JBL SPOT (serv.man2) EMC - CB Certificate ▷ View online
Page 12 of 58
Report No.:
11008507 001
TRF No.:IECEN60950_1B
TRF originator: SGS Fimko
IEC 60950-1 / EN 60950-1
Clause
Requirement – Test
Result – Remark
Verdict
2.10.3.2
Clearances in primary circuits
N/A
2.10.3.3
Clearances in secondary circuits
N/A
2.10.3.4
Measurement of transient voltage levels
N/A
2.10.4
Creepage distances
N/A
CTI tests .............................................................. :
2.10.5
Solid insulation
N/A
2.10.5.1
Minimum distance through insulation
N/A
2.10.5.2
Thin sheet material
N/A
Number of layers (pcs) ........................................ :
Electric strength test
2.10.5.3
Printed boards
N/A
Distance through insulation
N/A
Electric strength test for thin sheet insulating
material
material
Number of layers (pcs) ........................................ :
N/A
2.10.5.4
Wound components
N/A
Number of layers (pcs) ........................................ :
N/A
Two wires in contact inside wound component;
angle between 45° and 90° ................................. :
angle between 45° and 90° ................................. :
N/A
2.10.6
Coated printed boards
N/A
2.10.6.1
General
N/A
2.10.6.2
Sample preparation and preliminary inspection
N/A
2.10.6.3
Thermal cycling
N/A
2.10.6.4
Thermal ageing (°C) ............................................ :
N/A
2.10.6.5
Electric strength test
2.10.6.6
Abrasion resistance test
N/A
Electric strength test
2.10.7
Enclosed and sealed parts .................................. :
N/A
Temperature T1=T2 + Tma – Tamb +10K (°C)... :
N/A
2.10.8
Spacings filled by insulating compound............... :
N/A
Electric strength test
2.10.9
Component external terminations
N/A
2.10.10
Insulation with varying dimensions
N/A
3
WIRING, CONNECTIONS AND SUPPLY
P
Page 13 of 58
Report No.:
11008507 001
TRF No.:IECEN60950_1B
TRF originator: SGS Fimko
IEC 60950-1 / EN 60950-1
Clause
Requirement – Test
Result – Remark
Verdict
3.1
General
P
3.1.1
Current rating and overcurrent protection
P
3.1.2
Protection against mechanical damage
Wires do not touch sharp
edges, which could damage
the insulation and cause
hazard.
edges, which could damage
the insulation and cause
hazard.
P
3.1.3
Securing of internal wiring
P
3.1.4
Insulation of conductors
The insulation of the individual
conductors is suitable for the
application and the working
voltage. For the insulation
material see 3.1.1.
conductors is suitable for the
application and the working
voltage. For the insulation
material see 3.1.1.
P
3.1.5
Beads and ceramic insulators
N/A
3.1.6
Screws for electrical contact pressure
N/A
3.1.7
Insulating materials in electrical connections
N/A
3.1.8
Self-tapping and spaced thread screws
N/A
3.1.9
Termination of conductors
P
10 N pull test
Complied.
P
3.1.10
Sleeving on wiring
No sleeving used.
N/A
3.2
Connection to an a.c. mains supply or a d.c. mains supply
N/A
3.2.1
Means of connection ........................................... :
N/A
3.2.1.1
Connection to an a.c. mains supply
N/A
3.2.1.2
Connection to a d.c. mains supply
N/A
3.2.2
Multiple supply connections
N/A
3.2.3
Permanently connected equipment
N/A
Number of conductors, diameter (mm) of cable
and conduits ....................................................... :
and conduits ....................................................... :
3.2.4
Appliance inlets
N/A
3.2.5
Power supply cords
N/A
3.2.5.1
AC power supply cords
N/A
Type ..................................................................... :
Page 14 of 58
Report No.:
11008507 001
TRF No.:IECEN60950_1B
TRF originator: SGS Fimko
IEC 60950-1 / EN 60950-1
Clause
Requirement – Test
Result – Remark
Verdict
Rated current (A), cross-sectional area (mm
2
),
AWG .................................................................... :
3.2.5.2
DC power supply cords
N/A
3.2.6
Cord anchorages and strain relief
N/A
Mass of equipment (kg), pull (N) ....................... :
Longitudinal displacement (mm) ......................... :
3.2.7
Protection against mechanical damage
N/A
3.2.8
Cord guards
N/A
D (mm); test mass (g) ......................................... :
Radius of curvature of cord (mm)........................ :
3.2.9
Supply wiring space
N/A
3.3
Wiring terminals for connection of external conductors
N/A
3.3.1
Wiring terminals
N/A
3.3.2
Connection of non-detachable power supply
cords
cords
N/A
3.3.3
Screw terminals
N/A
3.3.4
Conductor sizes to be connected
N/A
Rated current (A), cord/cable type, cross-sectional
area (mm
area (mm
2
)........................................................... :
3.3.5
Wiring terminal sizes
N/A
Rated current (A), type and nominal thread
diameter (mm) .................................................... :
diameter (mm) .................................................... :
3.3.6
Wiring terminals design
N/A
3.3.7
Grouping of wiring terminals
N/A
3.3.8
Stranded wire
N/A
3.4
Disconnection from the mains supply
N/A
3.4.1
General requirement
N/A
3.4.2
Disconnect devices
N/A
3.4.3
Permanently connected equipment
N/A
3.4.4
Parts which remain energized
N/A
3.4.5
Switches in flexible cords
N/A
3.4.6
Single-phase equipment and d.c. equipment
N/A
3.4.7
Three-phase equipment
N/A
3.4.8
Switches as disconnect devices
N/A
Page 15 of 58
Report No.:
11008507 001
TRF No.:IECEN60950_1B
TRF originator: SGS Fimko
IEC 60950-1 / EN 60950-1
Clause
Requirement – Test
Result – Remark
Verdict
3.4.9
Plugs as disconnect devices
N/A
3.4.10
Interconnected equipment
N/A
3.4.11
Multiple power sources
N/A
3.5
Interconnection of equipment
P
3.5.1
General requirements
See below.
P
3.5.2
Types of interconnection circuits ......................... : Interconnection circuits of
SELV through the connectors.
P
3.5.3
ELV circuits as interconnection circuits
No ELV interconnection.
N/A
4
PHYSICAL REQUIREMENTS
P
4.1
Stability
P
Angle of 10°
This appliance does not
overbalance when tilted to an
angle of 10° from its normal
upright position.
overbalance when tilted to an
angle of 10° from its normal
upright position.
P
Test: force (N).....................................................:
Equipment is not a
floorstanding unit.
floorstanding unit.
N/A
4.2
Mechanical strength
No hazardous voltages present in the unit or other hazards foreseeable.
No hazardous voltages present in the unit or other hazards foreseeable.
N/A
4.2.1
General
N/A
4.2.2
Steady force test, 10 N
N/A
4.2.3
Steady force test, 30 N
N/A
4.2.4
Steady force test, 250 N
N/A
4.2.5
Impact test
N/A
Fall test
N/A
Swing test
N/A
4.2.6
Drop test
N/A
4.2.7
Stress relief test
N/A
4.2.8
Cathode ray tubes
N/A
Picture tube separately certified .......................... :
N/A
4.2.9
High pressure lamps
N/A
4.2.10
Wall or ceiling mounted equipment; force (N) .... :
N/A
4.3
Design and construction
P
Click on the first or last page to see other SPOT (serv.man2) service manuals if exist.