JBL CS EMC - CB Certificate ▷ View online
Page 34 of 45
Report No. 703637
IEC
60065
Clause
Requirement – Test
Result - Remark
Verdict
TRF No.: IEC60065F
TRF Originator: ASTA BEAB
GROUP DIFFERENCES FOR AMENDMENT 1
COMMON MODIFICATIONS
5.1 i)
in EN 60065:2002
Replace the note by:
NOTE For RATED POWER CONSUMPTION measurements of TVs reference is made to
EN 62087. Measurements are done in the ON (play) operating mode.
Replace the note by:
NOTE For RATED POWER CONSUMPTION measurements of TVs reference is made to
EN 62087. Measurements are done in the ON (play) operating mode.
N/A
5.4.1
Add the following indent:
za) A warning that excessive sound pressure from earphones and headphones can cause
hearing loss.
za) A warning that excessive sound pressure from earphones and headphones can cause
hearing loss.
N/A
6.1
6.1
6.1
in EN 60065:2002
Replace the subclause by:
Replace the subclause by:
Ionizing radiation
Equipment that might produce ionizing radiation is checked by measuring the amount of radiation.
The amount of radiation is determined by means of a radiation monitor of the ionizing chamber
Equipment that might produce ionizing radiation is checked by measuring the amount of radiation.
The amount of radiation is determined by means of a radiation monitor of the ionizing chamber
type with an effective area of 1 000 mm2 or by measuring equipment of other types giving
equivalent results.
Measurements are made with the equipment on test operating at the most unfavourable supply
voltage (see 4.2) and with operator controls and service controls adjusted so as to give maximum
radiation whilst maintaining the equipment operative for normal use.
equivalent results.
Measurements are made with the equipment on test operating at the most unfavourable supply
voltage (see 4.2) and with operator controls and service controls adjusted so as to give maximum
radiation whilst maintaining the equipment operative for normal use.
1 μSv/h (0,1 mR/h) (see Note). Account shall be taken of the background level.
NOTE These values appear in Directive 96/29/Euratom.
NOTE These values appear in Directive 96/29/Euratom.
N/A
Bibliography
in EN
in EN
60065:2002
Replace the paragraph related to prEN 50332-2 by:
EN 50332-2:2003, Sound system equipment: Headphones and earphones associated with
portable audio equipment - Maximum sound pressure level measurement methodology and limit
considerations - Part 2: Matching of sets with headphones if either or both are offered separately
EN 60065:2002/A1:2006 - 4 -
EN 50332-2:2003, Sound system equipment: Headphones and earphones associated with
portable audio equipment - Maximum sound pressure level measurement methodology and limit
considerations - Part 2: Matching of sets with headphones if either or both are offered separately
EN 60065:2002/A1:2006 - 4 -
P
Bibliography
in IEC
60065:2001/A
1:2005
in IEC
60065:2001/A
1:2005
Add the following notes for the standards indicated:
IEC 60598-2-9 NOTE Harmonized as EN 60598-2-9:1989 + A1:1994 (not modified).
IEC 60598-2-17 NOTE Harmonized as EN 60598-2-17:1989 + A2:1991 (not modified).
IEC 60598-2-9 NOTE Harmonized as EN 60598-2-9:1989 + A1:1994 (not modified).
IEC 60598-2-17 NOTE Harmonized as EN 60598-2-17:1989 + A2:1991 (not modified).
P
Page 35 of 45
Report No. 703637
IEC
60065
Clause
Requirement – Test
Result - Remark
Verdict
TRF No.: IEC60065F
TRF Originator: ASTA BEAB
National differences Germany
IEC 60065:2001 + A1
(See also Group Differences)
CENELEC / DE 06 II
6.1
The following requirement applies:
For the operation of any cathode ray tube
intended for the display of visual images
operating at an acceleration voltage exceeding 40
kV, authorization is required, or application of
type approval (Bauartzulassung) and marking.
For the operation of any cathode ray tube
intended for the display of visual images
operating at an acceleration voltage exceeding 40
kV, authorization is required, or application of
type approval (Bauartzulassung) and marking.
Justification
:
N/A
Page 36 of 45
Report No. 703637
IEC
60065
Clause
Requirement – Test
Result - Remark
Verdict
TRF No.: IEC60065F
TRF Originator: ASTA BEAB
National differences Denmark
IEC 60065:2001 + A1
(See also Group Differences)
CB Bulletin 112A / DK 06 II
2.6.1
The following is added:
Certain types of CLASS I apparatus, see 15.1.1, may
be provided with a plug not establishing earthing
continuity when inserted in Danish socket-outlets
Justification:
Heavy Current Regulations, Section 107
Certain types of CLASS I apparatus, see 15.1.1, may
be provided with a plug not establishing earthing
continuity when inserted in Danish socket-outlets
Justification:
Heavy Current Regulations, Section 107
N/A
15.1.1
To the first paragraph the following is added:
In Denmark, supply cords of single phase appliances
having a rated current not exceeding 13 A shall be
provided with a plug according to the Heavy Current
Regulations Section 107-2-D1.
