DOWNLOAD Panasonic CS-A28BKP5 / CU-A28BKP5 Service Manual ↓ Size: 13.93 MB | Pages: 77 in PDF or view online for FREE

■

If there is a power failure, operation will be
automatically restarted after 3 minutes when
the power is resumed with previous operation
mode and airflow direction.
(When the operation is not stopped by re-
mote control.)

■

If you do not intend to continue the operation
when the power is resumed, pull out the
power plug at main unit or power supply.

When you switch on the power switch, the
operation will be automatically restarted
with previous operation mode and airflow
direction.

1. If you do not require Auto Restart

Control, please consult your dealer.

2. Auto Restart Control is not available

when Timer or Sleep Mode is set.

For Heating

:

20°C

–

24°C

For Cooling

:

26°C

–

28°C

For Soft Dry

:

1°C

–

0

2°C lower than

room temperature.

m 

Cooling Operation
until room tem-
perature reaches
the setting temper-
ature

When room temperature reaches the setting tempera-
ture, operation will switch to Soft Dry.

Setting
Temperature

Super Low air-
flow amount

■

Once the Automatic Operation is selected, the

indoor temperature sensor operates automati-
cally to select the desired operation mode with
Cooling, Soft Dry or Heating.

■

The operation mode changes every hour,

when necessary.

■

Soft Dry is a very gentle Cooling Operation
consisting primarily of dehumidifying. It does
not lower the room temperature very much.

29

■

Depend on the outdoor temperature, the opera-
tion occasionally stops to melt the frost on the
outdoor unit.

■

Heat is obtained from outdoor air to warm up the
room. When the outdoor ambient air temperature
falls, the heating capacity of the unit might be
reduced.
We recommend that you use an additional heat-
ing device when the outdoor ambient air tem-
perature is low.

■

The speed of the indoor fan is adjusted automati-
cally according to the operation. The indoor fan
stops occasionally during cooling operation.

34

°

57

°

46

°

Heating

(Airflow

Direction Manual)

Heating

(Airflow

Direction Auto)

Cooling/Soft Dry

(Airflow Direction

Manual and Auto)

SWING

MANUAL

m n

2°C lower than
standard

standard

n

n o

2°C higher than
standard

▼

▼

OFF/ON 

I

FAN SPEED

MODE

i

TEMP.

MANUAL

SWING

■

The display changes in the order

each time the button is pressed.

■

Operation indication lamp (RED) will light up.

■

Press once more, to stop the operation.

■

The display changes in the order.

Automatic

          Low

            Medium

         High

■

Heating, Cooling, Soft Dry – Select temperature as desired.
(16°C ~ 30°C)

■

Automatic.

■

The vertical airflow direction louver will move up and down. Release the
button when the louver is at the desired position.

        .

■

Cooling & Soft Dry – The vertical airflow direction louver will swing up and

down automatically.

Heating – When the discharge air temperature is low such as at the start of

heating operation, the cold air blows at horizontal level.
As the temperature rises, the hot air blows in a downwards
direction.

To stop the automatic airflow direction operation, press          button.

MANUAL

30

■

If the current time is not set correctly, correct

Timer setting will not be possible.

■

When the Timer is set, the current time display

will vanish.

■

[RESET] points will clear the memory once

they are shorted.

■

[B 

↔

 A] switch is used when two air

conditioners units have been installed in one
room. Please consult your dealer.

[RESET] points

[B 

↔

 A] switch

OFF-TIMER

SET

➡

To reset the Timer.
(Example) If the OFF Timer has been set.

■

Even if there is a power failure, the setting time
is still stored in the memory because the re-
mote control is a battery operated type.

q

11

:

30

OPEN

31

■

Setting the OFF Timer.

■

Setting the ON Timer.

■

The ON Timer and OFF Timer can only be
set once during a day.

■

The operation will start before the actual
setting time with ON Timer setting.

This is to allow time to attain your desired
set temperature.

If the air conditioner is set before you go out,
the room temperature will be close to your
desired temperature when you return.

This is useful for saving electricity costs in-
curred by forgetting to turn off the air condi-
tioner.

.... to increase 10 minutes

each step.

.... to decrease 10 minutes

each step.

TIME

TIME

.... to increase 10 minutes

each step.

.... to decrease 10 minutes

each step.

.... to increase 10 minutes

each step.

.... to decrease 10 minutes

each step.

TIME

OFF-TIMER

   q

SET

0N-TIMER

SET

OFF-TIMER

CANCEL

SET

0N-TIMER

Cooling and Soft Dry

: 15 minutes before

Heating and Automatic : 30 minutes before

TIME

.... to advance the time

.... to reverse the time

   q

■

Set hours and minutes

■

OFF Timer

Set hours and minutes

The “OFF-TIMER” will blink.

■

ON Timer

Set hours and minutes

The “ON-TIMER” will blink.

■

OFF Timer

■

(Example) To change the ON Timer setting time.

Change hours and minutes setting

The Timer indication lamp at main
unit will light up. LED colour: Orange.

●

The Timer indication lamp at
main unit will go off.

●

To cancel the ON Timer, follow
the same procedure.

The Timer indication lamp at main
unit will light up. LED colour: Orange.

32