JBL DUET II (serv.man7) EMC - CB Certificate ▷ View online
- Page 17 of 51 -
www.nemko.com
Report No. 114383
TRF No.:IECEN60950_1B
IEC 60950-1 / EN 60950-1
Clause
Requirement – Test
Result – Remark
Verdict
Number of conductors, diameter (mm) of cable
and conduits .......................................................:
and conduits .......................................................:
—
3.2.4 Appliance
inlets
N/A
3.2.5
Power supply cords
—
3.2.5.1
AC power supply cords
N/A
Type.....................................................................:
—
Rated current (A), cross-sectional area (mm
2
),
AWG ................................................................... :
—
3.2.5.2
DC power supply cords
N/A
3.2.6
Cord anchorages and strain relief
N/A
Mass of equipment (kg), pull (N) ...................... :
—
Longitudinal
displacement (mm) ....................... :
—
3.2.7
Protection against mechanical damage
N/A
3.2.8 Cord
guards
N/A
D (mm); test mass (g) ........................................ :
—
Radius of curvature of cord (mm)....................... :
—
3.2.9
Supply wiring space
N/A
3.3
Wiring terminals for connection of external conductors
—
3.3.1
Wiring terminals
Class III equipment. Unit is not
intended for direct connection
to a mains supply.
intended for direct connection
to a mains supply.
N/A
3.3.2
Connection of non-detachable power supply
cords
cords
N/A
3.3.3 Screw
terminals
N/A
3.3.4
Conductor sizes to be connected
N/A
Rated current (A), cord/cable type, cross-
sectional area (mm
sectional area (mm
2
) ...........................................:
—
3.3.5
Wiring terminal sizes
N/A
Rated current (A), type and nominal thread
diameter (mm) ....................................................:
diameter (mm) ....................................................:
—
3.3.6
Wiring terminal design
N/A
3.3.7
Grouping of wiring terminals
N/A
3.3.8 Stranded
wire
N/A
3.4
Disconnection from the mains supply
—
- Page 18 of 51 -
www.nemko.com
Report No. 114383
TRF No.:IECEN60950_1B
IEC 60950-1 / EN 60950-1
Clause
Requirement – Test
Result – Remark
Verdict
3.4.1
General requirement
Class III equipment. Unit is not
intended for direct connection
to a mains supply.
intended for direct connection
to a mains supply.
N/A
3.4.2 Disconnect
devices
N/A
3.4.3
Permanently connected equipment
N/A
3.4.4
Parts which remain energized
N/A
3.4.5
Switches in flexible cords
N/A
3.4.6 Single-phase
equipment
and d.c. equipment
N/A
3.4.7 Three-phase
equipment
N/A
3.4.8
Switches as disconnect devices
N/A
3.4.9
Plugs as disconnect devices
N/A
3.4.10 Interconnected
equipment
N/A
3.4.11
Multiple power sources
N/A
3.5
Interconnection of equipment
—
3.5.1 General
requirements
Considered.
—
3.5.2
Types of interconnection circuits ..........................: SELV circuit.
P
3.5.3
ELV circuits as interconnection circuits
No ELV.
N/A
4 PHYSICAL
REQUIREMENTS
—
4.1 Stability
P
Angle of 10
°
Unit does not overbalance at
10°.
10°.
P
Test: force (N).......................................................: The unit is not floor-standing.
N/A
4.2 Mechanical
strength
—
4.2.1
General
Class III equipment.
N/A
4.2.2
Steady force test, 10 N
N/A
4.2.3
Steady force test, 30 N
N/A
4.2.4
Steady force test, 250 N
N/A
4.2.5 Impact
test
—
Fall
test
N/A
Swing
test
N/A
4.2.6 Drop
test
N/A
4.2.7
Stress relief test
N/A
- Page 19 of 51 -
www.nemko.com
Report No. 114383
TRF No.:IECEN60950_1B
IEC 60950-1 / EN 60950-1
Clause
Requirement – Test
Result – Remark
Verdict
4.2.8
Cathode ray tubes
CRT(s) not used in the
equipment.
equipment.
