Panasonic CS-MC95KE / CS-MC125KE / CS-MC76KE / CS-MC126KE / CU-MC145KE / CU-MC185KE / CU-MC205KE / CU-MC245KE / CU-MC196KE Service Manual ▷ View online
1
Press the clock button
2
Press to set the current time
Press continuously for fast forwarding.
Press continuously for fast reversing.
3
Press the clock button
•
Can be used for approximately one year.
Observe the following when replacing the batteries
•
•
Replace with new batteries of the same type .
•
Do not use rechargeable batteries (Ni-Cd).
•
Remove the batteries if the unit is not going to be used for a long period.
←
lights up
PM
PM
1
OPEN
Slide the cover to open
2
Be sure the directions are correct
•
Open the remote control
cover and confirm the
display 12:00 PM
is flashing.
cover and confirm the
display 12:00 PM
is flashing.
PM
■
Setting the clock
■
About the batteries
*
Set the current time (Clock) immediately to prevent battery exhaustion.
←
flashes
←
lights up
←
lights up
●
Remote Control
■
Inserting batteries
AIR SWING
TIMER
CLOCK
1
2
3
COOL
PM
MODE
ECONOMY
FAN SPEED
AUTO
MANUAL
ON
OFF
SET
CANCEL
SLEEP
OP
EN
49
CS-MC95KE CU-MC145KE / CS-MC95KE CU-MC185KE / CS-MC95KE CU-3MC205KE / CS-MC125KE CU-MC245KE / CS-MC76KE / CS-MC126KE CU-MC196KE
AIR SWING
TIMER
CLOCK
1
2
3
COOL
MODE
ECONOMY
FAN SPEED
AUTO
MANUAL
ON
OFF
CANCEL
SLEEP
SET
POWERFUL
OFF/ON
COOL
TEMP
HOW TO OPERATE
●
Automatic, Cooling, Soft Dry, Fan
Display
Close the Cover
a
FAN
DRY
COOL
HI
AUTO
AUTO
LO
AUTO
a
– Automatic Operation
•
Once the Automatic Operation is selected, the indoor
temperature sensor operates automatically to select
the desired operation mode with Cooling or Soft Dry.
temperature sensor operates automatically to select
the desired operation mode with Cooling or Soft Dry.
•
After the operation mode have been selected, the
mode does not change.
mode does not change.
•
Temperature is not displayed on remote control during
Auto mode operation.
Auto mode operation.
■
Operation details
COOLING
SOFT DRY
25°C
22°C
Operation
Standard temperature
TEMPERATURE
23°C
Cooling Operation
•
•
To set room temperature to your preference of cooling
comfort.
comfort.
Setting
temperature
temperature
Soft Dry operation with 10
mins. ON and 6 mins. OFF
alternately.
mins. ON and 6 mins. OFF
alternately.
Switch to Soft Dry when setting temperature is
reached.
reached.
Cooling
Operation
Operation
DRY
COOL
COOL
– Soft Dry Operation
•
•
A very gentle Cooling Operation. Consisting primarily of
dehumidifying. It does not lower the room temperature.
dehumidifying. It does not lower the room temperature.
•
During Soft Dry operation, the indoor fan operates at Low fan
speed.
speed.
DRY
1
Press to select the desired operation mode
When pressed, the display changes in this order.
When pressed, the display changes in this order.
2
Press to start the operation
POWER indicator LED (Green) on indoor unit will light up.
Press once more to stop operation.
POWER indicator LED (Green) on indoor unit will light up.
Press once more to stop operation.
3
Press to select room temperature
•
•
a
Automatic Operation
Display
- Operation with 2°C higher than standard temperature.
- Operation with standard temperature.
- Operation with 2°C lower than standard temperature.
•
Cooling, Soft Dry operation
Press to increase temperature by 1°C.
Press to decrease temperature by 1°C.
–
The temperature can be set between 16°C and 30°C.
–
Recommended temperature
For Cooling: 26°C - 28°C.
For Soft Dry: 1°C - 2°C lower than room temperature.
For Cooling: 26°C - 28°C.
For Soft Dry: 1°C - 2°C lower than room temperature.
