Panasonic CS-YW7MKD / CS-YW9MKD / CS-YW12MKD / CS-YW7MKD-1 / CS-YW9MKD-1 / CS-YW12MKD-1 / CU-YW7MKD / CU-YW9MKD / CU-YW12MKD / CU-YW7MKD-1 / CU-YW9MKD-1 / CU-YW12MKD-1 Service Manual ▷ View online
33
WARNING
14. Disassembly and Assembly Instructions
High Voltage is generated in the electrical parts area by the capacitor. Ensure that the capacitor has discharged
sufficiently before proceeding with repair work. Failure to heed this caution may result in electric shocks.
1. Open the intake grille and pull it to the horizontal position.
3. Pull up the front panel and be careful of the hooks on both sides of intake grille. Slightly press the pieces and pull
the front panel off.
1. Remove the two caps at the discharge port (right and left) and then release the two screws on both sides.
Removal Procedure for front panel
Removal Procedure for Front Grille
Cap
Screw
34
2.Remove the air filters and then pull out the front grille form the unit body.
1. Separate the drain hose and the drain plate. 2. Pull out the discharge grille slightly.
Front grille
Removal Procedure for Discharge Grille
35
1. Release fixing
screws on both side, disassembly the fixing board from
evaporator on the
left side and pull out the whole evaporator.
2. Loose the fixing screw of the cross flow fan.
3. After removing the bearing, indoor fan can be taken out from the left side
4. Lift up the indoor fan slightly, and then pull the fan motor out.
Removal Procedure for Cross Flow Fan
Fixing Screw
Bearing
Fan motor
36
15. Exploded View and Replacement Pars List
15.1 Indoor Unit
Note
The above exploded view is for the purpose of parts disassembly and replacement.
The non-numbered parts are not kept as standard service parts.
Click on the first or last page to see other CS-YW7MKD / CS-YW9MKD / CS-YW12MKD / CS-YW7MKD-1 / CS-YW9MKD-1 / CS-YW12MKD-1 / CU-YW7MKD / CU-YW9MKD / CU-YW12MKD / CU-YW7MKD-1 / CU-YW9MKD-1 / CU-YW12MKD-1 service manuals if exist.