JBL CONTROL 2.4G (serv.man9) EMC - CB Certificate ▷ View online
Registration number: «Registriernummer»-E-16
ETS PRODUCT SERVICE AG
STORKOWER STRASSE 38C-15526 REICHENWALDE B. BERLIN Page 28 of 50
RF Electromagnetic Field (900 MHz) /
Test Equipment
a) Antenna (BTA-H)
For your reference please find it in our test equipment list at page 9 to 17 as number : 472.
b) Generator SMG (R&S)
For your reference please find it in our test equipment list at page 9 to 17 as number : 155.
c) Amplifier (AR)
For your reference please find it in our test equipment list at page 9 to 17 as number : 448.
d) Video camera system
For your reference please find it in our test equipment list at page 9 to 17 as number : 71.
e) Interphone system
For your reference please find it in our test equipment list at page 9 to 17 as number : 72.
f) Anechoic chamber
For your reference please find it in our test equipment list at page 9 to 17 as number : 86.
g) Software
ETS RF-Field v.27.09.2005
Test Procedures
a) Antenna (BTA-H)
For your reference please find it in our test equipment list at page 9 to 17 as number : 472.
b) Generator SMG (R&S)
For your reference please find it in our test equipment list at page 9 to 17 as number : 155.
c) Amplifier (AR)
For your reference please find it in our test equipment list at page 9 to 17 as number : 448.
d) Video camera system
For your reference please find it in our test equipment list at page 9 to 17 as number : 71.
e) Interphone system
For your reference please find it in our test equipment list at page 9 to 17 as number : 72.
f) Anechoic chamber
For your reference please find it in our test equipment list at page 9 to 17 as number : 86.
g) Software
ETS RF-Field v.27.09.2005
Test Procedures
• Test configuration
The test configuration is contained inside of a shielded chamber and corresponds to the standard EN
61000-4-3 /5/. The equipment under test is placed inside of the anechoic chamber and the
transmitting antenna is placed in a height of 1.5m, in a distance of 3.0m to the EUT. (see Picture 8)
The RF-generators are placed in a special room adjacent to the chamber. The observation of the
equipment under test is realized by a video camera and by a microphone. In order to establish the
severity of the test, for EUTs and wires, which must be tested close to the earth reference plane or
which have larger sides than 1,5m x 1,5 m, the intensity of the field is also recorded at 0,4 m height,
and for the full width and height of the EUT.
The tests normally shall be performed with the generating antenna facing each of four sides of the
EUT. When equipment can be used in different orientations (e.g. vertical or horizontal) the test
shall be performed on all possible sides of the EUT.
61000-4-3 /5/. The equipment under test is placed inside of the anechoic chamber and the
transmitting antenna is placed in a height of 1.5m, in a distance of 3.0m to the EUT. (see Picture 8)
The RF-generators are placed in a special room adjacent to the chamber. The observation of the
equipment under test is realized by a video camera and by a microphone. In order to establish the
severity of the test, for EUTs and wires, which must be tested close to the earth reference plane or
which have larger sides than 1,5m x 1,5 m, the intensity of the field is also recorded at 0,4 m height,
and for the full width and height of the EUT.
The tests normally shall be performed with the generating antenna facing each of four sides of the
EUT. When equipment can be used in different orientations (e.g. vertical or horizontal) the test
shall be performed on all possible sides of the EUT.
• Test parameters and marginal conditions
The tests are carried out with field strength by 3V/m and 900 MHz measured in the modulated field
with pulse-modulated signal repeating frequency 217 Hz. Further information please find in test
protocol.
with pulse-modulated signal repeating frequency 217 Hz. Further information please find in test
protocol.
Registration number: «Registriernummer»-E-16
ETS PRODUCT SERVICE AG
STORKOWER STRASSE 38C-15526 REICHENWALDE B. BERLIN Page 29 of 50
RF Electromagnetic Field (80-1000 MHz)
Test Equipment
a) Antenna (BTA-H)
For your reference please find it in our test equipment list at page 9 to 17 as number : 472.
b) Generator SMG (R&S)
For your reference please find it in our test equipment list at page 9 to 17 as number : 155.
c) Amplifier (AR)
For your reference please find it in our test equipment list at page 9 to 17 as number : 448.
d) Video camera system
For your reference please find it in our test equipment list at page 9 to 17 as number : 71.
e) Interphone system
For your reference please find it in our test equipment list at page 9 to 17 as number : 72.
f) Anechoic chamber
For your reference please find it in our test equipment list at page 9 to 17 as number : 86.
g) Software
ETS RF-Field v.27.09.2005
Test Procedures
a) Antenna (BTA-H)
For your reference please find it in our test equipment list at page 9 to 17 as number : 472.
