Panasonic CS-ME7CB1P / CS-ME10CB1P / CS-ME12CB1P / CS-ME14CB1P / CS-ME10CD3P / CS-ME14CD3P Simplified Service Manual ▷ View online
POWER
TIMER
ODOUR
WASH
AUTO
OFF/ON
Names of Parts and Preparations
Indoor unit
* Air intake vent
* Air outlet vent
Remote control signal receiver
Long or short “beep” when signal
received.
received.
“POWER” indication lamp (green)
“TIMER” indication lamp (orange)
“ODOUR WASH” indication lamp
(green)
(green)
●
If there is a power failure, operation will be automatically restarted under the previous operation mode and air
flow direction when power is resumed. (When the operation is not stopped by remote control.)
flow direction when power is resumed. (When the operation is not stopped by remote control.)
●
If you do not want the unit to restart automatically when power is resumed, switch off the main power supply.
●
Auto Restart Control is not available when Timer or Sleep mode is set or the dry mode timer is cancelled.
Auto Restart Control
■
Receiver unit
AUTO OPERATION BUTTON
When not using the remote control.
( )
Continuously pressing the button for
about 5 seconds, a “Beep” sound will
be heard. Force control for cooling
operations is selected. It is not
r e c o m m e n d e d u n d e r n o r m a l
circumstances.
about 5 seconds, a “Beep” sound will
be heard. Force control for cooling
operations is selected. It is not
r e c o m m e n d e d u n d e r n o r m a l
circumstances.
Receiver unit
* Not supplied by manufacturer.
Duct Type
45
CS-ME7CB1P / CS-ME10CB1P / CS-ME12CB1P / CS-ME14CB1P / CS-ME10CD3P / CS-ME14CD3P
Fan Speed / Air Swing Adjustment
Changing the fan speed
●
You may select from 5 stages of fan speed apart from the
auto fan speed.
●
Continuously pressing:
The indication will change accordingly.
The increase in size of indication indicates higher fan speed.
The increase in size of indication indicates higher fan speed.
Low
High
●
During DRY mode, should the room temperature is higher
than the remote control set temperature, the fan speed will
be running to that set by the remote control. Whenever the
room temperature approaches the set temperature level,
the fan speed will be running in the Low fan speed
regardless of the indication.
be running to that set by the remote control. Whenever the
room temperature approaches the set temperature level,
the fan speed will be running in the Low fan speed
regardless of the indication.
Changing the vertical air flow directions
●
You may select from 5 stages of air flow direction apart
from the auto air swing.
●
Continuously pressing:
The indication will change accordingly
(The indications are just air flow direction guidelines, which
may differ with the actual indoor unit louvre positions and
angles)
(The indications are just air flow direction guidelines, which
may differ with the actual indoor unit louvre positions and
angles)
Press
Press
■
AUTOMATIC FAN SPEED
HEATING:
Fan speed will be running in the Low fan speed when the
air temperature is low. Fan speed will be running in the
High fan speed when the air temperature is high.
COOLING / DRY:
During COOLING mode, adjust the fan speed to create
cool air flow.
The air flow will be delayed for 40 seconds during the start
of operations under the COOLING / DRY modes.
Furthermore, sometimes there may be air flow cut off
during operation. Read the instructions for the wall-mounted
type (CS-ME7CKPG). (Page 22)
air temperature is low. Fan speed will be running in the
High fan speed when the air temperature is high.
COOLING / DRY:
During COOLING mode, adjust the fan speed to create
cool air flow.
The air flow will be delayed for 40 seconds during the start
of operations under the COOLING / DRY modes.
Furthermore, sometimes there may be air flow cut off
during operation. Read the instructions for the wall-mounted
type (CS-ME7CKPG). (Page 22)
●
You cannot change the air flow direction on the duct type.
