JBL SUB 140P EMC - CB Certificate ▷ View online
Page 73 of 75
TP10110019-ST
IEC/EN 60065
Clause
Requirement – Test
Result - Remark
Verdict
TRF No.: IECEN60065G
14 (cont.)
TABLE: list of critical components and materials
P
Component
Manufacturer/
trademark
trademark
Type/model
Value/rating
Standard
Approval/
reference
reference
1)
Varnish (T1)
Hang Cheung
8562C
155°C
Applicable parts
of IEC 60065, UL
94
UL recognized
Bobbin (T2),
(For F02801610
only)
Chang Chun
T375J
V-0, 150
°
C
Applicable parts
of IEC 60065,
UL 94
UL recognized
Insulation Tape
(T2), (For
F02801610 only)
Chyun Yih
P2XXF(b)
130
°
C
Applicable parts
of IEC 60065,
UL 94
UL recognized
Margin Tape
(T2), (For
F02801610 only)
Chyun Yih
P 244F 1(a)
130
°
C, 3.0 mm
wide minimum
Applicable parts
of IEC 60065,
UL 94
UL recognized
Insulating Tube
(T2), (For
F02801610 only)
Fluo Tech
TFL
150Vac, Max.
200
°
C
IEC 60065
applicable part
Tested in
appliance
Varnish (T2),
(For F02801610
only)
Elantas
V1630,
V1630FS
130°C
Applicable parts
of IEC 60065, UL
94
UL recognized
Bobbin (T2),
(For NT1810NL
only)
Chang Chun
T375J
V-0, 150
°
C
Applicable parts
of IEC 60065,
UL 94
UL recognized
Insulation Tape
(T2), (For
NT1810NL only)
Jingjiang Yahua
CT
130
°
C
Applicable parts
of IEC 60065,
UL 94
UL recognized
Alt.
(For NT1810NL
only)
Suzhou
Mailaduona
JY312
130
°
C
Applicable parts
of IEC 60065,
UL 94
UL recognized
Margin Tape
(T2), (For
NT1810NL only)
Jingjiang Yahua WF
130
°
C, 3.0 mm
wide minimum
Applicable parts
of IEC 60065,
UL 94
UL recognized
Page 74 of 75
TP10110019-ST
IEC/EN 60065
Clause
Requirement – Test
Result - Remark
Verdict
TRF No.: IECEN60065G
14 (cont.)
TABLE: list of critical components and materials
P
Component
Manufacturer/
trademark
trademark
Type/model
Value/rating
Standard
Approval/
reference
reference
1)
Insulating Tube
(T2), (For
NT1810NL only)
Changyuan
CB-TT-S
600Vac, Max.
200
°
C
IEC 60065
applicable part
Tested in
appliance
Alt. (For
NT1810NL only)
Shenzhen Woer
WF
600Vac, Max.
200
°
C
IEC 60065
applicable part
Tested in
appliance
Varnish (T2)
(For NT1810NL
only)
Hang Cheung
8562C
155°C
Applicable parts
of IEC 60065, UL
94
UL recognized
Bobbin (DT1)
Chang Chun
T375J
V-0, 150
°
C
Applicable parts
of IEC 60065,
UL 94
UL recognized
Insulation Tape
(DT1)
Jingjiang Yahua
CT
130
°
C
Applicable parts
of IEC 60065,
UL 94
UL recognized
Alt.
Suzhou
Mailaduona
JY312
130
°
C
Applicable parts
of IEC 60065,
UL 94
UL recognized
Margin Tape
(DT1)
Jingjiang Yahua WF
130
°
C, 3.0 mm
wide minimum
Applicable parts
of IEC 60065,
UL 94
UL recognized
Insulating Tube
(DT1)
Changyuan
CB-TT-S
600Vac, Max.
200
°
C
IEC 60065
applicable part
Tested in
appliance
Alt.
Shenzhen Woer
WF
600Vac, Max.
200
°
C
IEC 60065
applicable part
Tested in
appliance
Varnish (DT1)
Hang Cheung
8562C
155°C
Applicable parts
of IEC 60065, UL
94
UL recognized
Note:
1) An asterisk indicates a mark which assures the agreed level of surveillance.
2) All the plastic material mentioned are checked and found to be acceptable for using in this product.
Checking date: Same as this report issued data, see also page 1.
Page 75 of 75
TP10010160-ST
IEC 60825-1 / EN 60825-1
Clause
Requirement – Test
Result - Remark
Verdict
Remarks
1. This report is submitted for the exclusive use of the client to whom it is addressed. Its
significance is subject to the adequacy and representative character of the sample(s) and to
the comprehensiveness of the tests, examinations or surveys made.
the comprehensiveness of the tests, examinations or surveys made.
2. The CE marking may only be used if all relevant and effective EC directives are complied
with.
3. The instruction specified by the standard has to be in official language of each country,
however, only English is checked for this report. It is the applicant’s responsibility to provide
instruction in each official language of the EU.
instruction in each official language of the EU.
Appendix No.1
Page 1 of 1
TP10110019-ST
Important Safety Instructions
1. No naked flame sources, such as lighted candles, should be placed on the apparatus.
2. The apparatus shall not be exposed to dripping or splashing and that no objects filled with liquids,
such as vases, shall be placed on the apparatus.
3. Where the MAINS plug is used as the disconnect device, the disconnect device shall remain
readily operable.
4. The apparatus shall be connected to a MAINS socket outlet with a protective earthing connection.
5. The apparatus should be used in tropical and/or moderate climates.
Click on the first or last page to see other SUB 140P service manuals if exist.