JBL DUET 200 (serv.man3) EMC - CB Certificate ▷ View online
- Page 5 of 62 -
Report
No. 111798
TRF No. IECEN60950_1C
General product information:
The equipment under tests is a Class III computer speaker system with two mains speakers of 4ohm
The equipment under tests is a Class III computer speaker system with two mains speakers of 4ohm
powered by a detachable Limited Power Source adaptor with a non-specialized type connector. The
computer
speaker system is considered as IT product.
Normal operating condition: Supplied 1KHz sine wave for speakers in computer speaker system and obtain
1/8 Maximum non-clipped output power
Circuit characteristics: The equipment contains secondary (SELV).
Maximum recommended ambient (Tmra): 40°C
Connection to the supply: No connection to mains.
1.1.2 - Additional requirements:
Exposure to extreme temperatures, excessive dust, moisture or vibration; to flammable gases; to corrosive
or explosive atmospheres:
This equipment is intended to operate in a "normal" environment (Offices and homes).
Electromedical equipment connected to the patient:
This equipment is not an electromedical equipment intended to be physically connected to a patient.
Equipment used in vehicles, ships or aircrafts, in tropical countries, or at elevations > 2000m:
This equipment is intended to operate in a "normal" environment (Offices and homes).
Normal operating condition: Supplied 1KHz sine wave for speakers in computer speaker system and obtain
1/8 Maximum non-clipped output power
Circuit characteristics: The equipment contains secondary (SELV).
Maximum recommended ambient (Tmra): 40°C
Connection to the supply: No connection to mains.
1.1.2 - Additional requirements:
Exposure to extreme temperatures, excessive dust, moisture or vibration; to flammable gases; to corrosive
or explosive atmospheres:
This equipment is intended to operate in a "normal" environment (Offices and homes).
Electromedical equipment connected to the patient:
This equipment is not an electromedical equipment intended to be physically connected to a patient.
Equipment used in vehicles, ships or aircrafts, in tropical countries, or at elevations > 2000m:
This equipment is intended to operate in a "normal" environment (Offices and homes).
The product has been tested according to standard IEC 60950-1:2005 (2
nd
Edition) / EN 60950-1:2006
and those deviations taken into account of
CENELEC common modifications
United Kingdom
Canadian
Singapore
Finland
Denmark
Ireland
Korean
Chinese
Sweden
Germany
Spain
US
Japanese
Norway
Switzerland
Australian
Israeli
- Page 6 of 62 -
Report
No. 111798
TRF No. IECEN60950_1C
These tests fulfil the requirements of standard EN ISO/IEC 17025.
This test report includes the following documents:
Test report, pages .............
62 Deviation list, pages .......
US differences
5
Deviation list, pages .......
Japanese differences
Japanese differences
6
Deviation list, pages ..........
Australian differences
Australian differences
8 Deviation list, page .........
Israeli differences
1
Annexes, page ................
(in test report)
(in test report)
--
Deviation list, pages ..........
Canadian differences
Canadian differences
5 Deviation list, pages .......
Singapore differences
2
Photos, pages ..................
5
Deviation list, page ..........
Korean differences
Korean differences
1 Deviation list, page .........
Chinese differences
1
List of used measuring instruments and other test devices, pages ...................................................
N
- Page 7 of 62 -
Report
No. 111798
IEC 60950-1:2005 / EN 60950-1:2006
Clause
Requirement + Test
Result - Remark
Verdict
TRF No. IECEN60950_1C
1 GENERAL
—
1.5 Components
—
1.5.1 General
—
Comply with IEC 60950 or relevant component
standard
standard
(see appended table 1.5.1)
P
1.5.2
Evaluation and testing of components
Certified components are used
in accordance with their ratings,
certifications and they comply
with applicable parts of this
standard.
Components not certified are
used in accordance with their
ratings and they comply with
applicable parts of IEC 60950-1
and the relevant component
standard.
Components, for which no
relevant IEC-standard exists,
have been tested under the
conditions occurring in the
equipment, using applicable
parts of IEC 60950-1.
in accordance with their ratings,
certifications and they comply
with applicable parts of this
standard.
Components not certified are
used in accordance with their
ratings and they comply with
applicable parts of IEC 60950-1
and the relevant component
standard.
Components, for which no
relevant IEC-standard exists,
have been tested under the
conditions occurring in the
equipment, using applicable
parts of IEC 60950-1.
P
1.5.3
Thermal controls
No thermal controls.
N
1.5.4 Transformers
Class III equipment to be
supplied by a separately
approved power supply with an
SELV output. Power supply not
evaluated. Refer to Summary of
Testing.
supplied by a separately
approved power supply with an
SELV output. Power supply not
evaluated. Refer to Summary of
Testing.
N
1.5.5
Interconnecting cables
The interconnecting cables
contain only SELV.
contain only SELV.
P
1.5.6
Capacitors bridging insulation
Class III equipment.
N
1.5.7
Resistors bridging insulation
Refer below:
—
1.5.7.1
Resistors bridging functional, basic or supplementary
insulation
insulation
No such component.
N
1.5.7.2
Resistors bridging double or reinforced insulation
between a.c. mains and other circuits
between a.c. mains and other circuits
No resistors bridging double or
reinforced insulation.
reinforced insulation.
N
1.5.7.3
Resistors bridging double or reinforced insulation
between a.c. mains and antenna or coaxial cable
between a.c. mains and antenna or coaxial cable
No resistors bridging double or
reinforced insulation.
reinforced insulation.
N
- Page 8 of 62 -
Report
No. 111798
IEC 60950-1:2005 / EN 60950-1:2006
Clause
Requirement + Test
Result - Remark
Verdict
TRF No. IECEN60950_1C
1.5.7.4 Accessible
parts
N
1.5.8
Components in equipment for IT power systems
No components connected
between line and earth.
between line and earth.
N
1.5.9
Surge suppressors
See below.
—
1.5.9.1 General
See
below.
N
1.5.9.2
Protection of VDRs
No such parts.
N
1.5.9.3
Bridging of functional insulation by a VDR
No such parts.
N
1.5.9.4
Bridging of basic insulation by a VDR
No such parts.
N
1.5.9.5
Bridging of supplementary, double or reinforced
insulation by a VDR
insulation by a VDR
No such parts.
N
1.6 Power
interface
—
1.6.1
AC power distribution systems
Class III equipment.
N
1.6.2 Input
current
(see appended table 1.6.2)
P
1.6.3
Voltage limit of hand-held equipment
The equipment is not hand-held
N
1.6.4
Neutral conductor
Class III equipment.
N
Measuring instrument
Inv. no.
Date
1.7
Marking and instructions
—
1.7.1
Power rating
The required marking is located
on the outside surface of the
equipment.
on the outside surface of the
equipment.
P
Rated voltage(s) or voltage range(s) (V) ...............: 18V DC
—
Symbol for nature of supply, for d.c. only...............: IEC 60417-1, symbol No. 5031,
is used.
P
Rated frequency or rated frequency range (Hz) ...: DC rated.
N
Rated current (mA or A) ........................................: 1.2A
P
Manufacturer’s name or trade-mark or identification
mark .......................................................................:
mark .......................................................................:
JBL P
Model identification or type reference ...................: jbl duet - 200
P
Click on the first or last page to see other DUET 200 (serv.man3) service manuals if exist.