DOWNLOAD LG F1232RDSW Service Manual ↓ Size: 7.42 MB | Pages: 46 in PDF or view online for FREE

Spin

Rinse

Check the S.PRESSURE SWITCH
ASSEMBLY or HOSE (Pressure).
If the problem is on the
S.PRESSURE SWITCH
ASSEMBLY or the HOSE, replace
the S.PRESSURE SWITCH
ASSEMBLY or the HOSE.

Correct the connector.

Normal

Replace the STATOR
ASSEMBLY

Replace Door Assembly.

Check the DOOR SWITCH
ASSEMBLY Connector and
MAIN PWB ASSEMBLY
(Natural 4 pin).

Replace the DOOR
SWITCH ASSEMBLY.

When pressing Rinse, Spin. and POWER buttons
at the same time after power off, press the
Start/Pause button 2 times, is the drum low speed
spin?

Is it disconnected, or disassembled?
[Red:3pin(1), GY:4pin(2)]

Replace the MAIN PWB ASSEMBLY

Does the spring of Latch Hook actuate?

Is there clicking sound once or twice when the
START/ PAUSE

button is pressed to start the cycle?

Is DOOR SWITCH ASSEMBLY broken?

Check on the spinning, is the frequency of the
water level 248 or more. The frequency can be
checked by pressing the Rinse and Spin. buttons at
the same time on the program.

Check the motor connector, is the resistance of
the terminal same as the figure?
MOTOR TERMINAL (1)

Resistance of terminal:

~

/  ~

/  ~

: About 5Ω ~15Ω

Replace the thermistor.
(6322FR2046B)

Clean the bellows

Is the resistance of 1 thermistors on
dry duct 2.5k

Ω

~ 180k

Ω

(at 105

~ 0 )

Disassemble the cabinet cover and
condensing bellows.
Is there any foreign object in condensing
bellows.

Disassemble the dry fan assy and dry duct
upper, and clean foreign object in duct and
fan.

Replace the thermostat.

Replace the dry heater.

Reconnect the
receptacle

Replace the
PWB ASSEMBLY(Main)

Is thermostat closed?

When checking voltage between connectors
( 

, 

) on drying, is the voltage

AC 220-240V as the figure?
(wire color :

-YL , 

- BK)

Are receptacles correctly connected to
the terminals of the DRY DUCT
ASSEMBLY?

After power off, is the resistance of
dry heater 10 ~ 40

Ω

?

(1)

(1)
(2)

(3)

Replace the DRY FAN
ASSEMBLY.

Replace the
PWB ASSEMBLY(Main)

Reconnect or
repair connector.

Check the motor connector, is the resistance
of terminal same as the figure?
Resistance of terminal : 

- 

2~5

Ω

- 

: 2~5

Ω

Is it disconnected, or disassembled?

(1)-Yellow, 3pin

When checking woltage between connectors

(1)~(2), (2)~(3) on drying, is the

voltage DC 20~30V as the figure?

wire color: (1)-White, (2)-Black

(3)-Yellow