Panasonic SA-BFT800EE / SA-BFT800EEK Service Manual ▷ View online
113
Caution: During assembling of the docking holder, place
the docking holder underneath the catch and use the 2
locators as guide to ensure that the docking holder is
properly located.
the docking holder underneath the catch and use the 2
locators as guide to ensure that the docking holder is
properly located.
Step 11 Remove iPod Tub Assembly.
Caution: During assembling, ensure that iPod Assembly is
seated properly onto Front Cabinet.
seated properly onto Front Cabinet.
10.35. Disassembly of iPod P.C.B.
• Refer to “Disassembly of Door Assembly”.
• Refer to “Disassembly of Back Cabinet Assembly”.
• Refer to “Disassembly of iPod Tub Assembly”.
• Refer to “Disassembly of Back Cabinet Assembly”.
• Refer to “Disassembly of iPod Tub Assembly”.
Step 1 Remove 2 screws.
Step 2 Release the 2 catches on iPod Assembly.
Step 3 Remove the docking tub.
114
Step 4 Remove the iPod P.C.B. as arrow shown.
Caution: During assembling, ensure that Docking Tub is
fully catched onto Docking Cover.
fully catched onto Docking Cover.
10.36. Disassembly of IR P.C.B.
• Refer to “Disassembly of Back Cabinet Assembly”.
Step 1 Remove 1 screw.
Step 2 Release 2 catches.
Step 2 Release 2 catches.
Step 3 Lift up IR P.C.B..
Caution (1): During assembling, ensure that IR P.C.B. is
properly located & fully seated on the Front Cabinet.
Caution (2): During assembling, dress 2P wire behind the
hook according to diagram shown.
Caution (1): During assembling, ensure that IR P.C.B. is
properly located & fully seated on the Front Cabinet.
Caution (2): During assembling, dress 2P wire behind the
hook according to diagram shown.
Step 4 Detach 6P FFC at the connector (CN6551) on IR
P.C.B..
Step 5 Detach 2P Wire at the connector (CN6301) on IR
P.C.B..
Step 6 Remove IR P.C.B..
P.C.B..
Step 5 Detach 2P Wire at the connector (CN6301) on IR
P.C.B..
Step 6 Remove IR P.C.B..
10.37. Disassembly of SD Lid
• Refer to “Disassembly of Back Cabinet Assembly”.
Step 1 Release the SD Lid Spring by using a flat head screw
driver in the direction of arrow.
driver in the direction of arrow.
115
Step 2 Release both sides of SD Lid by using a flat head screw
driver in the direction of arrow (1) & (2).
Step 3 Remove SD Lid.
driver in the direction of arrow (1) & (2).
Step 3 Remove SD Lid.
116
11 Service Position
Note: For description of the disassembly procedures, see the section 10.
11.1. Checking & repairing of Digital P.C.B. (Side A)
Step 1 Remove Back Cabinet Assembly.
Step 2 Remove Digital Shield.
Step 3 Place main unit onto 2 insulator block (eg.: 2 boxes).
Step 4 Place a mirror under the main unit. (To show contents of FL Display from mirror).
Step 5 Side A of Digital P.C.B. can be checked and repaired at its original position.
Step 2 Remove Digital Shield.
Step 3 Place main unit onto 2 insulator block (eg.: 2 boxes).
Step 4 Place a mirror under the main unit. (To show contents of FL Display from mirror).
Step 5 Side A of Digital P.C.B. can be checked and repaired at its original position.
Click on the first or last page to see other SA-BFT800EE / SA-BFT800EEK service manuals if exist.