JBL DUET II (serv.man7) EMC - CB Certificate ▷ View online
- Page 25 of 51 -
www.nemko.com
Report No. 114383
TRF No.:IECEN60950_1B
IEC 60950-1 / EN 60950-1
Clause
Requirement – Test
Result – Remark
Verdict
A.1.5 Test
procedure
N/A
A.1.6 Compliance
criteria
N/A
Sample 1 burning time (s) .................................. :
—
Sample 2 burning time (s) .................................. :
—
Sample 3 burning time (s) .................................. :
—
A.2
Flammability test for fire enclosures of movable equipment having a total mass not
exceeding 18 kg, and for material and components located inside fire enclosures
(see 4.7.3.2 and 4.7.3.4)
exceeding 18 kg, and for material and components located inside fire enclosures
(see 4.7.3.2 and 4.7.3.4)
N/A
A.2.1 Samples, material............................................... :
—
Wall
thickness (mm) ........................................... :
—
A.2.2
Conditioning of samples
N/A
A.2.3
Mounting of samples
N/A
A.2.4 Test
flame
N/A
A.2.5 Test
procedure
N/A
A.2.6 Compliance
criteria
N/A
Sample 1 burning time (s) .................................. :
—
Sample 2 burning time (s) .................................. :
—
Sample 3 burning time (s) .................................. :
—
A.2.7
Alternative test acc. to IEC 60695-2-2, cl. 4, 8
N/A
Sample 1 burning time (s) .................................. :
—
Sample 2 burning time (s) .................................. :
—
Sample 3 burning time (s) .................................. :
—
A.3
Hot flaming oil test (see 4.6.2)
N/A
A.3.1
Mounting of samples
N/A
A.3.2
Test procedure
N/A
A.3.3 Compliance
criterion
N/A
B
ANNEX B, MOTOR TESTS UNDER ABNORMAL CONDITIONS (see 4.7.2.2 and
5.3.2)
5.3.2)
—
B.1
General requirements
No motor.
N/A
Position
...............................................................:
—
Manufacturer ......................................................:
—
Type
....................................................................:
—
Rated
values ......................................................:
—
B.2 Test
conditions
N/A
- Page 26 of 51 -
www.nemko.com
Report No. 114383
TRF No.:IECEN60950_1B
IEC 60950-1 / EN 60950-1
Clause
Requirement – Test
Result – Remark
Verdict
B.3 Maximum
temperatures
N/A
B.4
Running overload test
N/A
B.5
Locked-rotor overload test
N/A
Test
duration (days) ............................................:
—
Electric strength test: test voltage (V) .................:
—
B.6
Running overload test for d.c. motors in
secondary circuits
secondary circuits
N/A
B.7
Locked-rotor overload test for d.c. motors in secondary circuits
N/A
B.7.1
Test procedure
N/A
B.7.2
Alternative test procedure; test time (h) ...............:
N/A
B.7.3
Electric strength test
N/A
B.8
Test for motors with capacitors
N/A
B.9
Test for three-phase motors
N/A
B.10
Test for series motors
N/A
Operating
voltage (V) .........................................:
—
C
ANNEX C, TRANSFORMERS (see 1.5.4 and 5.3.3)
—
Position
...............................................................:
No isolating transformer.
—
Manufacturer ......................................................:
—
Type
....................................................................:
—
Rated
values ......................................................:
—
Method of protection........................................... :
—
C.1 Overload
test
N/A
C.2 Insulation
N/A
Protection from displacement of windings...........:
N/A
D
ANNEX D, MEASURING INSTRUMENTS FOR TOUCH-CURRENT TESTS (see
5.1.4)
5.1.4)
—
D.1
Measuring instrument
Class III equipment.
N/A
D.2
Alternative measuring instrument
N/A
E
ANNEX E, TEMPERATURE RISE OF A WINDING (see 1.4.13)
N/A
F
ANNEX F, MEASUREMENT OF CLEARANCES AND CREEPAGE DISTANCES
(see 2.10)
(see 2.10)
N/A
- Page 27 of 51 -
www.nemko.com
Report No. 114383
TRF No.:IECEN60950_1B
IEC 60950-1 / EN 60950-1
Clause
Requirement – Test
Result – Remark
Verdict
G
ANNEX G, ALTERNATIVE METHOD FOR DETERMINING MINIMUM
CLEARANCES
CLEARANCES
N/A
G.1
Summary of the procedure for determining
minimum clearances
minimum clearances
Alternative method not used.