NOTE
46
CS-ME7CB1P / CS-ME10CB1P / CS-ME12CB1P / CS-ME14CB1P / CS-ME10CD3P / CS-ME14CD3P
Fan Speed / Air Swing Adjustment
Vertical air flow direction
■
Setting automatic air flow directions
COOLING • DRY • AIR CIRCULATION
Automatically it sets to swing up and swing down.
HEATING
During starting of operations and other circumstances when the
air temperature is low, the air flow blows horizontally.
When temperature is high, air flow is blown down, then it starts
swinging.
air temperature is low, the air flow blows horizontally.
When temperature is high, air flow is blown down, then it starts
swinging.
Louvres adjustment angles
Approximately
50 degrees
●
Adjust the vertical air flow directions by only using the remote
control. (To prevent mistakes, condensation and damage)
control. (To prevent mistakes, condensation and damage)
●
At the end of operation, the louvres will automatically close up
the air flow outlet vents.
the air flow outlet vents.
●
The louvres will automatically adjust its air flow angles to
prevent condensation (during COOLING / DRY) and cold air
blowing out (during HEATING).
prevent condensation (during COOLING / DRY) and cold air
blowing out (during HEATING).
●
The louvres adjustment range during HEATING and COOLING
/ DRY may not be the same.
/ DRY may not be the same.
You can adjust the
louvres in 5 steps
within these ranges.
louvres in 5 steps
within these ranges.
●
You cannot change the air flow direction on the duct type.
NOTE
Horizontal air flow direction
●
Manually grip and move the horizontal air flow louvres.
●
The blower fan of the indoor unit is operating at a high speed, hence, be careful not to insert your fingers into
the portion behind the louvres.
the portion behind the louvres.
●
You cannot change the air flow direction on the duct type.
NOTE
47
CS-ME7CB1P / CS-ME10CB1P / CS-ME12CB1P / CS-ME14CB1P / CS-ME10CD3P / CS-ME14CD3P
Care and maintenance
Cleaning the air filter
(about once every one and a half months)
1
Press in the 3 places
shown to open the
intake grille.
shown to open the
intake grille.
Grasp the tab and pull down.
Cassette Type
For stubborn dirt and grime, apply mild
kitchen detergent (neutral type) and rinse
with water. Leave it to dry in the sun.
(Avoid drying them near the stove or
electric dryer)
kitchen detergent (neutral type) and rinse
with water. Leave it to dry in the sun.
(Avoid drying them near the stove or
electric dryer)
2
Remove the air filter
3
Suck up the dust and dirt
by a vacuum cleaner
by a vacuum cleaner
●
If the filters are being used over an extended
period of time without timely servicing, their
performance may decrease and foul odour may
build up.
period of time without timely servicing, their
performance may decrease and foul odour may
build up.
●
The maintenance period may be used as a
criterion. However, if operating conditions cause
build up of odours, you need to service it as soon
as possible.
criterion. However, if operating conditions cause
build up of odours, you need to service it as soon
as possible.
NOTE
ITEMS SOLD SEPARATELY
PART NAME
PART NUMBER
Air filter
CWD00228
4
Installing the air
filter
filter
Press in the 3 places
shown to close the
intake grille.
shown to close the
intake grille.
Push
Push
Push
Push
Push
Push
Caution
■
Ensure that the operation is stopped,
power supply is off before you do the air
conditioner cleaning.
power supply is off before you do the air
conditioner cleaning.
The internal high speed fan may cause injuries.
■
Ensure that you are on firm footing
before attempting to repair or service
the air conditioner.
before attempting to repair or service
the air conditioner.
The unit in operation may cause injuries.
Insert the tabs into the slots and
push up.
push up.
5
48
CS-ME7CB1P / CS-ME10CB1P / CS-ME12CB1P / CS-ME14CB1P / CS-ME10CD3P / CS-ME14CD3P
Click on the first or last page to see other CS-ME7CB1P / CS-ME10CB1P / CS-ME12CB1P / CS-ME14CB1P / CS-ME10CD3P / CS-ME14CD3P service manuals if exist.