Panasonic SA-BFT800EE / SA-BFT800EEK Service Manual ▷ View online
93
Step 5 Remove Joint Shield.
Caution: During assembling, ensure that Joint Shield is properly located & fully seated onto Digital Chassis & SMPS Chas-
sis. Replace Conductive Cloth F if torn.
Caution: During assembling, ensure that Joint Shield is properly located & fully seated onto Digital Chassis & SMPS Chas-
sis. Replace Conductive Cloth F if torn.
Step 6 Remove 3 screws.
Caution: During assembling, ensure that Digital Chassis is properly located & fully seated onto Front Cabinet.
Step 7 Remove Digital Chassis.
Caution: During assembling, ensure that Digital Chassis is properly located & fully seated onto Front Cabinet.
Step 7 Remove Digital Chassis.
94
Caution: During assembling, ensure that Digital Chassis is properly located & fully seated onto Front Panel’s with all FFC
and wires dressed before screwing.
and wires dressed before screwing.
95
10.19. Disassembly of BD Traverse
• Refer to “Disassembly of Back Cabinet Assembly”.
• Refer to “Disassembly of Digital Shield”.
• Refer to (Step 1) to (Step 23) of Item 10.16.
• Refer to (Step 1) to (Step 7) of Item 10.17.
• Refer to “Disassembly of SMPS Shield Unit”.
• Refer to “Disassembly of Digital Chassis”.
• Refer to “Disassembly of Digital Shield”.
• Refer to (Step 1) to (Step 23) of Item 10.16.
• Refer to (Step 1) to (Step 7) of Item 10.17.
• Refer to “Disassembly of SMPS Shield Unit”.
• Refer to “Disassembly of Digital Chassis”.
Step 1 Remove 4 screws.
Step 2 Remove BD Traverse.
Step 2 Remove BD Traverse.
Step 3 Release 2 catches.
Caution: Avoid touching the lens during assembling & dis-
assembling.
Caution: Avoid touching the lens during assembling & dis-
assembling.
Step 4 Remove BD Traverse.
Caution (1): During assembling, insert the 45P FFC
through the hole of BD Traverse Chassis properly as arrow
(1) shown.
Caution (2): During assembling, insert the 8P FFC through
the hole of BD Traverse Chassis properly as arrow (2)
shown.
through the hole of BD Traverse Chassis properly as arrow
(1) shown.
Caution (2): During assembling, insert the 8P FFC through
the hole of BD Traverse Chassis properly as arrow (2)
shown.
Caution: During assembling, dress the 8P FFC & 45P FFC
under the hooks of BD Traverse Chassis properly.
under the hooks of BD Traverse Chassis properly.
96
10.20. Disassembly of FL P.C.B.
• Refer to “Disassembly of Back Cabinet Assembly”.
• Refer to “Disassembly of Digital Shield”.
• Refer to (Step 1) to (Step 23) of item 10.16.
• Refer to (Step 1) to (Step 7) of item 10.17.
• Refer to “Disassembly of SMPS Shield Unit”.
• Refer to “Disassembly of Digital Chassis”.
• Refer to “Disassembly of Digital Shield”.
• Refer to (Step 1) to (Step 23) of item 10.16.
• Refer to (Step 1) to (Step 7) of item 10.17.
• Refer to “Disassembly of SMPS Shield Unit”.
• Refer to “Disassembly of Digital Chassis”.
Step 1 Remove 1 screw.
Step 2 Detach 3P wire at the connector (CN6502) on FL
P.C.B..
Caution: During assembling, ensure that 3P wire is prop-
erly dressed behind ribs of Front Cabinet.
Step 3 Remove FL P.C.B..
Caution: During assembling, ensure that FL P.C.B. is prop-
erly located & fully seated onto Front Cabinet.
Step 2 Detach 3P wire at the connector (CN6502) on FL
P.C.B..
Caution: During assembling, ensure that 3P wire is prop-
erly dressed behind ribs of Front Cabinet.
Step 3 Remove FL P.C.B..
Caution: During assembling, ensure that FL P.C.B. is prop-
erly located & fully seated onto Front Cabinet.
10.21. Disassembly of Interlock P.C.B.
• Refer to “Disassembly of Back Cabinet Assembly”.
• Refer to “Disassembly of Digital Shield”.
• Refer to (Step 1) to (Step 23) of Item 10.16.
• Refer to (Step 1) to (Step 9) of Item 10.17.
• Refer to “Disassembly of SMPS Shield Unit”.
• Refer to “Disassembly of Digital Chassis”.
• Refer to “Disassembly of Gear Box Assembly”.
• Refer to “Disassembly of FL P.C.B.”.
• Refer to “Disassembly of Digital Shield”.
• Refer to (Step 1) to (Step 23) of Item 10.16.
• Refer to (Step 1) to (Step 9) of Item 10.17.
• Refer to “Disassembly of SMPS Shield Unit”.
• Refer to “Disassembly of Digital Chassis”.
• Refer to “Disassembly of Gear Box Assembly”.
• Refer to “Disassembly of FL P.C.B.”.
Caution: During assembling, ensure that 4P wire is prop-
erly dressed as diagram shown.
Step 1 Remove 1 screw.
Step 2 Release 3 catches.
Step 3 Lift up Interlock P.C.B..
erly dressed as diagram shown.
Step 1 Remove 1 screw.
Step 2 Release 3 catches.
Step 3 Lift up Interlock P.C.B..
Caution: During assembling, ensure that Interlock P.C.B. is
properly located & fully catched onto Front Cabinet.
properly located & fully catched onto Front Cabinet.
Step 4 Detach 10P wire at the connector (CN6300) on Inter-
lock P.C.B..
Step 5 Detach 2P wire at the connector (CN6302) on Interlock
P.C.B..
Step 6 Desolder 4P Cable at the connector (CN6450) on Inter-
lock P.C.B..
Step 7 Remove Interlock P.C.B..
lock P.C.B..
Step 5 Detach 2P wire at the connector (CN6302) on Interlock
P.C.B..
Step 6 Desolder 4P Cable at the connector (CN6450) on Inter-
lock P.C.B..
Step 7 Remove Interlock P.C.B..
Click on the first or last page to see other SA-BFT800EE / SA-BFT800EEK service manuals if exist.