Appliances of CLASS I provided with socket-outlets
with earth contact or which are intended to be used in
locations where protection against indirect contact is
required according to the wiring rules shall be provided
with a plug in accordance with the Heavy Current
Regulations Section 107-2-D1 standard sheet DK 2-1a.
To the second paragraph the following is added:
Socket outlets intended for provided power to CLASS II
apparatus with a rated current of 2.5 A shall have the
following dimensions:
In Denmark, supply cords of single phase appliances
having a rated current not exceeding 13 A shall be
provided with a plug according to the Heavy Current
Regulations Section 107-2-D1.
Appliances of CLASS I provided with socket-outlets
with earth contact or which are intended to be used in
locations where protection against indirect contact is
required according to the wiring rules shall be provided
with a plug in accordance with the Heavy Current
Regulations Section 107-2-D1 standard sheet DK 2-1a.
To the second paragraph the following is added:
Socket outlets intended for provided power to CLASS II
apparatus with a rated current of 2.5 A shall have the
following dimensions:
Dimensions in mm
Other dimensions shall be in compliance with the
Heavy Current Regulations, Section 107-2-D1,
Standard Sheet DKA 1-3 for portable socket-outlets.
Shutters are not required.
To the third paragraph the following is added:
Mains socket-outlets with earthing contact shall be in
compliance with the Heavy Current Regulations,
Section 107-2-D1, Standard Sheet DK 1-3a, DK 1-5a
or DK 1-7a.
Justification
Other dimensions shall be in compliance with the
Heavy Current Regulations, Section 107-2-D1,
Standard Sheet DKA 1-3 for portable socket-outlets.
Shutters are not required.
To the third paragraph the following is added:
Mains socket-outlets with earthing contact shall be in
compliance with the Heavy Current Regulations,
Section 107-2-D1, Standard Sheet DK 1-3a, DK 1-5a
or DK 1-7a.
Justification
:
Heavy Current Regulations, Section 107
P
Page 37 of 45
Report No. 703637
IEC
60065
Clause
Requirement – Test
Result - Remark
Verdict
TRF No.: IEC60065F
TRF Originator: ASTA BEAB
National differences Ireland
IEC 60065:2001 + A1
(See also Group Differences)
CENELEC / IE 06 II
Apparatus which is fitted with a flexible cable or
cord shall be provided with a 13 A plug in
accordance with Statutory Instrument 525:97, “13
A Plugs and Conversion Adapters for Domestic
Use Regulations:1997.
cord shall be provided with a 13 A plug in
accordance with Statutory Instrument 525:97, “13
A Plugs and Conversion Adapters for Domestic
Use Regulations:1997.
Justification:
SI 525: 1997
The power supply cord set for
Ireland was not evaluated
together with the apparatus. A
suitable certified supply cord
set has to be added in the
country were the apparatus
will be sold.
Ireland was not evaluated
together with the apparatus. A
suitable certified supply cord
set has to be added in the
country were the apparatus
will be sold.
P
National differences United Kingdom
IEC 60065:2001 + A1
(See also Group Differences)
CB Bulletin 112A / GB 06 II
15.1.1
Apparatus which is fitted with a flexible cable or
cord and is designed to be connected to a mains
socket conforming to BS 1363 by means of that
flexible cable or cord and plug shall be fitted with
a ”standard plug” in accordance with Statutory
Instrument 1768: 1994: The Plugs and Sockets
etc. (Safety) Regulations 1994, unless exempted
by those Regulations.
NOTE ”Standard plug” is defined in SI 1768:1994
and essentially means an approved plug
conforming to BS 1363 or an approved
conversion plug.
Justification
cord and is designed to be connected to a mains
socket conforming to BS 1363 by means of that
flexible cable or cord and plug shall be fitted with
a ”standard plug” in accordance with Statutory
Instrument 1768: 1994: The Plugs and Sockets
etc. (Safety) Regulations 1994, unless exempted
by those Regulations.
NOTE ”Standard plug” is defined in SI 1768:1994
and essentially means an approved plug
conforming to BS 1363 or an approved
conversion plug.
Justification
: SI 1768: 1994
The power supply cord set for
UK was not evaluated together
with the apparatus. A suitable
certified supply cord set has to
be added in the country were
the apparatus will be sold.
UK was not evaluated together
with the apparatus. A suitable
certified supply cord set has to
be added in the country were
the apparatus will be sold.
P
National differences Italy
IEC 60065:2001 + A1
(See also Group Differences)
CENELEC / IT 06 II
5.1
Additional markings on the outside of the TV
receiver in Italian language
receiver in Italian language
N/A
User instructions in Italian language including a
conformity declaration
conformity declaration
N/A
Certification number on the back cover
N/A
Click on the first or last page to see other CS service manuals if exist.