JBL PULSE (serv.man6) EMC - CB Certificate ▷ View online
Page 13 of 51
Report No. 241619
IEC
60950-1
Clause
Requirement + Test
Result - Remark
Verdict
TRF No. IEC60950_1C
1.5.9
Surge suppressors
No such component used
N/A
1.5.9.1 General
N/A
1.5.9.2
Protection of VDRs
N/A
1.5.9.3
Bridging of functional insulation by a VDR
N/A
1.5.9.4
Bridging of basic insulation by a VDR
N/A
1.5.9.5
Bridging of supplementary, double or reinforced
insulation by a VDR
insulation by a VDR
N/A
1.6 Power
interface
P
1.6.1
AC power distribution systems
The equipment is regarded as
Class III.
Class III.
N/A
1.6.2 Input
current
(see appended table 1.6.2)
P
1.6.3
Voltage limit of hand-held equipment
The equipment is not hand-
held.
held.
N/A
1.6.4
Neutral conductor
The equipment is regarded as
Class III.
Class III.
N/A
1.7
Marking and instructions
P
1.7.1
Power rating and identification markings
The required marking is
located on the outside surface
of the equipment.
located on the outside surface
of the equipment.
P
1.7.1.1
Power rating marking
See below
P
Multiple mains supply connections..........................: Class III equipment.
N/A
Rated voltage(s) or voltage range(s) (V) .............. : 5V DC
P
Symbol for nature of supply, for d.c. only .............. : IEC 60417-1, symbol No.
5031, is used.
P
Rated frequency or rated frequency range (Hz) ... : DC supplied.
N/A
Rated current (mA or A) ........................................ : 2.3A
—
1.7.1.2
Identification markings
See below.
P
Manufacturer’s name or trade-mark or identification
mark ...................................................................... :
mark ...................................................................... :
See page 2
P
Model identification or type reference ................... : See page 2
—
Symbol for Class II equipment only ...................... : Class III equipment
N/A
Other markings and symbols ................................ : The additional marking does
not give rise to
misunderstandings.
misunderstandings.
P
Page 14 of 51
Report No. 241619
IEC
60950-1
Clause
Requirement + Test
Result - Remark
Verdict
TRF No. IEC60950_1C
1.7.2
Safety instructions and marking
The user’s manual contains
information for operation,
installation, servicing,
transport, storage, technical
data and battery show in the
user manual. No other special
installation instruction
required as the equipment is
class III.
information for operation,
installation, servicing,
transport, storage, technical
data and battery show in the
user manual. No other special
installation instruction
required as the equipment is
class III.
P
1.7.2.1 General
Considered.
—
1.7.2.2
Disconnect devices
Class III equipment.
N/A
1.7.2.3 Overcurrent
protective device
Class III equipment.
N/A
1.7.2.4
IT power distribution systems
Class III equipment.
N/A
1.7.2.5
Operator access with a tool
All areas containing hazard(s)
are inaccessible to the
operator.
are inaccessible to the
operator.
P
1.7.2.6
Ozone
The equipment does not
produce Ozone.
produce Ozone.
N/A
1.7.3
Short duty cycles
The equipment is intended for
continuous operation.
continuous operation.
N/A
1.7.4
Supply voltage adjustment ................................... : No voltage select switch.
N/A
Methods and means of adjustment; reference to
installation instructions ......................................... :
installation instructions ......................................... :
—
1.7.5
Power outlets on the equipment .......................... : No standard power outlet.
N/A
1.7.6
Fuse identification (marking, special fusing
characteristics, cross-reference) .......................... :
characteristics, cross-reference) .......................... :
Class III equipment.
N/A
1.7.7
Wiring terminals
Class III equipment.
—
1.7.7.1 Protective
earthing
and bonding terminals .......... :
N/A
1.7.7.2
Terminals for a.c. mains supply conductors
N/A
1.7.7.3
Terminals for d.c. mains supply conductors
N/A
1.7.8
Controls and indicators
Refer below.
—
1.7.8.1
Identification, location and marking ..................... : The function of controls
affecting safety is obvious
without knowledge of
language etc.
without knowledge of
language etc.
P
1.7.8.2 Colours
................................................................ :
N/A
1.7.8.3
Symbols according to IEC 60417 ........................ :
The functional switch is
marked with the symbols:
"
marked with the symbols:
"
" (IEC 60417-1 No.
