JBL SPOT (serv.man2) EMC - CB Certificate ▷ View online
Page 36 of 58
Report No.:
11008507 001
TRF No.:IECEN60950_1B
TRF originator: SGS Fimko
IEC 60950-1 / EN 60950-1
Clause
Requirement – Test
Result – Remark
Verdict
ISO 261:1998
ISO 262:1998
EN ISO 527 Series
ISO 527 Series
ISO 386:1984
EN ISO 4892 Series
ISO 4892 Series
ISO 7000:1989
EN ISO 8256:1996
ISO 8256:1990
ISO 9772:1994
EN ISO 9773:1998
ISO 9773:1998
ITU-T:1988 Recommendation K.17
ITU-T:2000 Recommendation K.21
1) The HD 21 series is related to, but not directly equivalent with the IEC 60227 series
2) The HD 22 series is related to, but not directly equivalent with the IEC 60245 series
3) IEC 60364-4-41:1992 is superseded by IEC 60364-4-41:2001
4) EN 132400, Sectional Specification: Fixed capacitors for electromagnetic interference suppression
and connection to the supply mains (Assessment level D), and its amendments are related to, but not
directly equivalent to IEC 60384-14
2) The HD 22 series is related to, but not directly equivalent with the IEC 60245 series
3) IEC 60364-4-41:1992 is superseded by IEC 60364-4-41:2001
4) EN 132400, Sectional Specification: Fixed capacitors for electromagnetic interference suppression
and connection to the supply mains (Assessment level D), and its amendments are related to, but not
directly equivalent to IEC 60384-14
Page 37 of 58
Report No.:
11008507 001
TRF No.:IECEN60950_1B
TRF originator: SGS Fimko
1.5.1
TABLE: list of critical components
P
Object/part no.
Manufacturer/
trademark
trademark
Type/model
Technical data
Standard
Mark(s) of
conformity
conformity
1.
Power Adaptor
Kuantech
(Shenzhen) Co.,
Ltd.
(Shenzhen) Co.,
Ltd.
KSAFH1800250
T1M2
T1M2
Input: 100-240Vac,
50/60Hz, 1.2A;
Output: 18Vdc,
2.5A, 25°C, LPS,
Class II
50/60Hz, 1.2A;
Output: 18Vdc,
2.5A, 25°C, LPS,
Class II
EN 60950-1
/A11: 2004
/A11: 2004
TÜV, CB (by
TÜV PS)
TÜV PS)
PCB material
--
--
Min. V-1, 105°C
UL 94
UL
Plastic enclosure --
--
Min. HB
UL 94
UL
Satellite speaker
(two provided)
(two provided)
--
--
4Ω, 3W
--
--
Subwoofer
--
--
5Ω, 30W
--
--
Note(s):
1. An asterisk indicates a mark that assures the agreed level of surveillance.
1.6.2
TABLE: electrical data (in normal conditions)
P
Fuse # Irated (A)
U (V)
P (W)
I (A)
Ifuse (A)
Condition/status
--
2.5
DC 18
10.26
0.57
--
Max. normal load condition
Note(s):
2.1.1.5
TABLE: max. V, A, VA test
N/A
Voltage (rated)
(V)
Current (rated)
(A)
Voltage (max.)
(V)
Current (max.)
(A)
VA (max.)
(VA)
Note(s):
2.1.1.7
TABLE: discharge test
N/A
Condition
τ
calculated
(s)
τ
measured
(s)
t u→ 0V
(s)
Comments
Note(s):
Page 38 of 58
Report No.:
11008507 001
TRF No.:IECEN60950_1B
TRF originator: SGS Fimko
2.2.2
TABLE: Hazardous voltage measurement
N/A
max. Voltage
Transformer
Location
V peak
V d.c.
Voltage Limitation
Component
Component
Note(s):
2.2.3
TABLE: SEL voltage measurement
N/A
Location
Voltage measured (V)
Comments
Note(s):
2.4.2
TABLE: limited current circuit measurement
N/A
Location
Voltage
(V)
Current
(mA)
Freq.
(kHz)
(kHz)
Limit
(mA)
Comments
Note(s):
2.5
TABLE: limited power source measurement
N/A
Limits
Measured
Verdict
According to Table 2B/2C (normal condition)
current (in A)
apparent power (in VA)
According to Table 2B/2C (single fault condition)
current (in A)
apparent power (in VA)
Note(s):
2.6.3.4
TABLE: ground continue test
N/A
Location
Resistance measured (mΩ) Comments
Note(s):
Page 39 of 58
Report No.:
11008507 001
TRF No.:IECEN60950_1B
TRF originator: SGS Fimko
2.10.2
Table: working voltage measurement
N/A
Location
RMS voltage (V)
Peak voltage (V) Comments
Note(s):
2.10.3 and
2.10.4
2.10.4
TABLE: clearance and creepage distance measurements
N/A
Clearance cl and creepage
distance dcr at/of:
distance dcr at/of:
U p
(V)
U r.m.s.
(V)
Required
cl (mm)
cl
(mm)
Required
dcr (mm)
dcr (mm)
dcr
(mm)
Note(s):
2.10.5
TABLE: distance through insulation measurements
N/A
Distance through insulation di at/of:
U r.m.s.
(V)
Test voltage
(V)
Required di
(mm)
di
(mm)
Note(s):
4.5.1
TABLE: maximum temperatures
P
test voltage (V) .............................................: DC 18
t1 (°C) ..........................................................: --
t2 (°C) ..........................................................: --
Maximum temperature T of part/at:
T (°C)
allowed T
max
(°C)
C100 body
51.8
85
PCB near U17 heatsink
64.4
105
C78 body
36.3
85
PCB near U16
49.2
105
Enclosure inside near U17 heatsink
43.9
--
Enclosure outside near U17 heatsink
34.2
95
Ambient
25
--
Temperature T of winding:
R
1
(Ω)
R
2
(Ω)
T
(°C)
allowed
T
max
(°C)
insulation
class
Click on the first or last page to see other SPOT (serv.man2) service manuals if exist.