JBL CINEMA 610 EMC - CB Certificate ▷ View online
Page 3 of 99
Report No.: 17032770 001
TRF No. IEC60065K
List of Attachments (including a total number of pages in each attachment):
Photo documentation (8 pages)
Summary of testing:
Tests performed (name of test and test clause):
1) The Maximum ambient temperature is 45°C.
2) EUT is designed for altitudes up to and including 2000m above sea level.
3) Following tests performed during evaluation.
Clause
Test
5
Durability of Marking Test
5.1
Input Current Test
7.1
Heating under Normal Operations
7.2
Vicat Softening Test
9.1.1.1
Touch Current
9.1.3
Check ventilation holes by test pin
9.1.4
Terminal Device Test
9.1.6
Plug Discharge Test
9.1.7
Resistance to External Forces (50 N)
10.2
Humidity Test
10.3
Insulation Resistance and Electric Strength
11.1
Touch Current under Fault Conditions
11.2
Heating under Fault Conditions
12.1.1
Bump Test
12.1.2
Vibration test
12.1.3
Impact Test
12.1.5
Thermoplastic enclosures stress relief test
13.2
Working Voltages
13.3 & 13.4
Clearance & Creepage Measurements
17.1
Torque test for fixing screws
19.1
Test on a plane
19.2
100N Test
Testing location:
See page 2.
Page 4 of 99
Report No.: 17032770 001
TRF No. IEC60065K
Summary of compliance with National Differences
List of countries addressed:
EU Group Differences, EU Special National Conditions, EU A-Deviations, AT, AU, BE, CA*, CH, CN*, CZ,
DE, DK, FI, FR, GB, GR, HU, IT, JP*, KR, MY*, NL, NO, PL, SE, SI, SK, US*.
DE, DK, FI, FR, GB, GR, HU, IT, JP*, KR, MY*, NL, NO, PL, SE, SI, SK, US*.
AT=Austria, AU=Australia, BE=Belgium, CA=Canada, CH=Switzerland, CN=China, CZ=Czech Republic,
DE=Germany, DK=Denmark, FI=Finland, FR=France, GB=United Kingdom, GR=Greece, HU=Hungary,
IT=Italy, JP=Japan, KR=Korea, MY=Malaysia, NL=The Netherlands, NO=Norway, PL=Poland,
SE=Sweden, SI=Slovenia, SK=Slovakia, US=United States of America.
DE=Germany, DK=Denmark, FI=Finland, FR=France, GB=United Kingdom, GR=Greece, HU=Hungary,
IT=Italy, JP=Japan, KR=Korea, MY=Malaysia, NL=The Netherlands, NO=Norway, PL=Poland,
SE=Sweden, SI=Slovenia, SK=Slovakia, US=United States of America.
*For these countries accepting IEC 60065: 2001 + A1 only.
For National Differences see end of this test report.
Copy of marking plate
The use of certification marks on a product must be authorized by the respective NCBs that own these
marks.
marks.
Remark:
‘YY-MM-DD’ on above label denotes manufacture date.
Page 5 of 99
Report No.: 17032770 001
TRF No. IEC60065K
Test item particulars .............................................. :
Classification of installation and use .................... : Class II
Supply Connection ................................................ : Appliance inlet used
............................................................................... :
Possible test case verdicts:
- test case does not apply to the test object ..........: N/A (Not Applicable)
- test object does meet the requirement.................: P (Pass)
- test object does not meet the requirement ..........: F (Fail)
Testing:
Date of receipt of test item .....................................: May 09, 2013
Date (s) of performance of tests .............................: May 23
– May 28, 2013
General remarks:
The test results presented in this report relate only to the object tested.
This report shall not be reproduced, except in full, without the written approval of the Issuing testing
laboratory.
"(see Enclosure #)" refers to additional information appended to the report.
"(see appended table)" refers to a table appended to the report.
Throughout this report a
This report shall not be reproduced, except in full, without the written approval of the Issuing testing
laboratory.
"(see Enclosure #)" refers to additional information appended to the report.
"(see appended table)" refers to a table appended to the report.
Throughout this report a
comma /
point is used as the decimal separator.
Manufacturer’s Declaration per sub-clause 6.2.5 of IECEE 02:
The application for obtaining a CB Test Certificate
includes more than one factory location and a
declaration from the Manufacturer stating that the
sample(s) submitted for evaluation is (are)
representative of the products from each factory
has been provided .................................................. :
includes more than one factory location and a
declaration from the Manufacturer stating that the
sample(s) submitted for evaluation is (are)
representative of the products from each factory
has been provided .................................................. :
Yes
Not applicable
Name and address of factory (ies) ........................ : Evervictory Electronic Co., Ltd.
Chu-chi Management District, Hu-men Town,
Dongguan, Guangdong, P.R. China
Dongguan, Guangdong, P.R. China
General product information:
The EUT covered by this report is a Home Theater Subwoofer, which is connected to the output of Low-
Frequency Effects (LFE) channel on receiver or amplifier and is powered by AC mains.
Frequency Effects (LFE) channel on receiver or amplifier and is powered by AC mains.
The product mainly consists of:
1.
Built-in power board.
2.
Enclosure (metal, wooden, plastic)
3.
Speaker
Mass of main unit: approx. 8 kg.