5010).
P
Page 15 of 51
Report No. 241619
IEC
60950-1
Clause
Requirement + Test
Result - Remark
Verdict
TRF No. IEC60950_1C
1.7.8.4
Markings using figures ....................................... :
No controls.
N/A
1.7.9
Isolation of multiple power sources ..................... :
Class III equipment. N/A
1.7.10
Thermostats and other regulating devices .......... :
No thermostats or other
regulating devices.
regulating devices.
N/A
1.7.11
Durability
The marking withstands
required tests.
required tests.
P
1.7.12
Removable parts
No removable part.
N/A
1.7.13 Replaceable
batteries ......................................... :
The Li-ion battery pack is not
user replaceable.
user replaceable.
N/A
Language(s)
........................................................ :
English
—
1.7.14
Equipment for restricted access locations ........... :
Equipment not intended for
installation in RAL.
installation in RAL.
N/A
2
PROTECTION FROM HAZARDS
P
2.1
Protection from electric shock and energy hazards
—
2.1.1
Protection in operator access areas
Refer below:
—
2.1.1.1
Access to energized parts
Energized parts are not
accessible.
accessible.
N/A
Test by inspection ................................................. :
N/A
Test with test finger (Figure 2A) ............................ :
N/A
Test with test pin (Figure 2B) ................................ :
N/A
Test with test probe (Figure 2C) ........................... : No TNV circuit in the
equipment.
N/A
2.1.1.2
Battery compartments
No TNV circuits in the
equipment.
equipment.
N/A
2.1.1.3
Access to ELV wiring
The equipment is regarded as
class III.
class III.
N/A
Working voltage (Vpeak or Vrms); minimum
distance through insulation (mm)
distance through insulation (mm)
—
2.1.1.4
Access to hazardous voltage circuit wiring
The equipment is regarded as
class III.
class III.
N/A
2.1.1.5 Energy
hazards ................................................. :
No energy hazard in operator
access area. Checked by
means of the test finger.
access area. Checked by
means of the test finger.
P
2.1.1.6 Manual
controls
No
shafts of knobs etc.
N/A
2.1.1.7
Discharge of capacitors in equipment
The equipment is regarded as
class III.
class III.
N/A
Measured voltage (V); time-constant (s) ............ :
—
Page 16 of 51
Report No. 241619
IEC
60950-1
Clause
Requirement + Test
Result - Remark
Verdict
TRF No. IEC60950_1C
2.1.1.8
Energy hazards – d.c. mains supply
Not connected to DC mains
supply.
supply.
N/A
a) Capacitor connected to the d.c. mains supply .. :
N/A
N/A
2.1.1.9 Audio
amplifiers ................................................. :
The accessible audio terminal
complies with 2.1.1.1.
complies with 2.1.1.1.
P
2.1.2
Protection in service access areas
Checked by inspection
unintentional contact is
unlikely during service
operations.
unintentional contact is
unlikely during service
operations.
P
2.1.3
Protection in restricted access locations
Equipment not intended for
installation in RAL.
installation in RAL.
N/A
2.2 SELV
circuits
N/A
2.2.1
General requirements
Class III equipment.
N/A
2.2.2
Voltages under normal conditions (V) ................... :
N/A
2.2.3
Voltages under fault conditions (V) ....................... :
N/A
2.2.4
Connection of SELV circuits to other circuits ...... :
N/A
2.3 TNV
circuits
N/A
2.3.1
Limits
No TNV circuits.
N/A
Type of TNV circuits ............................................... :
2.3.2
Separation from other circuits and from accessible
parts
parts
N/A
2.3.2.1 General
requirements
N/A
2.3.2.2
Protection by basic insulation
N/A
2.3.2.3
Protection by earthing
N/A
2.3.2.4
Protection by other constructions ......................... :
N/A
2.3.3
Separation from hazardous voltages
N/A
Insulation
employed ............................................... :
2.3.4
Connection of TNV circuits to other circuits
N/A
Insulation
employed ............................................... :
2.3.5
Test for operating voltages generated externally
N/A
2.4
Limited current circuits
N/A
Click on the first or last page to see other PULSE (serv.man6) service manuals if exist.