50
CS-MC95KE CU-MC145KE / CS-MC95KE CU-MC185KE / CS-MC95KE CU-3MC205KE / CS-MC125KE CU-MC245KE / CS-MC76KE / CS-MC126KE CU-MC196KE
●
Adjusting Airflow Direction And Fan Speed
■
Operation details
– Air Circulation Operation
•
•
When the room temperature reaches the setting
temperature, operation commences at Low airflow
volume. It stops when the room temperature drops to
2°C below the setting temperature.
(It is useful when using a heater).
temperature, operation commences at Low airflow
volume. It stops when the room temperature drops to
2°C below the setting temperature.
(It is useful when using a heater).
Automatic Airflow Volume
•
•
The speed of the Indoor fan is adjusted automatically
according to the operation. The Indoor fan stops
occasionally during cooling operation.
according to the operation. The Indoor fan stops
occasionally during cooling operation.
*
Five stages of adjustments can be made in
this range.
this range.
Louver adjustment range
Press to select Fan speed
•
•
The display changes in this order
Automatic
Low
Medium
High
Selecting Vertical Airflow Direction
Press AUTO,
Press AUTO,
• The louver swing up and
down automatically.
• To stop this operation,
press MANUAL button.
Press MANUAL
•
•
Manual selection of Vertical Airflow Direction
Louver.
Louver.
•
The display changes in this order.
Horizontal Airflow Direction
•
•
Adjust it manually.
POWER
ECONOMY
POWERFUL
SLEEP
TIMER
POWER
ECONOMY
POWERFUL
SLEEP
TIMER
AIR SWING
TIMER
CLOCK
1
2
3
COOL
AUTO FAN
MODE
ECONOMY
FAN SPEED
AUTO
MANUAL
ON
OFF
SET
CANCEL
SLEEP
Air Circulation
POWER
ECONOMY
POWERFUL
SLEEP
TIMER
Cooling
Soft Dry
FAN
51
CS-MC95KE CU-MC145KE / CS-MC95KE CU-MC185KE / CS-MC95KE CU-3MC205KE / CS-MC125KE CU-MC245KE / CS-MC76KE / CS-MC126KE CU-MC196KE
AIR SWING
TIMER
CLOC
K
1
2
3
COOL
ON
AM
MODE
ECONOMY
FAN SPEED
AUTO
MANUAL
ON
OFF
SET
CANCEL
SLEEP
SETTING THE TIMER
1
Press ON-TIMER
Flashes
→
Set the ON-TIMER to 7:00AM
2
Press to set the time
Increase by 10 minutes
Decrease by 10 minutes
*
Press continuously for quick
setting.
setting.
Ensure that the current time is correct before setting the timer. The timer cannot be set if the time display is flashing.
■
Timer Cancellation Button
(To cancel the Timer)
Press the ON-TIMER or OFF-TIMER then press
CANCEL.
(To cancel the Timer)
Press the ON-TIMER or OFF-TIMER then press
CANCEL.
*
The timer indicator on the indoor unit will go off.
■
To change the setting time, follow the above steps.
AM
ON
Timer details
•
When the ON-Timer is set, operation will start before the actual set time. This is to allow the room temperature to
reach the setting temperature by the setting time (maximum of 15 minutes in advance).
reach the setting temperature by the setting time (maximum of 15 minutes in advance).
•
Once the ON-Timer is set, operation will start at the setting time everyday.
3
Press SET
Lights up
→
*
The timer indicator
(orange) on the
indoor unit will light
up.
(orange) on the
indoor unit will light
up.
AM
ON
4
To set the OFF-TIMER
Press the OFF-TIMER then follow
steps 2 and 3 as above.
Press the OFF-TIMER then follow
steps 2 and 3 as above.
52
CS-MC95KE CU-MC145KE / CS-MC95KE CU-MC185KE / CS-MC95KE CU-3MC205KE / CS-MC125KE CU-MC245KE / CS-MC76KE / CS-MC126KE CU-MC196KE
Click on the first or last page to see other CS-MC95KE / CS-MC125KE / CS-MC76KE / CS-MC126KE / CU-MC145KE / CU-MC185KE / CU-MC205KE / CU-MC245KE / CU-MC196KE service manuals if exist.