JBL DUET 200 (serv.man3) EMC - CB Certificate ▷ View online
- Page 29 of 62 -
Report
No. 111798
IEC 60950-1:2005 / EN 60950-1:2006
Clause
Requirement + Test
Result - Remark
Verdict
TRF No. IECEN60950_1C
5.1.2.2
Redundant multiple connections to an a.c. mains
supply
supply
N
5.1.2.3
Simultaneous multiple connections to an a.c. mains
supply
supply
N
5.1.3 Test
circuit
N
5.1.4
Application of measuring instrument
N
5.1.5 Test
procedure
N
5.1.6 Test
measurements
N
Supply
voltage (V) ................................................:
⎯
Measured touch current (mA) ..............................:
⎯
Max. allowed touch current (mA) .........................:
⎯
Measured protective conductor current (mA) .......:
⎯
Max. allowed protective conductor current (mA)...:
⎯
5.1.7
Equipment with touch current exceeding 3,5 mA
N
5.1.7.1 General .................................................................:
N
5.1.7.2
Simultaneous multiple connections to the supply
N
5.1.8
Touch currents to telecommunication networks and
cable distribution systems and from
telecommunication networks
cable distribution systems and from
telecommunication networks
Not connected to a
telecommunication network nor
a cable distribution system.
telecommunication network nor
a cable distribution system.
N
5.1.8.1
Limitation of the touch current to a telecommunication
network or to a cable distribution system
network or to a cable distribution system
N
Supply
voltage (V) ................................................:
⎯
Measured touch current (mA) ..............................:
⎯
Max. allowed touch current (mA) .........................:
⎯
5.1.8.2
Summation of touch currents from telecommunication
networks
networks
N
a) EUT with earthed telecommunication ports .....:
N
b) EUT whose telecommunication ports have no
reference to protective earth
reference to protective earth
N
- Page 30 of 62 -
Report
No. 111798
IEC 60950-1:2005 / EN 60950-1:2006
Clause
Requirement + Test
Result - Remark
Verdict
TRF No. IECEN60950_1C
Measuring instrument
Inv. no.
Date
5.2 Electric
strength
⎯
5.2.1
General
Functional insulation, no test
required.
required.
N
5.2.2
Test procedure
N
Measuring instrument
Inv. no.
Date
5.3
Abnormal operating and fault conditions
⎯
5.3.1
Protection against overload and abnormal operation
(see appended table 5.3)
P
5.3.2
Motors
There is no motor in the
equipment.
equipment.
N
5.3.3
Transformers
There are no safety
transformers in the equipment.
transformers in the equipment.
N
5.3.4 Functional
insulation .............................................: Complies with c).
P
5.3.5
Electromechanical components
No electromechanical
components in secondary
circuits.
components in secondary
circuits.
N
5.3.6
Audio amplifiers in ITE .........................................:
See the enclosed fault
condition tests.
condition tests.
P
5.3.7
Simulation of faults
See the enclosed fault
condition tests.
condition tests.
P
5.3.8 Unattended
equipment
No
thermostats, temperauter
limiters or thermal cut-outs.
N
5.3.9
Compliance criteria for abnormal operating and fault
conditions
conditions
See below.
P
5.3.9.1
During the tests
No fire or molten metal
occurred and no deformation of
enclosure during the tests.
occurred and no deformation of
enclosure during the tests.
P
- Page 31 of 62 -
Report
No. 111798
IEC 60950-1:2005 / EN 60950-1:2006
Clause
Requirement + Test
Result - Remark
Verdict
TRF No. IECEN60950_1C
5.3.9.2
After the tests
No hazard. Class III equipment
P
Measuring instrument
Inv. no.
Date
6
CONNECTION TO TELECOMMUNICATION NETWORKS
⎯
6.1
Protection of telecommunication network service persons, and users of other
equipment connected to the network, from hazards in the equipment
equipment connected to the network, from hazards in the equipment
⎯
6.1.1
Protection from hazardous voltages
⎯
6.1.2
Separation of the telecommunication network from earth
⎯
6.1.2.1
Requirements
No TNV circuit.
N
Supply
voltage (V) ................................................:
⎯
Current in the test circuit (mA) ...........................:
⎯
6.1.2.2 Exclusions ............................................................:
N
Measuring instrument
Inv. no.
Date
6.2
Protection of equipment users from overvoltages on telecommunication networks
⎯
6.2.1 Separation
requirements
N
6.2.2
Electric strength test procedure
N
6.2.2.1 Impulse
test
N
6.2.2.2 Steady-state
test
N
6.2.2.3 Compliance
criteria
N
Measuring instrument
Inv. no.
Date
- Page 32 of 62 -
Report
No. 111798
IEC 60950-1:2005 / EN 60950-1:2006
Clause
Requirement + Test
Result - Remark
Verdict
TRF No. IECEN60950_1C
6.3
Protection of the telecommunication wiring system from overheating
⎯
Max. output current (A) .........................................:
⎯
Current
limiting method ........................................:
⎯
Measuring instrument
Inv. no.
Date
7
CONNECTION TO CABLE DISTRIBUTION SYSTEMS
⎯
7.1
General
Not connected to Cable
Distribution System.
Distribution System.
N
7.2
Protection of cable distribution system service
persons, and users of other equipment connected to
the system, from hazardous voltages in the equipment
persons, and users of other equipment connected to
the system, from hazardous voltages in the equipment
N
7.3
Protection of equipment users from overvoltages on
the cable distribution system
the cable distribution system
N
7.4
Insulation between primary circuits and cable
distribution systems
distribution systems
N
7.4.1 General
N
7.4.2
Voltage surge test
N
7.4.3 Impulse
test
N
Measuring instrument
Inv. no.
Date
A
ANNEX A, TESTS FOR RESISTANCE TO HEAT AND FIRE
⎯
A.1
Flammability test for fire enclosures of movable
equipment having a total mass exceeding 18 kg, and
of stationary equipment (see 4.7.3.2)
equipment having a total mass exceeding 18 kg, and
of stationary equipment (see 4.7.3.2)
Not used.
N
A.1.1 Samples ................................................................:
⎯
Wall
thickness (mm)..............................................:
⎯
A.1.2
Conditioning of samples; temperature (
°C) ..........:
N
Click on the first or last page to see other DUET 200 (serv.man3) service manuals if exist.