b) Generator SMG (R&S)
For your reference please find it in our test equipment list at page 9 to 17 as number : 155.
c) Amplifier (AR)
For your reference please find it in our test equipment list at page 9 to 17 as number : 448.
d) Video camera system
For your reference please find it in our test equipment list at page 9 to 17 as number : 71.
e) Interphone system
For your reference please find it in our test equipment list at page 9 to 17 as number : 72.
f) Anechoic chamber
For your reference please find it in our test equipment list at page 9 to 17 as number : 86.
g) Software
ETS RF-Field v.27.09.2005
Test Procedures
• Test configuration
The test configuration is contained inside of a shielded chamber and corresponds to the standard EN
61000-4-3 /5/. The equipment under test is placed inside of the anechoic chamber and the
transmitting antenna is placed in a height of 1.5m, in a distance of 3.0m to the EUT. (see Picture 8)
The RF-generators are placed in a special room adjacent to the chamber. The observation of the
equipment under test is realized by a video camera and by a microphone. In order to establish the
severity of the test, for EUTs and wires, which must be tested close to the earth reference plane or
which have larger sides than 1,5m x 1,5 m, the intensity of the field is also recorded at 0,4 m height,
and for the full width and height of the EUT.
The tests normally shall be performed with the generating antenna facing each of four sides of the
EUT. When equipment can be used in different orientations (e.g. vertical or horizontal) the test
shall be performed on all possible sides of the EUT.
61000-4-3 /5/. The equipment under test is placed inside of the anechoic chamber and the
transmitting antenna is placed in a height of 1.5m, in a distance of 3.0m to the EUT. (see Picture 8)
The RF-generators are placed in a special room adjacent to the chamber. The observation of the
equipment under test is realized by a video camera and by a microphone. In order to establish the
severity of the test, for EUTs and wires, which must be tested close to the earth reference plane or
which have larger sides than 1,5m x 1,5 m, the intensity of the field is also recorded at 0,4 m height,
and for the full width and height of the EUT.
The tests normally shall be performed with the generating antenna facing each of four sides of the
EUT. When equipment can be used in different orientations (e.g. vertical or horizontal) the test
shall be performed on all possible sides of the EUT.
• Test parameters and marginal conditions
The tests are carried out with a field strength by 3 V/m (measured in the unmodulated field) with
amplitude modulated signal by a depth of 80 % by a sinusoidal audio signal of 1 kHz. The
logarithmic step was 1% and the dwell time was 1s dependent of the EUT cycle time. Further
information please find in test protocol.
amplitude modulated signal by a depth of 80 % by a sinusoidal audio signal of 1 kHz. The
logarithmic step was 1% and the dwell time was 1s dependent of the EUT cycle time. Further
information please find in test protocol.
Registration number: «Registriernummer»-E-16
ETS PRODUCT SERVICE AG
STORKOWER STRASSE 38C-15526 REICHENWALDE B. BERLIN Page 30 of 50
Picture 8
RF - Field according to
EN 61000 - 4 - 3
Field-generating
antenna
Lines > 3 m
or not defined
or not defined
Irradiated length
has to be 1 m
0,8 m
Absorber elements placed as
required in partly covered
anechoice chambers to reduce
the ground reflexion
the ground reflexion
Absorber or
disturbance
filter
Uniform area
Non-conductive
table
Lines < 3 m
on 1 m total length,
low-induction
low-induction
bunched
Real cabling
< 1 m
< 1 m
Registration number: «Registriernummer»-E-16
ETS PRODUCT SERVICE AG
STORKOWER STRASSE 38C-15526 REICHENWALDE B. BERLIN Page 31 of 50
Transient common mode
Test Equipment
a) ECAT control center
For your reference please find it in our test equipment list at page 9 to 17 as number : 53.
b) EFT simulator
For your reference please find it in our test equipment list at page 9 to 17 as number : 54.
c) Module network coupler
For your reference please find it in our test equipment list at page 9 to 17 as number : 55.
d) Capacitive coupling clamp
For your reference please find it in our test equipment list at page 9 to 17 as number : 58.
e) PC system
For your reference please find it in our test equipment list at page 9 to 17 as number : 82.
f) Power supply
For your reference please find it in our test equipment list at page 9 to 17 as number : 46 to 50.
g) Software
E 400 Vers. 4.15
Test Procedures
• Test configuration
The test configuration complies with the standard EN 61000-4-4 /6/. The EUT is placed on a
insulating support 0,1 meter over the isolated ground reference plane. (see Picture 9).
• Test parameters and marginal conditions
The tests are carried out with 1 kV open circuit voltage on AC and/or DC power lines. The applied
voltage please find in the test protocol.
Click on the first or last page to see other CONTROL 2.4G (serv.man9) service manuals if exist.