JBL SPOT (serv.man2) EMC - CB Certificate ▷ View online
Page 4 of 58
Report No.:
11008507 001
TRF No.:IECEN60950_1B
TRF originator: SGS Fimko
General product information:
The equipment is a Computer stereo system for use with information technology equipment.
The equipment is powered by an external power adaptor, which is complied with the limited power source,
see table 1.5.1 for source information.
see table 1.5.1 for source information.
This report contains all national deviation as the class III equipment itself, which is subject of this CB report,
but CB countries for external power adapter should investigate this matter while the equipment under test is
submitted for national approval.
but CB countries for external power adapter should investigate this matter while the equipment under test is
submitted for national approval.
Page 5 of 58
Report No.:
11008507 001
TRF No.:IECEN60950_1B
TRF originator: SGS Fimko
IEC 60950-1 / EN 60950-1
Clause
Requirement – Test
Result – Remark
Verdict
1
GENERAL
P
1.5
Components
P
1.5.1
General
See below.
P
Comply with IEC 60950 or relevant component
standard
standard
(see appended table 1.5.1)
P
1.5.2
Evaluation and testing of components
Components which are certified
to IEC/EN and/or national
standards are used correctly
within their ratings. For sources
of adaptor mentioned in page 3
of this report, the evaluation is
conducted together with this
unit. Components not covered
by IEC/EN standards are tested
under the conditions present in
the equipment.
to IEC/EN and/or national
standards are used correctly
within their ratings. For sources
of adaptor mentioned in page 3
of this report, the evaluation is
conducted together with this
unit. Components not covered
by IEC/EN standards are tested
under the conditions present in
the equipment.
P
1.5.3
Thermal controls
No thermal controls.
N/A
1.5.4
Transformers
No transformers.
N/A
1.5.5
Interconnecting cables
Interconnecting cables are
carrying only SELV on an energy
level below 240VA.
carrying only SELV on an energy
level below 240VA.
P
1.5.6
Capacitors in primary circuits .............................. : No direct mains connection.
N/A
1.5.7
Double insulation or reinforced insulation bridged
by components
by components
N/A
1.5.7.1
General
N/A
1.5.7.2
Bridging capacitors
N/A
1.5.7.3
Bridging resistors
N/A
1.5.7.4
Accessible parts
N/A
1.5.8
Components in equipment for IT power systems
No direct mains connection.
N/A
1.6
Power interface
P
1.6.1
AC power distribution systems
Equipment is not directly
connected to the AC mains
supply.
connected to the AC mains
supply.
N/A
1.6.2
Input current
Highest load according to
1.2.2.1 for this equipment is
connected to audio source and
the speakers at maximum
volume.
1.2.2.1 for this equipment is
connected to audio source and
the speakers at maximum
volume.
(see appended table 1.6.2)
P
Page 6 of 58
Report No.:
11008507 001
TRF No.:IECEN60950_1B
TRF originator: SGS Fimko
IEC 60950-1 / EN 60950-1
Clause
Requirement – Test
Result – Remark
Verdict
1.6.3
Voltage limit of hand-held equipment
This appliance is not a hand-
held equipment.
held equipment.
N/A
1.6.4
Neutral conductor
Equipment is not directly
connected to the AC mains
supply.
connected to the AC mains
supply.
N/A
1.7
Marking and instructions
P
1.7.1
Power rating
See below.
P
Rated voltage(s) or voltage range(s) (V) ............ : 18V
(no direct connection to the AC
mains supply)
mains supply)
N/A
Symbol for nature of supply, for d.c. only ............ : d.c. symbol provided. (three
dashes under a line)
P
Rated frequency or rated frequency range (Hz) . : (no direct connection to the AC
mains supply)
N/A
Rated current (mA or A) ..................................... : 2.5A
(no direct connection to the AC
mains supply)
mains supply)
N/A
Manufacturer’s name or trademark or identification
mark .................................................................... :
mark .................................................................... :
P
Type/model or type reference.............................. : jbl spot
P
Symbol for Class II equipment only .................... : Class III equipment.
P
Other symbols ..................................................... : Additional symbols or marking
do not give rise to
misunderstanding.
misunderstanding.
P
Certification marks .............................................. : TÜV GS-mark provided. Other
see copy of marking plate.
N/A
1.7.2
Safety instructions
Safety instructions are provided
in user’s manual.
in user’s manual.
P
1.7.3
Short duty cycles
Equipment is designed for
continuous operation.
continuous operation.
N/A
1.7.4
Supply voltage adjustment .................................. : No voltage/frequency setting.
N/A
Methods and means of adjustment; reference to
installation instructions ........................................ :
installation instructions ........................................ :
N/A
1.7.5
Power outlets on the equipment ......................... : No power outlets provided.
N/A
1.7.6
Fuse identification (marking, special fusing
characteristics, cross-reference) ........................ :
characteristics, cross-reference) ........................ :
No fuses.
N/A
1.7.7
Wiring terminals
See below.
N/A
1.7.7.1
Protective earthing and bonding terminals ......... : No direct connection to mains
supply.
N/A
Page 7 of 58
Report No.:
11008507 001
TRF No.:IECEN60950_1B
TRF originator: SGS Fimko
IEC 60950-1 / EN 60950-1
Clause
Requirement – Test
Result – Remark
Verdict
1.7.7.2
Terminal for a.c. mains supply conductors
No direct connection to mains
supply.
supply.
N/A
1.7.7.3
Terminals for d.c. mains supply conductors
No direct connection to mains
supply.
supply.
N/A
1.7.8
Controls and indicators
No safety related controls and
indicators.
indicators.
N/A
1.7.8.1
Identification, location and marking .................... :
N/A
1.7.8.2
Colours .............................................................. :
N/A
1.7.8.3
Symbols according to IEC 60417 ........................ :
N/A
1.7.8.4
Markings using figures ....................................... :
N/A
1.7.9
Isolation of multiple power sources .................... : No direct mains connection.
N/A
1.7.10
IT power distribution systems
No direct mains connection.
N/A
1.7.11
Thermostats and other regulating devices
No thermostats provided.
N/A
1.7.12
Language(s) ........................................................ :
Marking label is in English,
user’s manual is in English and
German.
user’s manual is in English and
German.
Versions in other languages
have to be provided during the
corresponding national
approvals.
have to be provided during the
corresponding national
approvals.
1.7.13
Durability
The label was subjected to the
permanence of marking test.
The label was rubbed with cloth
soaked with water for 15 s and
then again for 15 s with the
cloth soaked with petroleum
spirit.
permanence of marking test.
The label was rubbed with cloth
soaked with water for 15 s and
then again for 15 s with the
cloth soaked with petroleum
spirit.
After this test there was no
damage to the label. The
marking on the label did not
fade. There was no curling nor
lifting of the label edge.
damage to the label. The
marking on the label did not
fade. There was no curling nor
lifting of the label edge.
P
1.7.14
Removable parts
No removable parts.
P
1.7.15
Replaceable batteries
No batteries.
N/A
Language(s)......................................................... :
1.7.16
Operator access with a tool ................................. : No operator accessible area
that needs to be accessed by
the use of a tool.
the use of a tool.
N/A
1.7.17
Equipment for restricted access locations ........... : Not limited for use in restricted
access locations.
N/A
Click on the first or last page to see other SPOT (serv.man2) service manuals if exist.