N/A
G.2
Determination of mains transient voltage (V) ..... :
N/A
G.2.1
AC mains supply
N/A
G.2.2
DC mains supply
N/A
G.3
Determination of telecommunication network
transient voltage (V) ........................................... :
transient voltage (V) ........................................... :
N/A
G.4
Determination of required withstand voltage (V) :
N/A
G.5
Measurement of transient voltage levels (V)...... :
N/A
G.6 Determination
of
minimum clearances............... :
N/A
H
ANNEX H, IONIZING RADIATION (see 4.3.13)
N/A
J
ANNEX J, TABLE OF ELECTROCHEMICAL POTENTIALS (see 2.6.5.6)
P
Metal
used ...........................................................:
—
K
ANNEX K, THERMAL CONTROLS (see 1.5.3 and 5.3.7)
N/A
K.1
Making and breaking capacity
No thermal control.
N/A
K.2
Thermostat reliability; operating voltage (V)........:
N/A
K.3
Thermostat endurance test; operating voltage
(V) ......................................................................:
(V) ......................................................................:
N/A
K.4
Temperature limiter endurance; operating voltage
(V) .......................................................................:
(V) .......................................................................:
N/A
K.5
Thermal cut-out reliability
N/A
K.6
Stability of operation
N/A
L
ANNEX L, NORMAL LOAD CONDITIONS FOR SOME TYPES OF ELECTRICAL
BUSINESS EQUIPMENT (see 1.2.2.1 and 4.5.1)
BUSINESS EQUIPMENT (see 1.2.2.1 and 4.5.1)
N/A
L.1
Typewriters
N/A
L.2
Adding machines and cash registers
N/A
L.3 Erasers
N/A
L.4 Pencil
sharpeners
N/A
L.5
Duplicators and copy machines
N/A
- Page 28 of 51 -
www.nemko.com
Report No. 114383
TRF No.:IECEN60950_1B
IEC 60950-1 / EN 60950-1
Clause
Requirement – Test
Result – Remark
Verdict
L.6 Motor-operated
files
N/A
L.7
Other business equipment
N/A
M
ANNEX M, CRITERIA FOR TELEPHONE RINGING SIGNALS (see 2.3.1)
N/A
M.1
Introduction
No telephone ringing signal.
N/A
M.2
Method A
N/A
M.3 Method
B
N/A
M.3.1 Ringing
signal
N/A
M.3.1.1 Frequency (Hz) ...................................................:
—
M.3.1.2 Voltage (V) ..........................................................:
—
M.3.1.3 Cadence;
time (s), voltage (V) ............................:
—
M.3.1.4 Single
fault current (mA)......................................:
—
M.3.2 Tripping
device
and monitoring voltage ..............:
N/A
M.3.2.1
Conditions for use of a tripping device or a
monitoring voltage
monitoring voltage
N/A
M.3.2.2 Tripping
device
N/A
M.3.2.3 Monitoring voltage (V) .........................................:
N/A
N
ANNEX N, IMPULSE TEST GENERATORS (see 2.10.3.4, 6.2.2.1, 7.3.2 and
clause G.5)
clause G.5)
N/A
N.1
ITU-T impulse test generators
The impulse test generator not
used.
used.
N/A
N.2
IEC 60065 impulse test generator
N/A
P
ANNEX P, NORMATIVE REFERENCES
P
Q
ANNEX Q, BIBLIOGRAPHY
P
R
ANNEX R, EXAMPLES OF REQUIREMENTS FOR QUALITY CONTROL
PROGRAMMES
PROGRAMMES
N/A
R.1
Minimum separation distances for unpopulated
coated printed boards (see 2.10.6)
coated printed boards (see 2.10.6)
The quality control programmes
are not used.
are not used.
N/A
R.2
Reduced clearances (see 2.10.3)
N/A
S
ANNEX S, PROCEDURE FOR IMPULSE TESTING (see 6.2.2.3)
N/A
S.1
Test equipment
The impulse testing is not used.
N/A
Click on the first or last page to see other DUET II (serv.man7) service manuals if exist.