JBL DUET II (serv.man7) EMC - CB Certificate ▷ View online
- Page 5 of 51 -
www.nemko.com
Report No. 114383
TRF No.:IECEN60950_1B
List of attachments:
Photos (6 pages)
Australian differences (8 pages)
Canadian differences (5 pages)
Australian differences (8 pages)
Canadian differences (5 pages)
Korean differences (1 page)
US differences (5 pages)
Israeli differences (1 page)
Singapore differences (3 pages)
Chinese differences (1 page)
Japanese differences (6 pages)
Chinese differences (1 page)
Japanese differences (6 pages)
PSU CB test report 12014166001 with CB certificate JPTUV-014962 from TUV Rheinland Japan Ltd.(73
pages)
pages)
- Page 6 of 51 -
www.nemko.com
Report No. 114383
TRF No.:IECEN60950_1B
Test items particulars
Equipment mobility ..................................... : Movable
Operating condition ..................................... : continuous
Equipment mobility ..................................... : Movable
Operating condition ..................................... : continuous
Normal operating condition: Supplied 1KHz sine wave for
speakers in computer speaker system and obtain 1/8
Maximum non-clipped output power
speakers in computer speaker system and obtain 1/8
Maximum non-clipped output power
Mains supply tolerance (%)......................... : N/A
Tested for IT power systems ...................... : No
IT testing, phase-phase voltage (V) :
Tested for IT power systems ...................... : No
IT testing, phase-phase voltage (V) :
N/A
Class of equipment ..................................... : Class III
Mass of equipment (kg)............................... : Weight: 0.82 kg
Mass of equipment (kg)............................... : Weight: 0.82 kg
Dimension: 264mm x 98 x 98mm
(the two have same size)
(the two have same size)
Protection against ingress of water ............ : IP20
Test case verdicts
Test case does not apply to the test object : N/A
Test item does meet the requirement ........ : P(ass)
Test item does not meet the requirement .. : F(ail)
Testing
Date of receipt of test item ......................... : November 2008
Date(s) of performance of test ................... : November 2008
General remarks
”This report is not valid as a CB Test Report unless appended by an approved CB Testing
Laboratory and appended to a CB Test Certificate issued by an NCB in accordance with IECEE 02”.
Laboratory and appended to a CB Test Certificate issued by an NCB in accordance with IECEE 02”.
The test result presented in this report relate only to the object(s) tested.
This report shall not be reproduced, except in full, without the written approval of the Issuing testing
laboratory.
This report shall not be reproduced, except in full, without the written approval of the Issuing testing
laboratory.
”(see attachment #)" refers to additional information appended to the report.
"(see appended table)" refers to a table appended to the report.
"(see appended table)" refers to a table appended to the report.
Throughout this report a point is used as the decimal separator.
- Page 7 of 51 -
www.nemko.com
Report No. 114383
TRF No.:IECEN60950_1B
General product information:
The equipment under tests is a Class III computer speaker system with two mains speakers of 4ohm
powered by a detachable Limited Power Source adaptor with a non-specialized type connector. The
adaptor model S024Ez1800120 / JBL is supplied with 0.6A 100-240V~ 50-60Hz and output 1200mA
18VDC. The external power supplied is approved by IEC 60950 with limited power source (Report No.
12014166 001 by TUV Rh) (refer to summary of testing). The computer speaker system is considered as
IT product.
Circuit characteristics: The equipment contains secondary (SELV).
Maximum recommended ambient (Tmra): 40°C
Connection to the supply: No connection to mains.
1.1.2 - Additional requirements:
Exposure to extreme temperatures, excessive dust, moisture or vibration; to flammable gases; to
corrosive or explosive atmospheres:
This equipment is intended to operate in a "normal" environment (Offices and homes).
Electromedical equipment connected to the patient:
This equipment is not an electromedical equipment intended to be physically connected to a patient.
Equipment used in vehicles, ships or aircrafts, in tropical countries, or at elevations > 2000m:
This equipment is intended to operate in a "normal" environment (Offices and homes).
The equipment under tests is a Class III computer speaker system with two mains speakers of 4ohm
powered by a detachable Limited Power Source adaptor with a non-specialized type connector. The
adaptor model S024Ez1800120 / JBL is supplied with 0.6A 100-240V~ 50-60Hz and output 1200mA
18VDC. The external power supplied is approved by IEC 60950 with limited power source (Report No.
12014166 001 by TUV Rh) (refer to summary of testing). The computer speaker system is considered as
IT product.
Circuit characteristics: The equipment contains secondary (SELV).
Maximum recommended ambient (Tmra): 40°C
Connection to the supply: No connection to mains.
1.1.2 - Additional requirements:
Exposure to extreme temperatures, excessive dust, moisture or vibration; to flammable gases; to
corrosive or explosive atmospheres:
This equipment is intended to operate in a "normal" environment (Offices and homes).
Electromedical equipment connected to the patient:
This equipment is not an electromedical equipment intended to be physically connected to a patient.
Equipment used in vehicles, ships or aircrafts, in tropical countries, or at elevations > 2000m:
This equipment is intended to operate in a "normal" environment (Offices and homes).
- Page 8 of 51 -
www.nemko.com
Report No. 114383
TRF No.:IECEN60950_1B
IEC 60950-1 / EN 60950-1
Clause
Requirement – Test
Result – Remark
Verdict
1 GENERAL
—
1.5 Components
—
1.5.1 General
—
Comply with IEC 60950 or relevant component
standard
standard
(see appended table 1.5.1)
P
1.5.2
Evaluation and testing of components
Certified components are used
in accordance with their ratings,
certifications and they comply
with applicable parts of this
standard.
Components not certified are
used in accordance with their
ratings and they comply with
applicable parts of IEC 60950-1
and the relevant component
standard.
Components, for which no
relevant IEC-standard exists,
have been tested under the
conditions occurring in the
equipment, using applicable
parts of IEC 60950-1.
in accordance with their ratings,
certifications and they comply
with applicable parts of this
standard.
Components not certified are
used in accordance with their
ratings and they comply with
applicable parts of IEC 60950-1
and the relevant component
standard.
Components, for which no
relevant IEC-standard exists,
have been tested under the
conditions occurring in the
equipment, using applicable
parts of IEC 60950-1.
P
1.5.3
Thermal controls
No thermal controls.
N/A
1.5.4 Transformers
Class III equipment to be
supplied by a separately
approved power supply with an
SELV output. Power supply is
evaluated. Refer to Summary of
Testing.
supplied by a separately
approved power supply with an
SELV output. Power supply is
evaluated. Refer to Summary of
Testing.
N/A
1.5.5 Interconnecting
cables
No interconnecting cables.
N/A
1.5.6
Capacitors in primary circuits .............................:
Class III equipment.
N/A
1.5.7
Double insulation or reinforced insulation bridged
by components
by components
Class III equipment.
N/A
1.5.7.1 General
Refer
below:
—
1.5.7.2
Bridging capacitors
Class III equipment.
N/A
1.5.7.3
Bridging resistors
Class III equipment.
N/A
1.5.7.4
Accessible parts
Class III equipment.
N/A
1.5.8
Components in equipment for IT power systems
Class III equipment.
N/A
Click on the first or last page to see other DUET II (serv.man7) service manuals if exist.