LG F1232RDSW Service Manual ▷ View online
9
HOW TO CONNECT INLET HOSE
• Check that the rubber packing is inside of the
valve connector.
• Connect the inlet hose firmly to prevent leak.
The drain hose should be placed under 100cm from the floor.
The drain hose should be placed under 100cm from the floor.
CONNECT DRAIN HOSE
CONNECT POWER PLUG
Make sure that the hose is not twisted.
Connect the power plug to the wall outlet.
Avoid connecting several electric devices,
It may be the cause of the fire.
It may be the cause of the fire.
Avoid submerging the end of the hose.
Hot
Cold
10
Preparation for
washing.
washing.
Press the POWER button.
Press the Start/Pause
button.
button.
Connect the power plug to
the outlet.
Connect the inlet hose.
the outlet.
Connect the inlet hose.
Press the Temp. button
and the present temperature will
be displayed.
and the present temperature will
be displayed.
Check if the drum rotates
clockwise and counterclockwise.
clockwise and counterclockwise.
Check the water heating.
Check automatic reverse
turn.
turn.
Check if water is supplied
through the detergent dispenser.
through the detergent dispenser.
Check the water supply.
If SVC is needed during
Check, remove
the remaining water by pulling
out the hose cap.
Check, remove
the remaining water by pulling
out the hose cap.
Water removal
Power off and then power on.
Check if the door can be
opened after 3 minutes.
Check if the door can be
opened after 3 minutes.
Power off and open the
door
door
Turn off Wash and Rinse after
pressing the Start/Pause button
and start the machine again.
Check drain and spin.
pressing the Start/Pause button
and start the machine again.
Check drain and spin.
Check drain and spin
In case of Coloreds program.
TEST OPERATION
11
11
6. WIRING DIAGRAM / PROGRAM CHART
12
5. OPERATION
POWER BUTTON
Use this button to turn the power
On/Off
On/Off
.
CYCLE SELECTOR KNOB
Rotate the Cycle
selector knob
selector knob
to select
the cycle designed for
different types of fabric
and soil levels.
different types of fabric
and soil levels.
START/PAUSE BUTTON
Use this button to Start/
Stop the washer.
Stop the washer.
WASH BUTTON
Pre Wash
: Use this option for loads that need pretreatment. This adds
16 minutes of prewashing before draining.
Intensive
: If the laundry is heavily soiled “intensive” option is effective.
Normal
: This option is automatically selected in every course except for
Rinse+Spin.
Light
: This cycle is suitable for lightly soiled clothing.
Shoes Wash
: Use this option when you want to wash slippers or shoes.
EST. TIME REMAINING
This display shows:
a) the estimated time remaining in the
cycle when operating.
b) an error code when an error has been
detected.
Click on the first or last page to see other F1232RDSW service manuals if exist.