B. is properly located and seated onto the Front Panel
Block.
12.8. Disassembly of Panel P.C.B.
• Refer to “Disassembly of Top Cabinet”.
• Refer to “Disassembly of Tray Ornament”.
• Refer to “Disassembly of Front Panel Block”.
• Refer to “Disassembly of Tray Ornament”.
• Refer to “Disassembly of Front Panel Block”.
Step 1 Detach 5P FFC at the connector (P6805) on Panel
P.C.B..
Step 2 Detach 5P FFC at the connector (P6804) on Panel
P.C.B..
Step 3 Detach 23P Bridge Connector at the connector
(P59301) on Digital P.C.B..
Step 4 Detach 15P Bridge Connector at the connector
(CN2304) on Digital P.C.B..
P.C.B..
Step 2 Detach 5P FFC at the connector (P6804) on Panel
P.C.B..
Step 3 Detach 23P Bridge Connector at the connector
(P59301) on Digital P.C.B..
Step 4 Detach 15P Bridge Connector at the connector
(CN2304) on Digital P.C.B..
Step 5 Remove 3 screws.
Step 6 Remove the Panel P.C.B..
Step 6 Remove the Panel P.C.B..
Caution: During assembling, ensure that the Panel P.C.B.
is properly located and seated onto the bottom chassis.
is properly located and seated onto the bottom chassis.
62
12.9. Disassembly of Rear Panel
• Refer to “Disassembly of Top Cabinet”
Step 1 Remove 12 screws.
Step 2 Release tabs at each side of the Rear Panel in the
direction of arrow.
direction of arrow.
Step 3 Remove the Rear Panel.
12.10. Disassembly of Fan Unit
• Refer to “Disassembly of Top Cabinet”
Step 1 Detach the 3P Wire at connector (CN5401) on Digital
P.C.B..
Step 2 Remove 2 screws.
Step 3 Lift up to remove the Fan Unit.
Step 3 Lift up to remove the Fan Unit.
Caution: During assembling, ensure the Fan Unit is placed
correctly as shown below and the 3P Wire is connected at
connector (CN5401) on Digital P.C.B..
correctly as shown below and the 3P Wire is connected at
connector (CN5401) on Digital P.C.B..
63
12.11. Disassembly of Digital P.C.B.
• Refer to “Disassembly of Top Cabinet”.
Caution: If the Digital P.C.B. and/or Mechanism Unit is
exchanged, the drive adjustment is required because of
the adjustment data is stored in the Digital P.C.B.. Perform
the drive adjustment accordance with Section 14 “When
Replacing the Mechanism Unit and/or Digital P.C.B.”.
Step 1 Remove 10 screws.
Step 2 Release tabs at each side of the Rear Panel in the
direction of arrow.
direction of arrow.
Step 3 Detach 4P FFC at the connector (P55006) on Digital
P.C.B..
Step 4 Detach 45P FFC at the connector (P55001) on Digital
P.C.B..
Step 5 Detach 3P Cable at the connector (CN2305) on Digital
P.C.B..
Step 6 Detach 3P Fan Wire at the connector (CN5401) on Dig-
ital P.C.B..
P.C.B..
Step 4 Detach 45P FFC at the connector (P55001) on Digital
P.C.B..
Step 5 Detach 3P Cable at the connector (CN2305) on Digital
P.C.B..
Step 6 Detach 3P Fan Wire at the connector (CN5401) on Dig-
ital P.C.B..
Step 7 Detach 23P Bridge Connector at the connector
(P59301) on Digital P.C.B..
Step 8 Detach 15P Bridge Connector at the connector
(CN2304) on Digital P.C.B..
Step 9 Detach 9P Bridge Connector at the connector (CN2309)
on Digital P.C.B..
Step 10 Detach 23P Bridge Connector at the connector
(CN2303) on Digital P.C.B..
(P59301) on Digital P.C.B..
Step 8 Detach 15P Bridge Connector at the connector
(CN2304) on Digital P.C.B..
Step 9 Detach 9P Bridge Connector at the connector (CN2309)
on Digital P.C.B..
Step 10 Detach 23P Bridge Connector at the connector
(CN2303) on Digital P.C.B..
64
Step 11 Remove 3 screws.
Step 12 Remove the Digital P.C.B..
Step 12 Remove the Digital P.C.B..
Caution: During assembling, ensure that the Digital P.C.B.
is properly located and seated onto the bottom chassis.
is properly located and seated onto the bottom chassis.
12.12. Disassembly of Damp P.C.B.
• Refer to “Disassembly of Top Cabinet”.
Step 1 Remove 10 screws.
Step 2 Release tabs at each side of the Rear Panel in the
direction of arrow.
direction of arrow.
Click on the first or last page to see other SA-BTT460GS / SA-BTT460PH / SA-BTT480EE / SA-BTT480GS / SC-BTT480EEK service manuals if exist.