N/A
Picture tube separately certified ......................... :
N/A
4.2.9
High pressure lamps
No high pressure lamps in the
equipment.
equipment.
N/A
4.2.10
Wall or ceiling mounted equipment; force (N) ... : Not intended to be mounted on
a wall or ceiling.
N/A
4.3
Design and construction
—
4.3.1
Edges and corners
All edges and corners are
rounded and/or smoothed.
rounded and/or smoothed.
P
4.3.2
Handles and manual controls; force (N)............. : No knobs, grips, handles,
levers will result in any hazard.
P
4.3.3
Adjustable controls
No hazardous adjustable
controls.
controls.
N/A
4.3.4
Securing of parts
Class III equipment.
N/A
4.3.5
Connection of plugs and sockets
SELV connectors do not
comply with IEC 60320 or IEC
60083.
comply with IEC 60320 or IEC
60083.
P
4.3.6
Direct plug-in equipment
Not intended to plug directly
into a wall socket-outlet.
into a wall socket-outlet.
N/A
Dimensions (mm) of mains plug for direct plug-in
.............................................................................:
N/A
Torque and pull test of mains plug for direct
plug-in; torque (Nm); pull (N)...............................:
plug-in; torque (Nm); pull (N)...............................:
N/A
4.3.7
Heating elements in earthed equipment
No heating elements provided.
N/A
4.3.8
Batteries
No batteries in the equipment.
N/A
4.3.9
Oil and grease
Insulation is not exposed to oil,
grease etc.
grease etc.
N/A
4.3.10
Dust, powders, liquids and gases
The equipment does not
contain flammable liquids or
gases.
contain flammable liquids or
gases.
N/A
4.3.11
Containers for liquids or gases
No containers for liquids or
gases in the equipment.
gases in the equipment.
N/A
4.3.12 Flammable
liquids............................................... : The equipment does not
contain flammable liquid.
N/A
Quantity
of
liquid (l)............................................. :
N/A
Flash point (
°C)................................................... :
N/A
4.3.13
Radiation; type of radiation ................................ : Refer below:
—
- Page 20 of 51 -
www.nemko.com
Report No. 114383
TRF No.:IECEN60950_1B
IEC 60950-1 / EN 60950-1
Clause
Requirement – Test
Result – Remark
Verdict
4.3.13.1 General
Refer
below:
—
4.3.13.2 Ionizing
radiation
The equipment does not
generate ionizing radiation.
generate ionizing radiation.
N/A
Measured
radiation (pA/kg) .................................:
—
Measured
high-voltage (kV) ................................:
—
Measured
focus
voltage (kV) ...............................:
—
CRT
markings ......................................................:
—
4.3.13.3
Effect of ultraviolet (UV) radiation on materials
The equipment does not
produce significant UV
radiation.
produce significant UV
radiation.
N/A
Part, property, retention after test, flammability
classification ........................................................:
classification ........................................................:
N/A
4.3.13.4
Human exposure to ultraviolet (UV) radiation .....: The equipment does not
produce significant UV
radiation.
radiation.
N/A
4.3.13.5
Laser (including LEDs)
No laser product used.
N/A
Laser
class
..........................................................:
—
4.3.13.6 Other
types ..........................................................: The equipment does not
generate other types of
radiation.
radiation.
N/A
4.4
Protection against hazardous moving parts
—
4.4.1
General
No moving parts.
N/A
4.4.2
Protection in operator access areas
N/A
4.4.3
Protection in restricted access locations
N/A
4.4.4
Protection in service access areas
N/A
4.5 Thermal
requirements
—
4.5.1
Maximum temperatures
(see appended table 4.5)
P
Normal load condition per Annex L .....................:
Rated load with continuous
operation.
operation.
—
4.5.2
Resistance to abnormal heat
No thermoplastic parts carrying
hazardous voltages.
hazardous voltages.
N/A
4.6
Openings in enclosures
—
Click on the first or last page to see other DUET II (serv.man7) service manuals if exist.